Re: Sarge d-i rc3 failled to install d380 :-(
Hello Richard,
>
> On Wed, Apr 06, 2005 at 05:38:47PM +0200, Joel Soete wrote:
> > Hello all,
> >
> > I just get an old d380 2-way 256Mb ram (from with I removed a broken
remote
> > management card and duno if supported)
> >
> > It's a good oportunity to test sarge d-i (netinstall cd) :-)
> >
> > unfortunately it failled to boot on a well known ramdisk pb:"attempt
to
> access
> > beyond end of device"
>
> The initrd on the hppa d-i rc3 iso seems to be about 21MB:
>
> sh-3.00# zcat /mnt/iso/install/initrd.gz | wc -c
> 21897216
>
> and the kernel is booted with ramdisk_size of 16M:
>
> sh-3.00# strings /home/richard/downloads/sarge-hppa-netinst.iso | grep
ramdisk_size=
> Q0/vmlinux root=/dev/ram initrd=0/ramdisk ramdisk_size=16384 init=/linuxrc
>
> so it is indeed unlikely to work. I don't know the d380; presumably
> you can't interact with IPL to edit the kernel cmdline on that box?
In fact yes (btw all models I know 712, c110, b132, b180, b2000, d380, a500,
Lx000, n4000 can interact with ipl ;-)
>
> I used hexedit to edit the ISO image, so it looked like this:
>
> 00000000 80 00 50 41 4C 4F 00 03 00 E4 88 00 00 41 E7 8D 00 2C 00
00
> ..PALO.......A...,..
> 00000014 00 5F 1F 51 30 2F 76 6D 6C 69 6E 75 78 20 72 6F 6F 74 3D
2F
> ._.Q0/vmlinux root=/
> 00000028 64 65 76 2F 72 61 6D 20 69 6E 69 74 72 64 3D 30 2F 72 61
6D
> dev/ram initrd=0/ram
> 0000003C 64 69 73 6B 20 72 61 6D 64 69 73 6B 5F 73 69 7A 65 3D 33
32
> disk ramdisk_size=32
> 00000050 37 36 38 20 69 6E 69 74 3D 2F 6C 69 6E 75 78 72 63 00 00
00
> 768 init=/linuxrc...
> 00000064 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00
> ....................
>
> I just changed the ramdisk_size value, to 32768.
>
Cool
> (ctrl-X to leave hexedit). Then I burned a CD and booted it on my B180.
> It booted fine, and I got as far as partitioning before I gave up (didn't
> want to overwrite the disk).
>
any way I prefer soft solution by changing interactively ramdisk_size kernel
boot paramter to this recommended value :-)
The cd boot fine and all seems to works fine (just some difficulties with
the partion disk interface: no (more) advance, expert or custom option :-(
).
unfortunately the reboot hang while loading tulip driver (I don't remember
if it's already known issue?);
here is the boot log (in case you will see some mistakes I missed):
HARD Booted.
palo ipl 1.5 root@c3k Fri May 14 16:17:38 MDT 2004
Skipping extended partition 7 - beyond reach of IPL
Partition Start(MB) End(MB) Id Type
1 1 31 f0 Palo
2 32 156 83 ext2
3 157 502 82 swap
5 503 2031 83 ext2
6 2032 2282 83 ext2
PALO(F0) partition contains:
0/vmlinux32 4968722 bytes @ 0x48000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current
command
line:
2/vmlinux root=/dev/sda5 initrd=2/initrd.img HOME=/ console=ttyS0 TERM=vt102
0: 2/vmlinux
1: root=/dev/sda5
2: initrd=2/initrd.img
3: HOME=/
4: console=ttyS0
5: TERM=vt102
<#> edit the numbered field
'b' boot with this command line
'r' restore command line
'l' list dir
? b
Command line for kernel: 'root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102
palo_ke
rnel=2/vmlinux'
Selected kernel: /vmlinux from partition 2
Selected ramdisk: /initrd.img from partition 2
ELF32 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 2832408 mediaptr 0x1000
Segment 1 load 003b4000 size 705472 mediaptr 0x2b5000
Segment 2 load 00464000 size 397328 mediaptr 0x362000
Loading ramdisk 5197824 bytes @ 0faf9000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.6.8-2-32-smp (kyle@caradhras) (gcc version 3.3.5 (Debian
1:3.3.5
-7)) #1 SMP Mon Feb 7 22:19:10 EST 2005
FP[0] enabled: Rev 0 Model 14
The 32-bit Kernel has started...
Determining PDC firmware type: System Map.
model 00005aa0 00000491 00000000 00000002 77872c2d 100000f0 00000008 000000b2
00
0000b2
vers 00000301
CPUID vers 14 rev 11 (0x000001cb)
capabilities 0x3
model 9000/820/D380
Total Memory: 256 Mb
initrd: 1faf9000-1ffee000
initrd: reserving 0faf9000-0ffee000 (mem_max 10000000)
SMP: bootstrap CPU ID is 0
Built 1 zonelists
Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=
2/vmlinux
PID hash table entries: 16 (order 4: 128 bytes)
Console: colour dummy device 160x64
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 262144k available
Calibrating delay loop... 359.62 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Brought up 1 CPUs
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Found devices:
1. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0xf, 0x580, 0x0000b }
2. Bluefish Add-on FW-SCSI at 0xf1004000 [8/4] { 4, 0x1, 0x013, 0x00089 }
3. Bluefish Add-on FW-SCSI at 0xf1008000 [8/8] { 4, 0x1, 0x013, 0x00089 }
4. Bluefish Add-on FW-SCSI at 0xf100c000 [8/12] { 4, 0x1, 0x013, 0x00089
}
5. UL 550 Lasi Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x02f, 0x00081 },
additi
onal addresses: 0xffd0c000 0xffc00000
6. UL 550 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x02f, 0x00074
}, a
dditional addresses: 0xffd01000 0xffd03000
7. UL 550 Lasi Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x02f, 0x0008c
}
8. UL 550 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x02f, 0x00082 }
9. UL 350 Core LAN (802.3) at 0xffd07000 [8/16/6] { 10, 0x0, 0x02f, 0x0008a
}
10. UL 550 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x02f, 0x00084
}
11. UL 550 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x02f, 0x00084
}
12. UL 550 Core Wax BA at 0xffe00000 [8/20] { 11, 0x0, 0x031, 0x0008e }
13. UL 550 Wax Core RS-232 at 0xffe02000 [8/20/2] { 10, 0x0, 0x031, 0x0008c
}
14. UL 550 Wax EISA BA at 0xfc000000 [8/20/5] { 11, 0x0, 0x031, 0x00090 },
addi
tional addresses: 0xffc88000
15. U2-IOA BC GSC+ Port at 0xf103f000 [8/63] { 7, 0x1, 0x501, 0x0000c }
16. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0xf, 0x580, 0x0000b }
17. HP HSC-PCI Cards at 0xf180c000 [10/12] { 4, 0x0, 0x004, 0x0009d }
18. U2-IOA BC GSC+ Port at 0xf183f000 [10/63] { 7, 0x1, 0x501, 0x0000c }
19. UL proc 2-way U180 1M/1M at 0xfffa0000 [32] { 0, 0x0, 0x5aa, 0x00004
}
20. UL proc 2-way U180 1M/1M at 0xfffa2000 [34] { 0, 0x0, 0x5aa, 0x00004
}
21. Memory at 0xfffb1000 [49] { 1, 0x0, 0x07c, 0x00009 }
Releasing cpu 1 now, hpa=fffa2000
FP[1] enabled: Rev 0 Model 14
CPU(s): 2 x PA8000 (PCX-U) at 180.000000 MHz
Found U2 at 0xfff88000
Found U2 at 0xfff8a000
Lasi version 0 at 0xffd00000 found.
LED display at ffd0c000 registered
Wax at 0xffe00000 found.
Wax EISA Adapter found at 0xfc000000
EISA EEPROM: cannot register misc device.
Enumerating EISA bus
EISA: Probing bus 0 at parisc8:20:5
EISA: Mainboard HWPC051 detected.
EISA: Detected 0 cards.
Dino [10/12] version 3.x (card mode) found at 0xf180c000
SCSI subsystem initialized
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
STI GSC/PCI core graphics driver Version 0.9a
unwind_init: start = 0x103b5720, end = 0x103d6f20, entries = 8576
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Soft power switch enabled, polling @ 0xf0140000.
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 25 ports, IRQ sharing enabled
ttyS0 at MMIO 0xffd05800 (irq = 90) is a 16550A
ttyS1 at MMIO 0xffe02800 (irq = 121) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
mice: PS/2 mouse device common for all mice
serio: GSC PS2 keyboard port at 0xffd08000 irq 69 @ parisc8:16:7
serio: GSC PS2 mouse port at 0xffd08100 irq 69 @ parisc8:16:8
HP SDC: No SDC found.
HP SDC MLC: Registering the System Domain Controller's HIL MLC.
HP SDC MLC: Request for raw HIL ISR hook denied
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 12Kbytes
TCP: Hash tables configured (established 4096 bind 6553)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 5076 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: Badness in smp_call_function at arch/parisc/kernel
/smp.c:342
Backtrace:
[<1011963c>] smp_call_function+0x408/0x410
[<101088dc>] flush_data_cache+0x24/0x40
[<10107a38>] free_initmem+0x78/0x38c
[<10103d30>] init+0x304/0x410
[<10110c5c>] ret_from_kernel_thread+0x1c/0x24
344k freed
initrd-tools: 0.1.77
NET: Registered protocol family 1
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi0: 53c710 rev 2
scsi0 : LASI SCSI 53c700
Using anticipatory io scheduler
Vendor: HP Model: HP35480A Rev: 1009
Type: Sequential-Access ANSI SCSI revision: 02
scsi(0:0:0:0): Beginning Domain Validation
scsi0: (0:0) Asynchronous
scsi0: (0:0) Synchronous at offset 8, period 200ns
scsi(0:0:0:0): Domain Validation skipping write tests
scsi(0:0:0:0): Ending Domain Validation
Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 3115
Type: CD-ROM ANSI SCSI revision: 02
scsi(0:0:2:0): Beginning Domain Validation
scsi0: (2:0) Asynchronous
scsi0: (2:0) Synchronous at offset 8, period 236ns
scsi(0:0:2:0): Domain Validation skipping write tests
scsi(0:0:2:0): Ending Domain Validation
Vendor: HP Model: DVD-ROM 6x/32x Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
scsi(0:0:4:0): Beginning Domain Validation
scsi0: (4:0) Asynchronous
scsi0: (4:0) Synchronous at offset 8, period 100ns
scsi(0:0:4:0): Domain Validation skipping write tests
scsi(0:0:4:0): Ending Domain Validation
zalon_probe: Zalon vers field is 0x1, IRQ 36
ncr53c720-0: rev 0xf irq 36
ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential
scsi1 : ncr53c8xx-3.4.3f
Vendor: SEAGATE Model: ST39173WC Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
ncr53c720-0-<5,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
Vendor: SEAGATE Model: ST39236LC Rev: HP02
Type: Direct-Access ANSI SCSI revision: 03
ncr53c720-0-<8,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
Vendor: SEAGATE Model: ST32550W Rev: HP12
Type: Direct-Access ANSI SCSI revision: 02
ncr53c720-0-<9,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
Vendor: SEAGATE Model: ST32550W Rev: HP12
Type: Direct-Access ANSI SCSI revision: 02
ncr53c720-0-<10,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
zalon_probe: Zalon vers field is 0x1, IRQ 37
ncr53c720-1: rev 0xf irq 37
ncr53c720-1: ID 7, Fast-10, Parity Checking, Differential
scsi2 : ncr53c8xx-3.4.3f
Vendor: SEAGATE Model: ST34371W Rev: HPM4
Type: Direct-Access ANSI SCSI revision: 02
ncr53c720-1-<9,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
Vendor: SEAGATE Model: ST34371W Rev: HPM4
Type: Direct-Access ANSI SCSI revision: 02
ncr53c720-1-<10,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
Vendor: SEAGATE Model: ST34371W Rev: HPM4
Type: Direct-Access ANSI SCSI revision: 02
ncr53c720-1-<11,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
Vendor: SEAGATE Model: ST32272WC Rev: HP03
Type: Direct-Access ANSI SCSI revision: 02
ncr53c720-1-<12,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
Vendor: SEAGATE Model: ST15150W Rev: HP12
Type: Direct-Access ANSI SCSI revision: 02
ncr53c720-1-<14,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
Vendor: SEAGATE Model: ST15150W Rev: HP12
Type: Direct-Access ANSI SCSI revision: 02
ncr53c720-1-<15,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
zalon_probe: Zalon vers field is 0x1, IRQ 38
ncr53c720-2: rev 0xf irq 38
ncr53c720-2: ID 7, Fast-10, Parity Checking, Differential
scsi3 : ncr53c8xx-3.4.3f
SCSI device sda: 17783112 512-byte hdwr sectors (9105 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host1/bus0/target5/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
Attached scsi disk sda at scsi1, channel 0, id 5, lun 0
SCSI device sdb: 17783112 512-byte hdwr sectors (9105 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host1/bus0/target8/lun0: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 8, lun 0
SCSI device sdc: 4165272 512-byte hdwr sectors (2133 MB)
SCSI device sdc: drive cache: write through
/dev/scsi/host1/bus0/target9/lun0: unknown partition table
Attached scsi disk sdc at scsi1, channel 0, id 9, lun 0
SCSI device sdd: 4165272 512-byte hdwr sectors (2133 MB)
SCSI device sdd: drive cache: write through
/dev/scsi/host1/bus0/target10/lun0: unknown partition table
Attached scsi disk sdd at scsi1, channel 0, id 10, lun 0
SCSI device sde: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sde: drive cache: write through
/dev/scsi/host2/bus0/target9/lun0: unknown partition table
Attached scsi disk sde at scsi2, channel 0, id 9, lun 0
SCSI device sdf: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sdf: drive cache: write through
/dev/scsi/host2/bus0/target10/lun0: unknown partition table
Attached scsi disk sdf at scsi2, channel 0, id 10, lun 0
SCSI device sdg: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sdg: drive cache: write through
/dev/scsi/host2/bus0/target11/lun0: unknown partition table
Attached scsi disk sdg at scsi2, channel 0, id 11, lun 0
SCSI device sdh: 4165272 512-byte hdwr sectors (2133 MB)
SCSI device sdh: drive cache: write through
/dev/scsi/host2/bus0/target12/lun0: unknown partition table
Attached scsi disk sdh at scsi2, channel 0, id 12, lun 0
SCSI device sdi: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sdi: drive cache: write through
/dev/scsi/host2/bus0/target14/lun0: unknown partition table
Attached scsi disk sdi at scsi2, channel 0, id 14, lun 0
SCSI device sdj: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sdj: drive cache: write through
/dev/scsi/host2/bus0/target15/lun0: unknown partition table
Attached scsi disk sdj at scsi2, channel 0, id 15, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sr1: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.86 booting
Activating swap.
Adding 353420k swap on /dev/sda3. Priority:-1 extents:1
Checking root file system...
fsck 1.35 (28-Feb-2004)
/: clean, 10962/783360 files, 240240/1566306 blocks
EXT3 FS on sda5, internal journal
System time was Thu Apr 7 16:39:26 UTC 2005.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Thu Apr 7 16:39:28 UTC 2005.
Cleaning up ifupdown...done.
Calculating module dependencies... done.
Loading modules...
lasi700
lasi_82596
LASI 82596 driver - Revision: 1.30
Found i82596 at 0xffd07000, IRQ 87
eth0: 82596 at 0xffd07000, 08 00 09 D2 89 15 IRQ 87.
sd_mod
sr_mod
tulip
(btw I plug in this spare j3515 additional nic; may be the sort of pb Matthew
already encountered?)
I will try to manage to reboot from another disk to attempt to fix this boot
pb ;-)
Thanks again for kind help,
Joel
Reply to: