|
Hi list,
I "reanimated" my old 712/80 and installed debian
on it, without running tasksel or dkpg. I used
debian-30r2-hppa-binary-1_NONUS.iso from ftp.de.debian.org
So far so good, it runs stable.
Then I ran tasksel again and marked
1.) X window system
2.) Desktop (incl. KDE & Gnome)
But the process stops and brings back that the x
window system can't be installed. After further investigation I found out that
twm is the package to be blamed. Twm itself is available for hppa, but it is
dependent on menu(>1.5) which is NOT available for hppa. So the systems
brings back: Sorry, broken packages :-(
So I decided to install only the secnd package.
The system installs gdm and kdm and asks a few questions but it seems that I
have problems with the config. At the moment my
system tells me that the Xserver (xstart) is not configured in the right way. I
tried to configure it with debconf but the server can't be started.
Asks about PCI and so on, but I don't have agp or
pci, well erm, what do I have here? I tried to find out more info on 712/80 but
I couldn't find any usefull info. Unfortunately I threw all my hw manuals into
the trash :-(
My question would be, which packages do I need to
succesfully install and run GNOME (and only Gnome) on my system?
In addition to that, where and how must the
xserver or gnome or whatever be configured to make it run properly?
I'd be very happy for more info about this, also
howtos, etc. Normally I simply don't use gfx because I mainly install servers,
but this time gfx is needed....
Thanks in advance for your help,
Jens
P.S.: when the system boots up I get a message
that my xserver is not properly installed and it points to this logfile which I
cp&pst here:
This is a pre-release version of XFree86, and is not supported in
any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.20-64 parisc64 [ELF] (==) Log file: "/var/log/XFree86.0.log", Time: Sat Mar 27 15:01:48 2004 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "Generic Video Card" (**) |-->Input Device "Generic Keyboard" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "de" (**) XKB: layout: "de" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Configured Mouse" (**) |-->Input Device "Generic Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr /lib/X11/fonts/75dpi/:unscale d,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100d pi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (++) using VT number 7 (WW) Cannot open APM (EE) No OS PCI support available (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] [2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] [2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) All system resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] [2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400 (II) GLINT: driver for 3Dlabs chipsets: gamma, ti_pm2, ti_pm, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta S3VIdentify (II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, 86C325, virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, trio 3d/2x, 86C362, 86C368 (II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326, SIS300, SIS630, SIS540 (II) SAVAGE: driver (version 1.1.16) for S3 Savage chipsets: Savage4, Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX, Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister, TwisterK (II) TRIDENT: driver for Trident chipsets: tvga8900d, cyber9320, cyber9388, cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682, providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1, cyberbladeAi1d, cyberbladeXP, cyberbladeXPm (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300 (II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee, 3dfx Voodoo3, 3dfx Voodoo5 (II) FBDev: driver for framebuffer: fbdev, afb (II) ATI: ATI driver (version 6.3.6) for chipsets: ati (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), ATI Rage 128 Mobility ML (AGP) (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI Radeon VE (AGP) (II) imstt: driver (version 1.0.0 for IMS TwinTurbo chipsets : imstt128, imstt3d (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic (II) v4l driver for Video4Linux S3VProbe begin (II) FBDev(0): using default device (II) Running in FRAMEBUFFER Mode (**) FBDev(0): Depth 24, (--) framebuffer bpp 32 (==) FBDev(0): RGB weight 888 (==) FBDev(0): Default visual is TrueColor (==) FBDev(0): Using gamma correction (1.0, 1.0, 1.0) (II) FBDev(0): Hardware: (vidmem: 2048k) (II) FBDev(0): Checking Modes against framebuffer device... (II) FBDev(0): mode "1280x1024" ok (II) FBDev(0): mode "1024x768" ok (II) FBDev(0): mode "800x600" ok (II) FBDev(0): Checking Modes against monitor... (--) FBDev(0): Virtual size is 1280x1024 (pitch 1280) (**) FBDev(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz (II) FBDev(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (==) FBDev(0): DPI set to (75, 75) (**) FBDev(0): Using "Shadow Framebuffer" (--) Depth 24 pixmap format is 32 bpp Fatal server error: AddScreen/ScreenInit failed for driver 0 |