big trouble after apt-get upgrading my HP9000 d360/2
Hi list,
I've got big trouble after apt-get upgrading my HP9000 d360/2
It will not boot anymore!
I'm only able to look with minicom on serial line on this machine.
The last lines I'm seeng is what I pasted below.
(dmesg output is for you to see of which hardware this machine is)
Any hints to bring this server up and running again?
----------------------------------------------------------------------------
-----
udevd-event[3324]: run_program: exec of program
'/lib/udev/udev_run_hotplugd' fa
iled
udevd-event[3325]: run_program: exec of program '/lib/udev/udev_run_devd'
failed
udevd-event[3330]: run_program: exec of program
'/lib/udev/udev_run_hotplugd' fa
iled
udevd-event[3331]: run_program: exec of program '/lib/udev/udev_run_devd'
failed
udevd-event[3337]: run_program: exec of program
'/lib/udev/udev_run_hotplugd' fa
iled
udevd-event[3338]: run_program: exec of program '/lib/udev/udev_run_devd'
failed
udevd-event[3339]: run_program: exec of program
'/lib/udev/udev_run_hotplugd' fa
iled
udevd-event[3340]: run_program: exec of program '/lib/udev/udev_run_devd'
failed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Done.
Begin: Mounting root file system ...
Begin: Running /scripts/local-top ...
Done.
ALERT! /dev/sda5 does not exist. Dropping to a shell!
BusyBox v1.01 (Debian 1:1.01-4) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
/ # cd /lib
/lib # cd udev
/lib/udev # ls
hotplug.functions udevsynthesize vio.agent
/lib/udev # ls -l
-rw-r--r-- 1 0 0 1974 Feb 19 21:52 hotplug.functions
-rwxr-xr-x 1 0 0 25768 Feb 19 21:52 udevsynthesize
-rwxr-xr-x 1 0 0 811 Feb 19 21:52 vio.agent
/lib/udev #
----------------------------------------------------------------------------
--------
# dmesg
Linux version 2.6.12-1-parisc-smp (buildd@sarti) (gcc version 4.0.2 (Debian
4.0.1-9)) #1 SMP Tue Sep 27 11:09:02 UTC 2005
FP[0] enabled: Rev 1 Model 11
The 32-bit Kernel has started...
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 00005a10 00000491 00000000 00000002 7768217e 100000f0 00000004
0000008a 0000008a
vers 0000000d
CPUID vers 11 rev 13 (0x0000016d)
model 9000/851/D360
Total Memory: 512 MB
initrd: 2fe88000-2ffee000
initrd: reserving 1fe88000-1ffee000 (mem_max 20000000)
On node 0 totalpages: 131072
DMA zone: 131072 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
SMP: bootstrap CPU ID is 0
Built 1 zonelists
Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102
palo_kernel=2/vmlinux
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour dummy device 160x64
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 524288k available
Calibrating delay loop... 119.60 BogoMIPS (lpj=598016)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
checking if image is initramfs...it isn't (bad gzip magic numbers); looks
like an initrd
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Found devices:
1. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0x7, 0x580, 0x0000b }
2. UL 550 Lasi Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x02f, 0x00081 },
additional addresses: 0xffd0c000 0xffc00000
3. UL 550 Lasi Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x02f, 0x0008c
}
4. UL 550 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x02f, 0x00082 }
5. UL 350 Core LAN (802.3) at 0xffd07000 [8/16/6] { 10, 0x0, 0x02f, 0x0008a
}
6. UL 550 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x02f, 0x00074
}, additional addresses: 0xffd01000 0xffd03000
7. UL 550 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x02f, 0x00084 }
8. UL 550 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x02f, 0x00084 }
9. UL 550 Core Wax BA at 0xffe00000 [8/20] { 11, 0x0, 0x031, 0x0008e }
10. UL 550 Wax EISA BA at 0xfc000000 [8/20/5] { 11, 0x0, 0x031, 0x00090 },
additional addresses: 0xffc88000
11. UL 550 Wax Core RS-232 at 0xffe02000 [8/20/2] { 10, 0x0, 0x031, 0x0008c
}
12. HP HSC-PCI Cards at 0xf1004000 [8/4] { 4, 0x0, 0x004, 0x0009d }
13. Bluefish Add-on FW-SCSI at 0xf1008000 [8/8] { 4, 0x1, 0x013, 0x00089 }
14. Bluefish Add-on FW-SCSI at 0xf100c000 [8/12] { 4, 0x1, 0x013, 0x00089 }
15. U2-IOA BC GSC+ Port at 0xf103f000 [8/63] { 7, 0x1, 0x501, 0x0000c }
16. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0x7, 0x580, 0x0000b }
17. U2-IOA BC GSC+ Port at 0xf183f000 [10/63] { 7, 0x1, 0x501, 0x0000c }
18. UL 2w T120 1MB/1MB (851/D260,D360) at 0xfffa0000 [32] { 0, 0x0, 0x5a1,
0x00004 }
19. UL 2w T120 1MB/1MB (851/D260,D360) at 0xfffa2000 [34] { 0, 0x0, 0x5a1,
0x00004 }
20. Memory at 0xfffb1000 [49] { 1, 0x0, 0x073, 0x00009 }
CPU0 attaching sched-domain:
domain 0: does not load-balance
Releasing cpu 1 now, hpa=fffa2000
FP[1] enabled: Rev 1 Model 11
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
CPU(s): 2 x PA7200 (PCX-T') at 120.000000 MHz
Whole cache flush 661458 cycles, flushing 273571852 bytes 81555405 cycles
Setting cache flush threshold to 20 (2 CPUs online)
Found U2 at 0xfff88000
Found U2 at 0xfff8a000
Lasi version 0 at 0xffd00000 found.
LED display at ffd0c000 registered
Badness in smp_call_function at arch/parisc/kernel/smp.c:340
Backtrace:
[<10108db0>] cpu_set_eiem+0x0/0x8
[<101166ec>] smp_call_function+0x31c/0x324
[<10108a88>] cpu_enable_irq+0x44/0x58
[<10108aa8>] cpu_startup_irq+0xc/0x1c
[<1015dc90>] setup_irq+0x10c/0x148
[<1011063c>] real32_call+0x130/0x160
[<1015dee0>] request_irq+0xbc/0xd4
[<10251c64>] gsc_alloc_irq+0x18/0x6c
[<10112374>] parisc_driver_probe+0x34/0x74
[<1028f7a4>] driver_probe_device+0x38/0xa0
[<1028f87c>] driver_attach+0x70/0xa4
[<1028f948>] bus_add_driver+0x98/0x148
[<1028f95c>] bus_add_driver+0xac/0x148
[<10104f24>] init+0x198/0x674
[<1010dc5c>] ret_from_kernel_thread+0x1c/0x24
wax at 0xffe00000 found.
Badness in smp_call_function at arch/parisc/kernel/smp.c:340
Backtrace:
[<10108db0>] cpu_set_eiem+0x0/0x8
[<101166ec>] smp_call_function+0x31c/0x324
[<10108a88>] cpu_enable_irq+0x44/0x58
[<10108aa8>] cpu_startup_irq+0xc/0x1c
[<1015dc90>] setup_irq+0x10c/0x148
[<1014b824>] queue_work+0xc0/0x104
[<1015dee0>] request_irq+0xbc/0xd4
[<10251cd8>] gsc_claim_irq+0x20/0x80
[<10112374>] parisc_driver_probe+0x34/0x74
[<1028f7a4>] driver_probe_device+0x38/0xa0
[<1028f87c>] driver_attach+0x70/0xa4
[<1028f948>] bus_add_driver+0x98/0x148
[<10104f24>] init+0x198/0x674
[<1010dc5c>] ret_from_kernel_thread+0x1c/0x24
Wax EISA Adapter found at 0xfc000000
Enumerating EISA bus
EISA slot 8 a configured board was not detected ( expected HWP1510)
EISA: Probing bus 0 at 8:20:5
EISA: Mainboard HWPC051 detected.
EISA: Detected 0 cards.
Dino version 3.x (card mode) found at 0xf1004000
Badness in smp_call_function at arch/parisc/kernel/smp.c:340
Backtrace:
[<10108db0>] cpu_set_eiem+0x0/0x8
[<101166ec>] smp_call_function+0x31c/0x324
[<10108a88>] cpu_enable_irq+0x44/0x58
[<10108aa8>] cpu_startup_irq+0xc/0x1c
[<1015dc90>] setup_irq+0x10c/0x148
[<1015dee0>] request_irq+0xbc/0xd4
[<10251c64>] gsc_alloc_irq+0x18/0x6c
[<10112374>] parisc_driver_probe+0x34/0x74
[<1028f7a4>] driver_probe_device+0x38/0xa0
[<1028f87c>] driver_attach+0x70/0xa4
[<1028f948>] bus_add_driver+0x98/0x148
[<1028f95c>] bus_add_driver+0xac/0x148
[<10104f24>] init+0x198/0x674
[<1010dc5c>] ret_from_kernel_thread+0x1c/0x24
SCSI subsystem initialized
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
unwind_init: start = 0x10399aa0, end = 0x103b99a0, entries = 8176
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
EISA EEPROM at 0xffc88000
PDC Stable Storage facility v0.09
Soft power switch enabled, polling @ 0xf0140000.
STI GSC/PCI core graphics driver Version 0.9a
Generic RTC Driver v1.07
serio: GSC PS/2 keyboard port at 0xffd08000 irq 20 @ 8:16:7
serio: GSC PS/2 mouse port at 0xffd08100 irq 20 @ 8:16:8
Serial: 8250/16550 driver $Revision: 1.90 $ 13 ports, IRQ sharing enabled
ttyS0 at MMIO 0xffd05800 (irq = 16) is a 16550A
ttyS1 at MMIO 0xffe02800 (irq = 23) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
gscps2.c: timeout - could not write byte 0xed
gscps2.c: sending byte 0xed failed.
gscps2.c: timeout - could not write byte 0xed
gscps2.c: sending byte 0xed failed.
IP: routing cache hash table of 1024 buckets, 24Kbytes
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1432KiB [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
|/-\|/-\|/-\|/done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: Badness in smp_call_function at
arch/parisc/kernel/smp.c:340
Backtrace:
[<101166ec>] smp_call_function+0x31c/0x324
[<10106b58>] flush_data_cache+0x24/0x40
[<10105fd8>] free_initmem+0x60/0x1e4
[<101053c4>] init+0x638/0x674
[<1010dc5c>] ret_from_kernel_thread+0x1c/0x24
348k freed
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi0: 53c710 rev 2
scsi0 : LASI SCSI 53c700
Vendor: HP Model: C1537A Rev: HP02
Type: Sequential-Access ANSI SCSI revision: 02
target0:0:0: Beginning Domain Validation
target0:0:0: asynchronous.
target0:0:0: Domain Validation skipping write tests
target0:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
target0:0:0: Ending Domain Validation
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 1
Vendor: TEAC Model: CD-ROM CD-516S Rev: 1.0G
Type: CD-ROM ANSI SCSI revision: 02
target0:0:2: Beginning Domain Validation
target0:0:2: asynchronous.
target0:0:2: Domain Validation skipping write tests
target0:0:2: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
target0:0:2: Ending Domain Validation
Attached scsi generic sg1 at scsi0, channel 0, id 2, lun 0, type 5
st: Version 20050312, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi0, channel 0, id 0, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 131072
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
zalon_probe: Zalon version 1, IRQ 68
ncr53c720-0: rev 0xf irq 68
ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential
Badness in smp_call_function at arch/parisc/kernel/smp.c:340
Backtrace:
[<101166ec>] smp_call_function+0x31c/0x324
[<10108a88>] cpu_enable_irq+0x44/0x58
[<10108aa8>] cpu_startup_irq+0xc/0x1c
[<1015dc90>] setup_irq+0x10c/0x148
[<1015dee0>] request_irq+0xbc/0xd4
[<0001d454>] zalon_probe+0x184/0x268 [zalon7xx]
[<10112374>] parisc_driver_probe+0x34/0x74
[<1028f7a4>] driver_probe_device+0x38/0xa0
[<1028f87c>] driver_attach+0x70/0xa4
[<1028f948>] bus_add_driver+0x98/0x148
[<0001d2b0>] zalon7xx_init+0x20/0x40 [zalon7xx]
[<1015ac68>] sys_init_module+0x1e0/0x4b0
[<1010f184>] syscall_exit+0x0/0x14
scsi1 : ncr53c8xx-3.4.3g
Vendor: SEAGATE Model: ST32171W Rev: HPC1
Type: Direct-Access ANSI SCSI revision: 02
target1:0:5: Beginning Domain Validation
target1:0:5: asynchronous.
WIDTH IS 1
target1:0:5: wide asynchronous.
target1:0:5: Domain Validation skipping write tests
target1:0:5: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
target1:0:5: Ending Domain Validation
Attached scsi generic sg2 at scsi1, channel 0, id 5, lun 0, type 0
Vendor: SEAGATE Model: ST34572WC Rev: HP03
Type: Direct-Access ANSI SCSI revision: 02
target1:0:8: Beginning Domain Validation
target1:0:8: asynchronous.
WIDTH IS 1
target1:0:8: wide asynchronous.
target1:0:8: Domain Validation skipping write tests
target1:0:8: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
target1:0:8: Ending Domain Validation
Attached scsi generic sg3 at scsi1, channel 0, id 8, lun 0, type 0
Vendor: SEAGATE Model: ST34371W Rev: HPM2
Type: Direct-Access ANSI SCSI revision: 02
target1:0:9: Beginning Domain Validation
target1:0:9: asynchronous.
WIDTH IS 1
target1:0:9: wide asynchronous.
target1:0:9: Domain Validation skipping write tests
target1:0:9: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
target1:0:9: Ending Domain Validation
Attached scsi generic sg4 at scsi1, channel 0, id 9, lun 0, type 0
zalon_probe: Zalon version 1, IRQ 69
ncr53c720-1: rev 0xf irq 69
ncr53c720-1: ID 7, Fast-10, Parity Checking, Differential
Badness in smp_call_function at arch/parisc/kernel/smp.c:340
Backtrace:
[<101166ec>] smp_call_function+0x31c/0x324
[<10108a88>] cpu_enable_irq+0x44/0x58
[<10108aa8>] cpu_startup_irq+0xc/0x1c
[<1015dc90>] setup_irq+0x10c/0x148
[<1015dee0>] request_irq+0xbc/0xd4
[<0001d454>] zalon_probe+0x184/0x268 [zalon7xx]
[<10112374>] parisc_driver_probe+0x34/0x74
[<1028f7a4>] driver_probe_device+0x38/0xa0
[<1028f87c>] driver_attach+0x70/0xa4
[<1028f948>] bus_add_driver+0x98/0x148
[<0001d2b0>] zalon7xx_init+0x20/0x40 [zalon7xx]
[<1015ac68>] sys_init_module+0x1e0/0x4b0
[<1010f184>] syscall_exit+0x0/0x14
scsi2 : ncr53c8xx-3.4.3g
SCSI device sda: 4165272 512-byte hdwr sectors (2133 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 4165272 512-byte hdwr sectors (2133 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host1/bus0/target5/lun0: p1 p2 p3 < p5 p6 >
Attached scsi disk sda at scsi1, channel 0, id 5, lun 0
SCSI device sdb: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host1/bus0/target8/lun0:
Attached scsi disk sdb at scsi1, channel 0, id 8, lun 0
SCSI device sdc: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sdc: drive cache: write through
/dev/scsi/host1/bus0/target9/lun0:
Attached scsi disk sdc at scsi1, channel 0, id 9, lun 0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Linux Tulip driver version 1.1.13 (December 15, 2004)
tulip0: MII transceiver #1 config 3100 status 7849 advertising 01e1.
eth0: GSC DS21140 Tulip rev 34 at 80010000, 00:10:83:F5:79:28, IRQ 24.
Adding 112412k swap on /dev/sda6. Priority:-1 extents:1
EXT3 FS on sda5, internal journal
LASI 82596 driver - Revision: 1.30
Found i82596 at 0xffd07000, IRQ 18
eth1: 82596 at 0xffd07000, 08 00 09 E7 D8 23 IRQ 18.
0000:00:01.0: tulip_stop_rxtx() failed (CSR5 0xfc660000 CSR6 0x324e2002)
eth0: Setting half-duplex based on MII#1 link partner capability of 0021.
NET: Registered protocol family 10
Disabled Privacy Extensions on device 10417448(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
----------------------------------------------------------------------------
Greetings,
Juergen Leibner
--
Coffeecup empty - Userpanic!
--
Jürgen Leibner juergen.leibner@t-online.de
Reply to: