Re: open issues with the hppa port
On Mon, Sep 28, 2009 at 07:22:14PM -0400, Kyle McMartin wrote:
> On Mon, Sep 28, 2009 at 02:09:09PM -0600, dann frazier wrote:
> > On Mon, Sep 28, 2009 at 04:08:28PM -0400, Carlos O'Donell wrote:
> > > On Mon, Sep 28, 2009 at 2:50 PM, dann frazier <dannf@dannf.org> wrote:
> > > >> I'm still working on providing you with a new kernel for penalosa.
> > > >
> > > > Just fyi, peri has been up 2 weeks.
> > > >
> > > > penalosa had been up 13 days, but crashed in the past day or so. The
> > > > console log follows.
> > > >
> > > > This is more evidence that the instability issues are following the
> > > > penalosa hardware.
> > >
> > > Are you saying that you believe penalosa is more prone to crashes than peri?
> >
> > Yes, very much so.
> >
>
> Can you give us the dump of, er, crap, I don't recall... "INventory ALL"
> or something like that next time you're at the PDC rom? Especially
> whichever command dumps the firmware version and ASIC revisions.
Main Menu: Enter command > in all
PROCESSOR INFORMATION
HVERSION SVERSION CVERSION Processor
Processor Speed Model Model/Op (Revision) State
--------- -------- -------- -------- ---------- -------------
0 750 MHz 0x5dd0 0x0491 515 Active
1 750 MHz 0x5dd0 0x0491 515 Idle
Central Bus Speed: 120 MHz
Software ID: 2001606322 (dec)
Software ID: 0x774e16b2 (hex)
Software Capability: 0xf0
<Press any key to continue (q to quit)>
COPROCESSOR INFORMATION
Coprocessor Coprocessor Coprocessor
Processor Model Revision State
----------- ----------- ----------- -----------------
0 0x00000013 1 Functional
1 0x00000013 1 Functional
CACHE INFORMATION
Processor Instruction Cache Size Data Cache Size
----------- ----------------------- ---------------
0 768 kB 1536 kB
1 768 kB 1536 kB
<Press any key to continue (q to quit)>
MEMORY INFORMATION
MEMORY STATUS TABLE
Slots Size(A) Status(A) Size(B) Status(B)
----- ------- ------------- ------- -------------
0a/0b 1GB Active 1GB Active
1a/1b 1GB Active 1GB Active
2a/2b 1GB Active 1GB Active
3a/3b 1GB Active 1GB Active
4a/4b 1GB Active 1GB Active
5a/5b 1GB Active 1GB Active
6a/6b 1GB Active 1GB Active
7a/7b 1GB Active 1GB Active
TOTAL MEMORY = 16384MB
<Press any key to continue (q to quit)>
MEMORY FAULT TABLE
Slots Size(A) Status(A) Size(B) Status(B)
----- ------- ------------- ------- -------------
<Press any key to continue (q to quit)>
Memory Installation Guidelines
------------------------------
- For best performance, load DIMMs in ascending slot order: 0, 1, 2, ...
- For DIMMs to work, both DIMMs in a slot pair (a/b) must be the same type.
(Same part number = same type)
<Press any key to continue (q to quit)>
Active, Installed Memory : 16384MB of SDRAM
Deallocated Pages : 0 Pages
-----------
Available Memory : 16384MB
Good Memory Required by OS : 32MB
Memory
HVERSION SVERSION
-------- ----------
0x00a0 0x0900
<Press any key to continue (q to quit)>
I/O MODULE INFORMATION
IODC IODC
Path Decimal Type Location HVER SVER Vers Dep
------------ ----------- --------------------- ---------- ---- ---- ---- ----
LAN 10/0/12/0 Ethernet built-in 0040 a200 0x02 0x00
AUDIO 10/0/13/0 Audio built-in
IDE 10/0/14/0 IDE built-in 0040 a300 0x00 0x00
SUPERIO MISC 10/0/14/1 Bridge Device built-in
SERIAL_1 10/0/14/1/1 RS232 Port built-in 0040 8c00 0x01 0x00
SERIAL_2 10/0/14/1/2 RS232 Port built-in 0040 8c00 0x01 0x00
USB 10/0/14/2 USB built-in 0040 a900 0x98 0x00
SCSI 10/0/15/0 SCSI built-in 0040 a300 0x00 0x00
FWSCSI 10/0/15/1 SCSI built-in 0040 a300 0x00 0x00
<Press any key to continue (q to quit)>
BOOT INFORMATION
Processor Boot ID
--------- -------
0 2
1 2
Auto boot: ON
Auto search: ON
Auto start: ON
Secure flag: OFF
Fastboot: OFF
Primary boot path: FWSCSI.5.0
Alternate boot path: SCSI.6.0
Console path: SERIAL_1.9600.8.none
Keyboard path: USB
LAN Station Address: 00306e-2b2881
Tue Sep 29 00:25:00 GMT 2009 (20:09:09:29:00:25:00)
<Press any key to continue (q to quit)>
FIRMWARE INFORMATION
Firmware Version: 2.0
4136
CHIP REVISIONS
Module Revision
------------------- --------
System Board 3
PA 8700-8700 CPU 2.3
PA 8700-8700 CPU 2.3
Mem/IO Controller 2.1
PCI Controller #0 4.0
PCI Controller #2 4.0
PCI Controller #4 4.0
PCI Controller #6 4.0
PDC 2.0 (2 MB)
Micro Controller 1.3
Backplane 0
<Press any key to continue (q to quit)>
WARNINGS
No warnings to report.
> I'm correct they're both A500's, right?
Nope - both J class.
--
dann frazier
Reply to: