Re: Trying to boot a C360 with graphic console

[Dirk Van Hertem <dirk.vanhertem@ieee.org>]

Hello,

My c360 works fine, but has the following graphics card:

01:04.0 Display controller: Hewlett-Packard Company A4977A Visualize EG 
(rev 03)

note that i don't know if that card actually works as i use the pc over 
serial cable and ethernet only...

Dirk

Jean-Pierre HOFER wrote:
> Hello,
>
>
> I have tried today to tftpboot my C360 with A4071B graphic adapter with
> the newest image.
> (people.debian.org/~kyle/d-i/hppa/daily/netboot/2.6/boot.img from 09 June
> 2008 00:50).
>
> There is no improvement. The machine do boot and display the following
> message last lines:
>
> 	Console colour dummy device 160x64 
> 	console handover: boot [ttyB0] -> real [tty0]
>
> Next, no Tux, nothing else than a black display and a beating first LED on
> the front panel.
>
> Has someone fisrt-hand experience with running debian-hppa on a C200, C240
> or C360 workstations with a HP A4071B graphic adapter ?
>
>
> Thanks in advance for all hints.
>
> Jean-Pierre
>
>
>   


--
Dirk Van Hertem
ELECTA/ESAT/KULeuven

IEEE member? Vote for Marko: http://www.markodelimar.org/