Re : lenny / testing : missing USB device files
> > I am unable to find any USB device files on my system (HP C360, debian testing
> > 2.6.26-1) and to plug any USB device.
> >
> > lspri -v | grep HCI
> > 02.08.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
> > 02:08.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
> > 02:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
> >
> > It seems that the USB controller was detected at boot time since the drivers
> > are loaded :
> > lsmod
> > [...]
> > ohci_hcd 38568 0
> > ehci_hcd 53328 0
> > [...]
> >
> > This problem did not occur under Debian/etch.
> >
> > Now, how to mount USB storages ?
> > Is there a workaround ?
>
>
> What exactly are you missing? The /dev/XXX files?
> Which ones where there in etch which are not there yet?
Unfortunately, I don't have an etch system running any more.
I don't recall this exactly, it was probably /dev/usb[0-4].
> Maybe you can post a dmesg file?
>
> Helge
Here is the dmesg file :
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-parisc (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 Sat Jan 10 17:34:01 UTC 2009
[ 0.000000] FP[0] enabled: Rev 1 Model 16
[ 0.000000] The 32-bit Kernel has started...
[ 0.000000] console [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: System Map.
[ 0.000000] model 00005c60 00000481 00000000 00000002 778fcc50 100000f0 00000008 000000b2 000000b2
[ 0.000000] vers 00000100
[ 0.000000] CPUID vers 14 rev 0 (0x000001c0)
[ 0.000000] capabilities 0x2
[ 0.000000] model 9000/785/C360
[ 0.000000] Total Memory: 2304 MB
[ 0.000000] initrd: 4f917000-4ffee6f9
[ 0.000000] initrd: reserving 3f917000-3ffee6f9 (mem_max 90000000)
[ 0.000000] On node 0 totalpages: 589824
[ 0.000000] Normal zone: 4608 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 585216 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] LED display at f0190001 registered
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 585216
[ 0.000000] Kernel command line: root=/dev/sda8 HOME=/ console=tty0 sti=8/0/1/0 sti_font=VGA8x16 TERM=linux palo_kernel=2/vmlinux
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Console: colour dummy device 160x64
[17179569.236000] console handover: boot [ttyB0] -> real [tty0]
[17179569.304000] Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes)
[17179569.340000] Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes)
[17179569.776000] Memory: 2322432k/2359296k available (1961k kernel code, 36624k reserved, 882k data, 224k init)
[17179569.776000] virtual kernel memory layout:
[17179569.776000] vmalloc : 0x00008000 - 0x0f000000 ( 239 MB)
[17179569.776000] memory : 0x10000000 - 0xa0000000 (2304 MB)
[17179569.776000] .init : 0x10410000 - 0x10448000 ( 224 kB)
[17179569.776000] .data : 0x102ea6c4 - 0x103c7000 ( 882 kB)
[17179569.776000] .text : 0x10100000 - 0x102ea6c4 (1961 kB)
[17179569.780000] Calibrating delay loop... 731.13 BogoMIPS (lpj=1462272)
[17179569.872000] Security Framework initialized
[17179569.872000] SELinux: Disabled at boot.
[17179569.872000] Capability LSM initialized
[17179569.872000] Mount-cache hash table entries: 512
[17179569.872000] Initializing cgroup subsys ns
[17179569.872000] Initializing cgroup subsys cpuacct
[17179569.872000] Initializing cgroup subsys devices
[17179569.872000] net_namespace: 648 bytes
[17179569.876000] NET: Registered protocol family 16
[17179569.876000] EISA bus registered
[17179569.876000] Searching for devices...
[17179590.676000] Found devices:
[17179590.676000] 1. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0xf, 0x580, 0x0000b }
[17179590.676000] 2. Dino PCI Bridge at 0xf2000000 [8/0] { 13, 0x3, 0x680, 0x0000a }, additional addresses: 0xf2800000 0xf6000000
[17179590.676000] 3. Raven U/L2 Dino RS-232 at 0xf2003000 [8/0/63] { 10, 0x0, 0x006, 0x0008c }
[17179590.676000] 4. Raven+ w SE FWSCSI Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x056, 0x00081 }, additional addresses: 0xffd0c000 0xffc00000
[17179590.676000] 5. Raven+ w SE FWSCSI Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x056, 0x0008c }
[17179590.676000] 6. Raven+ w SE FWSCSI Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x056, 0x00082 }
[17179590.676000] 7. Raven+ w SE FWSCSI Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x056, 0x00074 }, additional addresses: 0xffd01000 0xffd03000
[17179590.676000] 8. Raven+ w SE FWSCSI Core Audio at 0xffd04000 [8/16/1] { 10, 0x4, 0x056, 0x0007b }
[17179590.676000] 9. Raven+ w SE FWSCSI Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x056, 0x00084 }
[17179590.676000] 10. Raven+ w SE FWSCSI Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x056, 0x00084 }
[17179590.676000] 11. U2-IOA BC GSC+ Port at 0xf203f000 [8/63] { 7, 0x1, 0x501, 0x0000c }
[17179590.676000] 12. Raven U/L2 Dino PS/2 Port at 0xf2001000 [8/1] { 10, 0x0, 0x006, 0x00096 }
[17179590.676000] 13. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0xf, 0x580, 0x0000b }
[17179590.676000] 14. U2-IOA BC GSC+ Port at 0xf103f000 [10/63] { 7, 0x1, 0x501, 0x0000c }
[17179590.676000] 15. Cujo PCI Bridge at 0xf1000000 [10/0] { 13, 0x1, 0x682, 0x0000a }, additional addresses: 0xf1800000
[17179590.676000] 16. Dino RS-232 at 0xf1003000 [10/3] { 10, 0x0, 0x007, 0x0008c }
[17179590.676000] 17. Raven W 360 (9000/780) at 0xfffa0000 [32] { 0, 0x0, 0x5c6, 0x00004 }
[17179590.676000] 18. Memory at 0xfffb1000 [49] { 1, 0x0, 0x097, 0x00009 }
[17179590.676000] Enabling regular chassis codes support v0.05
[17179591.312000] CPU(s): 1 x PA8500 (PCX-W) at 367.111100 MHz
[17179591.316000] Whole cache flush 256059 cycles, flushing 3440640 bytes 1382342 cycles
[17179591.316000] Setting cache flush threshold to 1a0 (1 CPUs online)
[17179591.316000] Found U2 at 0xfff88000
[17179591.340000] Found U2 at 0xfff8a000
[17179591.364000] Lasi version 0 at 0xffd00000 found.
[17179591.380000] Found GeckoBoa at 0xf203f000
[17179591.380000] drivers/parisc/hppb.c: failed to claim HP-PB bus space (00000000, ffffffff)
[17179591.380000] Found GeckoBoa at 0xf103f000
[17179591.380000] drivers/parisc/hppb.c: failed to claim HP-PB bus space (00000000, ffffffff)
[17179591.380000] Dino version 3.1 found at 0xf2000000
[17179591.384000] Cujo version 2.0 found at 0xf1000000
[17179591.384000] Enabling Cujo 2.0 bug workaround
[17179591.388000] PCI: Unable to handle 64-bit address space for bridge 0000:01:04.0
[17179591.388000] PCI: Cannot allocate resource (bogus alignment) 8 [100000:1fffff] (flags 200) of 0000:01:04.0
[17179591.392000] PCI: bogus alignment of resource 8 [100000:1fffff] (flags 200) of 0000:01:04.0
[17179591.392000] PCI: Bridge: 0000:01:04.0
[17179591.392000] IO window: disabled.
[17179591.392000] MEM window: 0x00100000-0x001fffff
[17179591.392000] PREFETCH window: disabled.
[17179591.392000] powersw: Soft power switch at 0xf0140000 enabled.
[17179591.408000] NET: Registered protocol family 2
[17179591.444000] IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179591.448000] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[17179591.492000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179591.496000] TCP: Hash tables configured (established 524288 bind 65536)
[17179591.496000] TCP reno registered
[17179591.508000] NET: Registered protocol family 1
[17179591.508000] checking if image is initramfs... it is
[17179596.108000] Freeing initrd memory: 7005k freed
[17179596.112000] Enabling PDC chassis warnings support v0.05
[17179596.112000] unwind_init: start = 0x1035de10, end = 0x103850f0, entries = 10030
[17179596.116000] audit: initializing netlink socket (disabled)
[17179596.116000] type=2000 audit(1234628527.932:1): initialized
[17179596.120000] VFS: Disk quotas dquot_6.5.1
[17179596.120000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179596.120000] msgmni has been set to 4550
[17179596.124000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[17179596.124000] io scheduler noop registered
[17179596.124000] io scheduler anticipatory registered
[17179596.124000] io scheduler deadline registered
[17179596.124000] io scheduler cfq registered (default)
[17179596.128000] PDC Stable Storage facility v0.30
[17179597.600000] STI GSC/PCI core graphics driver Version 0.9a
[17179597.600000] sti 0000:00:01.0: enabling SERR and PARITY (0002 -> 0142)
[17179597.600000] STI PCI graphic ROM found at f2f80000 (64 kB), fb at f6000000 (32 MB)
[17179597.688000] id 2d08c0a7-9a02587, conforms to spec rev. 8.0a
[17179597.688000] graphics card name: PCI_GRAFFITIX1280
[17179597.688000] sticon: Initializing STI text console.
[17179597.692000] Console: switching to colour STI console 160x64
[17179598.540000] Console: switching to colour frame buffer device 160x64
[17179598.656000] fb0: stifb 1280x1024-8 frame buffer device, PCI_GRAFFITIX1280, id: 2d08c0a7, mmio: 0xf6100000
[17179598.692000] Generic RTC Driver v1.07
[17179598.712000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179598.736000] 8:16:4: ttyS0 at MMIO 0xffd05800 (irq = 16) is a 16550A
[17179598.760000] 8:0:63: ttyS1 at MMIO 0xf2003800 (irq = 21) is a 16550A
[17179598.788000] brd: module loaded
[17179598.808000] serio: GSC PS/2 keyboard port at 0x00020000 irq 20 @ 8:16:7
[17179598.832000] serio: GSC PS/2 mouse port at 0x00022100 irq 20 @ 8:16:8
[17179598.848000] mice: PS/2 mouse device common for all mice
[17179598.876000] TCP cubic registered
[17179598.892000] NET: Registered protocol family 17
[17179598.952000] input: AT Raw Set 2 keyboard as /class/input/input0
[17179598.968000] registered taskstats version 1
[17179598.988000] Freeing unused kernel memory: 224k freed
[17179600.620000] SCSI subsystem initialized
[17179600.700000] 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
[17179600.720000] scsi0: 53c710 rev 2
[17179601.736000] scsi0 : LASI SCSI 53c700
[17179602.400000] scsi 0:0:2:0: CD-ROM TOSHIBA CD-ROM XM-5401TA 1036 PQ: 0 ANSI: 2
[17179602.424000] target0:0:2: Beginning Domain Validation
[17179602.444000] target0:0:2: asynchronous
[17179602.488000] target0:0:2: FAST-5 SCSI 4.2 MB/s ST (236 ns, offset 8)
[17179602.524000] target0:0:2: Domain Validation skipping write tests
[17179602.544000] target0:0:2: Ending Domain Validation
[17179606.428000] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[17179606.456000] tulip0: no phy info, aborting mtable build
[17179606.476000] tulip0: MII transceiver #1 config 1000 status 782d advertising 0061.
[17179606.504000] eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xf2801000, 00:10:83:05:83:a5, IRQ 24.
[17179606.584000] sym0: <875> rev 0x4 at pci 0000:00:13.0 irq 23
[17179606.984000] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
[17179607.004000] sym0: SCSI BUS has been reset.
[17179607.032000] scsi1 : sym-2.2.3
[17179607.292000] usbcore: registered new interface driver usbfs
[17179607.312000] usbcore: registered new interface driver hub
[17179607.488000] Driver 'sr' needs updating - please use bus_type methods
[17179607.688000] sr0: scsi-1 drive
[17179607.708000] Uniform CD-ROM driver Revision: 3.20
[17179607.728000] sr 0:0:2:0: Attached scsi CD-ROM sr0
[17179607.756000] usbcore: registered new device driver usb
[17179607.788000] ohci1394 0000:02:0b.0: enabling device (0150 -> 0152)
[17179607.812000] ohci1394: MMIO resource (0x106000 - 0x106800) unavailable
[17179607.828000] ohci1394: probe of 0000:02:0b.0 failed with error -12
[17179607.912000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[17179607.912000] ohci_hcd: block sizes: ed 64 td 64
[17179607.912000] ohci_hcd 0000:02:08.0: enabling device (0150 -> 0152)
[17179607.932000] ohci_hcd 0000:02:08.0: controller already in use
[17179607.932000] ohci_hcd 0000:02:08.0: init 0000:02:08.0 fail, -16
[17179607.952000] ohci_hcd: probe of 0000:02:08.0 failed with error -16
[17179607.972000] ohci_hcd 0000:02:08.1: enabling device (0150 -> 0152)
[17179607.992000] ohci_hcd 0000:02:08.1: controller already in use
[17179607.992000] ohci_hcd 0000:02:08.1: init 0000:02:08.1 fail, -16
[17179608.012000] ohci_hcd: probe of 0000:02:08.1 failed with error -16
[17179608.056000] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[17179608.056000] ehci_hcd 0000:02:08.2: enabling device (0150 -> 0152)
[17179608.076000] ehci_hcd 0000:02:08.2: controller already in use
[17179608.076000] ehci_hcd 0000:02:08.2: init 0000:02:08.2 fail, -16
[17179608.096000] ehci_hcd: probe of 0000:02:08.2 failed with error -16
[17179608.620000] sr 0:0:2:0: Attached scsi generic sg0 type 5
[17179610.020000] scsi 1:0:0:0: Direct-Access FUJITSU MAT3073NC 5207 PQ: 0 ANSI: 3
[17179610.040000] target1:0:0: tagged command queuing enabled, command queue depth 16.
[17179610.060000] target1:0:0: Beginning Domain Validation
[17179610.084000] target1:0:0: asynchronous
[17179610.116000] target1:0:0: wide asynchronous
[17179610.136000] target1:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
[17179610.160000] target1:0:0: Domain Validation skipping write tests
[17179610.180000] target1:0:0: Ending Domain Validation
[17179610.200000] scsi 1:0:1:0: Direct-Access FUJITSU MAP3735NC 5207 PQ: 0 ANSI: 3
[17179610.220000] target1:0:1: tagged command queuing enabled, command queue depth 16.
[17179610.240000] target1:0:1: Beginning Domain Validation
[17179610.264000] target1:0:1: asynchronous
[17179610.296000] target1:0:1: wide asynchronous
[17179610.316000] target1:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
[17179610.336000] target1:0:1: Domain Validation skipping write tests
[17179610.356000] target1:0:1: Ending Domain Validation
[17179614.200000] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[17179614.220000] scsi 1:0:1:0: Attached scsi generic sg2 type 0
[17179614.660000] Driver 'sd' needs updating - please use bus_type methods
[17179614.736000] sd 1:0:0:0: [sda] 143374744 512-byte hardware sectors (73408 MB)
[17179614.760000] sd 1:0:0:0: [sda] Write Protect is off
[17179614.776000] sd 1:0:0:0: [sda] Mode Sense: d1 00 00 08
[17179614.780000] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[17179614.800000] sd 1:0:0:0: [sda] 143374744 512-byte hardware sectors (73408 MB)
[17179614.832000] sd 1:0:0:0: [sda] Write Protect is off
[17179614.852000] sd 1:0:0:0: [sda] Mode Sense: d1 00 00 08
[17179614.852000] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[17179614.872000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[17179614.920000] sd 1:0:0:0: [sda] Attached SCSI disk
[17179614.988000] sd 1:0:1:0: [sdb] 143571316 512-byte hardware sectors (73509 MB)
[17179615.008000] sd 1:0:1:0: [sdb] Write Protect is off
[17179615.028000] sd 1:0:1:0: [sdb] Mode Sense: b9 00 00 08
[17179615.032000] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[17179615.052000] sd 1:0:1:0: [sdb] 143571316 512-byte hardware sectors (73509 MB)
[17179615.080000] sd 1:0:1:0: [sdb] Write Protect is off
[17179615.100000] sd 1:0:1:0: [sdb] Mode Sense: b9 00 00 08
[17179615.100000] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[17179615.120000] sdb: sdb1 < sdb5 >
[17179615.148000] sd 1:0:1:0: [sdb] Attached SCSI disk
[17179616.948000] kjournald starting. Commit interval 5 seconds
[17179616.964000] EXT3-fs: mounted filesystem with ordered data mode.
[17179623.812000] udevd version 125 started
[17179640.672000] input: PS/2 Logitech Mouse as /class/input/input1
[17179644.828000] Adding 2931820k swap on /dev/sda7. Priority:-1 extents:1 across:2931820k
[17179645.684000] EXT3 FS on sda8, internal journal
[17179648.400000] LASI 82596 driver - Revision: 1.30
[17179648.580000] loop: module loaded
[17179652.020000] kjournald starting. Commit interval 5 seconds
[17179652.052000] EXT3 FS on sda6, internal journal
[17179652.072000] EXT3-fs: mounted filesystem with ordered data mode.
[17179652.116000] kjournald starting. Commit interval 5 seconds
[17179652.152000] EXT3 FS on sdb5, internal journal
[17179652.172000] EXT3-fs: mounted filesystem with ordered data mode.
[17179652.212000] kjournald starting. Commit interval 5 seconds
[17179652.236000] EXT3 FS on sda5, internal journal
[17179652.260000] EXT3-fs: mounted filesystem with ordered data mode.
[17179659.496000] NET: Registered protocol family 10
[17179659.520000] lo: Disabled Privacy Extensions
[17179659.568000] 0000:00:14.0: tulip_stop_rxtx() failed (CSR5 0xf0660000 CSR6 0xb24e2002)
[17179659.568000] eth0: Setting half-duplex based on MII#1 link partner capability of 0021.
[17179670.044000] eth0: no IPv6 routers present
[17179671.764000] lp: driver loaded but no devices found
[17179671.764000] RPC: Registered udp transport module.
[17179671.768000] RPC: Registered tcp transport module.
Reply to: