Kernel Panic when trying to install on a K200
I'm trying to install Debian on a HP-9000 K200.
The first CD I tried (I think it was 3.1r2) seemed to boot, but it
stopped at "Freeing unused kernel memory". It froze there until I hit
the Enter key and then it gave me a kernel panic. Further keypresses
yielded nothing more.
Then, I went and got Kyle's daily debian build
(http://people.debian.org/~kyle/d-i/hppa/daily/cdrom/2.6/) and that did
pretty much the same thing, but it got one line further... to "Setting
up filesystem, please wait ..." Again, hitting Enter gives a kernel
panic. The full message is:
FLT 0000Kernel panic - not syncing: Kernel Fault
I'll include the full boot report below. Anybody have any ideas of what
I should try? Is this a hardware problem? Are there some boot options I
can try?
--------- Boot Messages -------
HARD Booted.
palo ipl 1.14 root@duet Sat Apr 8 16:08:16 EDT 2006
Boot image contains:
0/vmlinux32 4048205 bytes @ 0x836000
0/vmlinux64 5565856 bytes @ 0x2e7000
0/ramdisk 2938501 bytes @ 0x10800
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current
command line:
0/linux root=/dev/ram0 ramdisk_size=10316 initrd=0/ramdisk conso
102
0: 0/linux
1: root=/dev/ram0
2: ramdisk_size=10316
3: initrd=0/ramdisk
4: console=ttyB0
5: TERM=vt102
<#> edit the numbered field
'b' boot with this command line
'r' restore command line
'l' list dir
? b
Command line for kernel: 'root=/dev/ram0 ramdisk_size=10316 console
t102 palo_kernel=0/linux'
Selected kernel: /linux from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing
32-bit kernelELF32 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 2298516 mediaptr 0x1000
Segment 1 load 00332000 size 487424 mediaptr 0x233000
Segment 2 load 003e4000 size 376965 mediaptr 0x2aa000
Loading ramdisk 2938501 bytes @ 0fd21000...
Branching to kernel entry point 0x00100000. If this is the last message
you see, you may need to switch your console. This is a common symptom
-- search the FAQ and mailing list at parisc-linux.org
Linux version 2.6.17-2-parisc (Debian 2.6.17-6) (waldi@debian.org) (gcc
version 4.0.4 20060730 (prerelease) (Debian 4.0.3-6)) #1 Sat Aug 12
16:40:37 MDT 2006
FP[0] enabled: Rev 1 Model 11
The 32-bit Kernel has started...
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 000058b0 00000491 00000000 00000002 3cb6ed93 100000f1 00000004
0000008a 00008a
vers 0000000d
CPUID vers 11 rev 13 (0x0000016d)
model 9000/819/K200
Total Memory: 256 MB
initrd: 1fd21000-1ffee685
initrd: reserving 0fd21000-0ffee685 (mem_max 10000000)
drivers/parisc/led.c: KittyHawk-Machine (hversion 0x58b) found, LED
detection skipped.
LCD display at f0190000,f0190001 registered
Built 1 zonelists
Kernel command line: root=/dev/ram0 ramdisk_size=10316 console=ttyB0
TERM=vt102 palo_kernel=0/linux
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 160x64
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 262144k available
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 2869k freed
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Found devices:
1. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0x7, 0x580, 0x0000b }
2. KittyHawk GSY Core BA at 0xffd00000 [10/12] { 11, 0x0, 0x015, 0x00081
}, additional addresses: 0xffd0c000 0xffc00000
3. KittyHawk GSY Core SCSI at 0xffd06000 [10/12/5] { 10, 0x0, 0x015,
0x00082 }
4. KittyHawk GSY Core LAN (802.3) at 0xffd07000 [10/12/6] { 10, 0x0,
0x015, 0x0008a }
5. KittyHawk GSY Core Centronics at 0xffd02000 [10/12/0] { 10, 0x0,
0x015, 0x00074 }, additional addresses: 0xffd01000 0xffd03000
6. KittyHawk GSY Core PS/2 Port at 0xffd08000 [10/12/7] { 10, 0x0,
0x015, 0x00084 }
7. KittyHawk GSY Core PS/2 Port at 0xffd08100 [10/12/8] { 10, 0x0,
0x015, 0x00084 }
8. KittyHawk GSY Core FW-SCSI at 0xf1800000 [10/0] { 4, 0x1, 0x015,
0x00089 }
9. Gecko BOA BC GSC+ Port at 0xf1804000 [10/4] { 7, 0x0, 0x500, 0x0000c }
10. Eole CAP/MUX at 0xf1900000 [10/4/0] { 5, 0x0, 0x015, 0x0000d }
11. Skunk SCSI (28655A) at 0xf1908000 [10/4/8] { 4, 0x0, 0x004, 0x00039 }
12. Skunk Centronics (28655A) at 0xf1909000 [10/4/9]
13. Gecko BOA BC HP-PB Port at 0xf193c000 [10/4/60] { 7, 0x0, 0x103,
0x0000c }
14. U2-IOA BC GSC+ Port at 0xf183f000 [10/63] { 7, 0x1, 0x501, 0x0000c }
15. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0x7, 0x580, 0x0000b }
16. U2-IOA BC GSC+ Port at 0xf103f000 [8/63] { 7, 0x1, 0x501, 0x0000c }
17. KittyHawk DC2 100 (K200) at 0xfffa0000 [32] { 0, 0x0, 0x58b, 0x00004
}
18. Memory at 0xfffb1000 [49] { 1, 0x0, 0x053, 0x00009 }
Enabling regular chassis codes support v0.05
CPU(s): 1 x PA7200 (PCX-T') at 100.000000 M
Setting cache flush threshold to 200 (1 CPUs online)
Found U2 at 0xfff8a000
Found U2 at 0xfff88000
Lasi version 0 at 0xffd00000 found.
Found GeckoBoa at 0xf1804000
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
Enabling PDC chassis warnings support v0.05
unwind_init: start = 0x10333b60, end = 0x103572f0, entries = 9081
audit: initializing netlink socket (disabled)
audit(1122162288.120:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PDC Stable Storage facility v0.30
Soft power switch support not available.
STI GSC/PCI core graphics driver Version 0.9a
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Serial mux driver (8 ports) Revision: 0.3
ttyB0 at MMIO 0xf1900800 (polled) is a Mux
ttyB1 at MMIO 0xf1900880 (polled) is a Mux
ttyB2 at MMIO 0xf1900900 (polled) is a Mux
ttyB3 at MMIO 0xf1900980 (polled) is a Mux
ttyB4 at MMIO 0xf1900a00 (polled) is a Mux
ttyB5 at MMIO 0xf1900a80 (polled) is a Mux
ttyB6 at MMIO 0xf1900b00 (polled) is a Mux
ttyB7 at MMIO 0xf1900b80 (polled) is a Mux
RAMDISK driver initialized: 16 RAM disks of 10316K size 1024 blocksize
serio: GSC PS/2 keyboard port at 0x0002a000 irq 19 @ 10:12:7
serio: GSC PS/2 mouse port at 0x0002c100 irq 19 @ 10:12:8
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 324k freed
Setting up filesystem, please wait ...
FLT 0000Kernel panic - not syncing: Kernel Fault
Reply to: