Problem with HIL mouse & keyboard on a 735 box
Hello,
I compiled the 2.4.22-pa20 kernel to have HIL mouse and keyboard support
on a 735 machine. As you can see from the output of dmesg there seems to
be an error. The keyboard and the mouse are completely frozen.
Do you have any suggestions?
Many thanks,
Pietro
Linux version 2.4.20-pa20 (root@toxhc2) (gcc version 3.0.4) #1 Mon Jan 13 15:16:27 CET 2003
FP[0] enabled: Rev 1 Model 9
The 32-bit Kernel has started...
Determining PDC firmware type: Snake.
model 00002030 00000481 00000000 00000000 77f6cc94 ffffffff 00000004 0000000a 0000000a
vers 0000000b
model 9000/735
Total Memory: 80 Mb
pagetable_init
On node 0 totalpages: 20480
zone(0): 20480 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda4 HOME=/ console=tty0 sti=1 sti_font=VGA8x16 TERM=linux palo_kernel=2/vmlinux
Console: colour dummy device 160x64
Calibrating delay loop... 98.71 BogoMIPS
Memory: 78144k available
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Searching for devices...
Found devices:
1. Coral SGC Graphics (10) at 0xf8000000 [1], versions 0x4, 0x0, 0x77
2. Outfield Core BA (11) at 0xf082f000 [2], versions 0x9, 0x0, 0x70
3. Outfield Core SCSI (10) at 0xf0825000 [2/0/1], versions 0x9, 0x0, 0x71
4. Outfield Core LAN (802.3) (10) at 0xf0826000 [2/0/2], versions 0x9, 0x0, 0x72
5. Outfield Core HIL (10) at 0xf0821000 [2/0/3], versions 0x9, 0x0, 0x73
6. Outfield Core RS-232 (10) at 0xf0823000 [2/0/4], versions 0x9, 0x0, 0x75
7. Outfield Core RS-232 (10) at 0xf0822000 [2/0/5], versions 0x9, 0x0, 0x75
8. Outfield Core Centronics (10) at 0xf0824000 [2/0/6], versions 0x9, 0x0, 0x74
9. Outfield FW SCSI (10) at 0xf0830000 [2/0/7], versions 0x9, 0x0, 0x7c
10. Outfield Audio (10) at 0xf1000000 [2/0/8], versions 0x9, 0x0, 0x7f
11. Hardball (735/99) (0) at 0xfffbe000 [8], versions 0x203, 0x0, 0x4
12. Memory (1) at 0xfffbf000 [9], versions 0x19, 0x0, 0x9
CPU(s): 1 x PA7100 (PCX-T) at 99.000000 MHz
Cutoff version 4 at 0xf082f000 found.
LED (ASP-style) display at f0800020 registered
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Soft power switch support not available.
Starting kswapd
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
STI GSC/PCI graphics driver version 0.9
STI byte mode ROM at f8000000, hpa at f8000000
STI id 26d1482a-40a00499, conforms to spec rev. 8.02
STI device: HPA1659A
Console: switching to colour frame buffer device 160x64
fb0: stifb 1280x1024-8 frame buffer device, id: 26d1482a, mmio: 0xf8100000
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at iomem 0xf0823800 (irq = 90) is a 16550A
ttyS01 at iomem 0xf0822800 (irq = 89) is a 16550A
Generic RTC Driver v1.07
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Found i82596 at 0xf0826000, IRQ 87
82596.c: MAC of HP700 LAN read from EEPROM
eth0: Couldn't get consistent shared memory
eth0: 82596 at 0xf0826000, 08 00 09 49 83 1C IRQ 87.
82596.c $Revision: 1.30 $
SCSI subsystem driver Revision: 1.00
53c700: consistent memory allocation failed
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi0: 53c700 rev 0
scsi0 : LASI SCSI 53c700
Vendor: DEC Model: RZ26L (C) DEC Rev: 440C
Type: Direct-Access ANSI SCSI revision: 02
Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 1036
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 2, lun 0
scsi0: (2:0) Enabling Tag Command Queuing
SCSI device sda: 2050860 512-byte hdwr sectors (1050 MB)
Partition check:
sda: sda1 sda2 sda3 sda4
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
mice: PS/2 mouse device common for all mice
HP SDC: HP SDC at 0xf0821000, IRQ 94 (NMI IRQ 93)
HP SDC: New style SDC
HP SDC: Revision: 1820-4784
HP SDC: TI SN76494 beeper present
HP SDC: OKI MSM-58321 BBRTC present
HP SDC: Spunking the self test register to force PUP on next firmware reset.
HP SDC MLC: Registering the System Domain Controller's HIL MLC.
LVM version 1.0.5+(22/07/2002)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 245k freed
Adding Swap: 78500k swap-space (priority -1)
kernel BUG at slab.c:1128!
HIL KEYB: HIL keyboard found (did = 0xdf, lang = english.us)
input0: HIL keyboard on hil0
HIL PTR: HIL pointer device found (did: 0x68, axis: relative)
HIL PTR: HIL pointer has 3 buttons and 1 sets of 2 axes
input1: HIL mouse on hil0
eth0: link ok.
HP SDC MLC: err code 82
Reply to: