Re: [parisc-linux] Re: Compiling glide-2001.01.26 on hppa

["B. Douglas Hilton" <bdhilton@charter.net>]

Ok, will do. Thanks for the tip!

- Doug


Christopher C. Chimelis wrote:
> Try starting with the source for glide3-alpha.  It is the 64-bit branch of
> the glide sources.  I tweaked them to compile ok on Alpha and they
> shouldn't be hard to fix up for hppa as well.
>
> C
>
> On Sat, 24 Aug 2002, Carlos O'Donell wrote:
>
>
> > > > cc -O6 -m486 -fomit-frame-pointer -funroll-loops \
> > > > -fexpensive-optimizations -ffast-math -DBIG_OPT -I. \
> > > > -I/usr/src/glide-2001.01.26/build-tree/glide2x/swlibs/include \
> > > > -I/usr/src/glide-2001.01.26/build-tree/glide2x/cvg/include \
> > > > -DENDB -DX11 -Wall -fPIC -DPIC -c -o fx64.o fx64.c
> > > >
> > > > cc1: Invalid option `486'
> > > >
> > > >
> > > > My question is, what incantation should I use on hppa to
> > > > replace the '-O6 -m486 -f...' CFLAGS?
> > >
> > > i would suggest just using "-O2" for now....
> > >
> > > randolph
> >
> > The issues revolves around the fact that the source tree and 
> > assembly for some of pieces you want to build are meant for x86 boxes.
> > Though from a cusory glance it looks like the .c files are present for
> > these bits (so you can revert to those).
> >
> > Right off the top:
> > tvg/makefile.linux:CFLAGS = -O -m486 -fomit-frame-pointer $(LCDEFS) $(LCOPTS) $(LCINC)
> > glide2x/sst1/init/initvg/makefile.unix:CFLAGS = -O -m486 -fomit-frame-pointer $(LCDEFS) $(LCOPTS) $(LCINC)
> > glide2x/swlibs/include/make/3dfx.linux.mak:CNODEBUG       = -O6 -m486 -fomit-frame-pointer -funroll-loops \
> > glide2x/swlibs/include/make/3dfx.mak:CNODEBUG       = -O6 -m486 -fomit-frame-pointer -funroll-loops \
> > glide2x/swlibs/include/make/3dfx.mak:CNODEBUG       = -O6 -m486 -fomit-frame-pointer -funroll-loops \
> > glide2x/swlibs/include/make/makefile.autoconf.bottom:GLIDE_DEBUG_GCFLAGS = -O6 -m486
> > glide3x/swlibs/include/make/3dfx.linux.mak:CNODEBUG       = -O6 -m486 -fomit-frame-pointer -funroll-loops \
> > glide3x/swlibs/include/make/3dfx.mak:CNODEBUG       = -O6 -m486 -fomit-frame-pointer -funroll-loops \
> > glide3x/swlibs/include/make/3dfx.mak:CNODEBUG       = -O6 -m486 -fomit-frame-pointer -funroll-loops \
> > glide3x/swlibs/include/make/makefile.autoconf.bottom:GLIDE_DEBUG_GCFLAGS = -O6 -m486
> > swlibs/include/make/3dfx.linux.mak:CNODEBUG       = -O6 -m486 -fomit-frame-pointer -funroll-loops \
> > swlibs/include/make/3dfx.mak:CNODEBUG       = -O6 -m486 -fomit-frame-pointer -funroll-loops \
> > swlibs/include/make/3dfx.mak:CNODEBUG       = -O6 -m486 -fomit-frame-pointer -funroll-loops \
> > swlibs/include/make/makefile.autoconf.bottom:GLIDE_DEBUG_GCFLAGS = -O6 -m486
> >
> > These files will give you some grief and need to be changed; remove the -m486 bit.
> > You either need to produce .dpatch's for the deb to use or stop building
> > the deb and do it by hand with the upstream source.
> >
> > You've got me all excited about seeing this work :) I have a Vodoo1 (Monster3D)
> > PCI card that I might be tempted to ressurect.
> >
> > Hope this helps. Sorry about there not being a _magic_ switch :)
> >
> > c.
> >
> > _______________________________________________
> > parisc-linux mailing list
> > parisc-linux@lists.parisc-linux.org
> > http://lists.parisc-linux.org/mailman/listinfo/parisc-linux