[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Install fails on 9000/D320 - kernel panic

Hi All,

I am attempting to install Etch on a 9000/D320 system using the
debian-40r3-hppa-netinst.iso image. But the installer always stops
after the following line:
Freeing unused kernel memory: 328k freed

If I leave it at this stage, it output remains unchanged indefinitely.
If I press a key, it give this error:
Kernel panic - not syncing: Kernel Fault

So far, I have tried (based on searches I did on various forums):
- Updating the PDC firmware
- Changing the RAM disk size (21K, 32K, default)
- Add "pdcchassis=0"

The result is always exactly the same.

The same system runs HP-UX 11.00 and 11.11 (32-bit) successfully.

Complete boot output attached.

Does anyone have any suggestions?

Main Menu: Enter command > sea

Searching for potential boot device(s)...
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).

   Path Number        Device Path (dec)        Device Type
   -----------        -----------------        -----------
   P0                 8/4.10                   Random access media       
   P1                 8/4.9                    Random access media       
   P2                 8/4.5                    Random access media       
   P3                 8/16/5.2                 Random access media       
   P4                 8/16/5.0                 Sequential access media   
   P5                 8/16/6.0                 LAN Module

Main Menu: Enter command > bo p3
Interact with IPL (Y, N, or Cancel)?> Y

Boot IO Dependent Code (IODC) revision 144

HARD Booted.
palo ipl 1.14 root@duet Sat Apr  8 16:08:16 EDT 2006

Boot image contains:
    0/vmlinux32 4187837 bytes @ 0xd11000
    0/vmlinux64 5798635 bytes @ 0x789000
    0/ramdisk 4468528 bytes @ 0x33d000

Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current comman:
'0/vmlinux root=/dev/ram initrd=0/ramdisk ramdisk_size=12584' console=ttyB0 TER2
 0: '0/vmlinux
 1: root=/dev/ram
 2: initrd=0/ramdisk
 3: ramdisk_size=12584'
 4: console=ttyB0
 5: TERM=vt102

<#>    edit the numbered field
'b'    boot with this command line
'r'    restore command line
'l'    list dir
? 3
ramdisk_size=21504 pdcchassis=0'
Current command line:
'0/vmlinux root=/dev/ram initrd=0/ramdisk ramdisk_size=21504 pdcchassis=0' cons2
 0: '0/vmlinux
 1: root=/dev/ram
 2: initrd=0/ramdisk
 3: ramdisk_size=21504
 4: pdcchassis=0'
 5: console=ttyB0
 6: TERM=vt102

<#>    edit the numbered field
'b'    boot with this command line
'r'    restore command line
'l'    list dir
? b

Command line for kernel: 'root=/dev/ram ramdisk_size=21504 pdcchassis=0' consol'
Selected kernel: '0/vmlinux from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing 32-bit ke
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 2388648 mediaptr 0x1000
Segment 1 load 00348000 size 499712 mediaptr 0x249000
Segment 2 load 003fc000 size 381062 mediaptr 0x2c3000
Loading ramdisk 4468528 bytes @ 1fbac000...
Branching to kernel entry point 0x00100000.  If this is the last
message you see, you may need to switch your console.  This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org

Linux version 2.6.18-6-parisc (Debian 2.6.18.dfsg.1-18) (dannf@debian.org) (gcc8
FP[0] enabled: Rev 1 Model 15
The 32-bit Kernel has started...
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 00005120 00000481 00000000 00000000 7745416b 100000f0 00000004 000000ba 0a
vers  00000008
CPUID vers 15 rev 8 (0x000001e8)
model 9000/803/D320
Total Memory: 512 MB
initrd: 2fbac000-2ffeef30
initrd: reserving 1fbac000-1ffeef30 (mem_max 20000000)
Built 1 zonelists.  Total pages: 131072
Kernel command line: root=/dev/ram ramdisk_size=21504 pdcchassis=0' console=ttyx
PID hash table entries: 4096 (order: 12, 16384 bytes)
start_kernel(): bug: interrupts were enabled early
Console: colour dummy device 160x64
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 524288k available
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
checking if image is initramfs... it is
Freeing initrd memory: 4363k freed
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Two devices have hardware path [8].  IODC data for second device: 505007000000
Rearranging GSC cards sometimes helps
Found devices:
1. Phantom PseudoBC GSC+ Port at 0xffc00000 [8] { 7, 0x0, 0x504, 0x00000 }
2. Gecko BOA BC GSC+ Port at 0xfff80000 [8/0] { 7, 0x0, 0x500, 0x0000c }
3. Gecko BOA BC HP-PB Port at 0xf103c000 [8/0/60] { 7, 0x0, 0x103, 0x0000c }
4. UltraLight CAP/MUX at 0xf1000000 [8/0/0] { 5, 0x0, 0x010, 0x0000d }
5. Bluefish Add-on FW-SCSI at 0xfff84000 [8/4] { 4, 0x1, 0x013, 0x00089 }
6. Bluefish Add-on FW-SCSI at 0xfff88000 [8/8] { 4, 0x1, 0x013, 0x00089 }
7. Bluefish Add-on FW-SCSI at 0xfff8c000 [8/12] { 4, 0x1, 0x013, 0x00089 }
8. UL 550 Lasi Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x02f, 0x00081 }, additi 
9. UL 550 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x02f, 0x00082 }
10. UL 350 Core LAN (802.3) at 0xffd07000 [8/16/6] { 10, 0x0, 0x02f, 0x0008a }
11. UL 550 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x02f, 0x00074 },  
12. UL 550 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x02f, 0x00084 }
13. UL 550 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x02f, 0x00084 }
14. UL 550 Core Wax BA at 0xffe00000 [8/20] { 11, 0x0, 0x031, 0x0008e }
15. UL 550 Wax EISA BA at 0xfc000000 [8/20/5] { 11, 0x0, 0x031, 0x00090 }, addi 
16. UL 550 Wax Core RS-232 at 0xffe02000 [8/20/2] { 10, 0x0, 0x031, 0x0008c }
17. UL L2 132 (803/D220,D320) at 0xfffbe000 [62] { 0, 0x0, 0x512, 0x00004 }
18. Memory at 0xfffbf000 [63] { 1, 0x0, 0x07f, 0x00009 }
CPU(s): 1 x PA7300LC (PCX-L2) at 132.000000 MHz
Setting cache flush threshold to 18e0 (1 CPUs online)
Lasi version 0 at 0xffd00000 found.
LED display at ffd0c000 registered
wax at 0xffe00000 found.
Wax EISA Adapter found at 0xfc000000
Enumerating EISA bus
EISA slot 8: INP0500 EISA IRQ 10 
EISA: Probing bus 0 at 8:20:5
EISA: Mainboard HWPC051 detected.
EISA: slot 8 : INP0500 detected.
EISA: Detected 1 card.
Found GeckoBoa at 0xfff80000
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 65536 bind 32768)
TCP reno registered
Enabling PDC chassis warnings support v0.05
unwind_init: start = 0x10349cc0, end = 0x1036eaa0, entries = 9438
audit: initializing netlink socket (disabled)
audit(572015924.768:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
EISA EEPROM at 0x00810000
PDC Stable Storage facility v0.30
Soft power switch enabled, polling @ 0xf0140000.
STI GSC/PCI core graphics driver Version 0.9a
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
8:20:2: ttyS0 at MMIO 0xffe02800 (irq = 22) is a 16550A
Serial mux driver (8 ports) Revision: 0.3
ttyB0 at MMIO 0xf1000800 (polled) is a Mux
ttyB1 at MMIO 0xf1000880 (polled) is a Mux
ttyB2 at MMIO 0xf1000900 (polled) is a Mux
ttyB3 at MMIO 0xf1000980 (polled) is a Mux
ttyB4 at MMIO 0xf1000a00 (polled) is a Mux
ttyB5 at MMIO 0xf1000a80 (polled) is a Mux
ttyB6 at MMIO 0xf1000b00 (polled) is a Mux
ttyB7 at MMIO 0xf1000b80 (polled) is a Mux
RAMDISK driver initialized: 16 RAM disks of 21504K size 1024 blocksize
serio: GSC PS/2 keyboard port at 0x00832000 irq 19 @ 8:16:7
serio: GSC PS/2 mouse port at 0x00834100 irq 19 @ 8:16:8
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 328k freed
Kernel panic - not syncing: Kernel Fault

Reply to: