Re: Booting HURD
Date: Fri, 23 Jul 1999 19:19:18 +0400
From: Vitaly Lugovsky <vsl@murphy.debian.org>
I have a problem with booting Hurd from IDE secondary master.
It's Grub name is hd1, root= (hd1,0). GNUmach and serverboot starts,
and then serversboot can't find it's configuration script at
/dev/hd2s0/boot/servers.boot
All other device names don't work too.
Why? Is it GNUmach bug?
The way partitions are named is a bit confusing. While the drive
numbers are 0-based (hd0, hd1, hd2, etc.) the partitions are 1-based
(hd2s1, hd2s2, etc.) So you probably have to specify
/dev/hd2s1/boot/servers.boot if the configuration script is located on
the first partition of the master drive on the secundary IDE interface
(hd2s1 corresponds to hdc1 on Linux).
Mark
Reply to: