Using Audio card on 735/99
I would like to use my audio card on my 735/99 but have failed so far.
Trying to use aumix to set the volume as I did successfully on a 712/100
running linux I get:
grumpy:~# aumix
aumix: error opening mixer
I have used various kernel versions, the last attempt was with a kernel drawn
from cvs on 3/21/02, Linux version 2.4.18-pa7. dmesg doesn't list the harmony
card as found. The harmony driver was compiled with the kernel.
I am attaching the contents of demeg.
Thank you,
Vlad
Linux version 2.4.18-pa7 (root@grumpy) (gcc version 3.0.3) #2 Thu Mar 21 21:02:24 EST 2002
FP[0] enabled: Rev 1 Model 9
The 32-bit Kernel has started...
Determining PDC firmware type: Snake.
model 00002030 00000481 00000000 00000000 780a7ab1 ffffffff 00000004 0000000a 0000000a
vers 00000013
model 9000/735
Total Memory: 400 Mb
pagetable_init
On node 0 totalpages: 102400
zone(0): 102400 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102
Console: colour dummy device 160x64
Calibrating delay loop... 98.71 BogoMIPS
Memory: 400248k available
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Searching for devices...
Found devices:
1. Outfield Core BA (11) at 0xf082f000 [2], versions 0x9, 0x0, 0x70
2. Outfield Core SCSI (10) at 0xf0825000 [2/0/1], versions 0x9, 0x0, 0x71
3. Outfield Core LAN (802.3) (10) at 0xf0826000 [2/0/2], versions 0x9, 0x0, 0x72
4. Outfield Core HIL (10) at 0xf0821000 [2/0/3], versions 0x9, 0x0, 0x73
5. Outfield Core RS-232 (10) at 0xf0823000 [2/0/4], versions 0x9, 0x0, 0x75
6. Outfield Core RS-232 (10) at 0xf0822000 [2/0/5], versions 0x9, 0x0, 0x75
7. Outfield Core Centronics (10) at 0xf0824000 [2/0/6], versions 0x9, 0x0, 0x74
8. Outfield FW SCSI (10) at 0xf0830000 [2/0/7], versions 0x9, 0x0, 0x7c
9. Outfield Audio (10) at 0xf1000000 [2/0/8], versions 0x9, 0x0, 0x7f
10. Cobra EISA BA (11) at 0xfc000000 [4], versions 0x4, 0x0, 0x76
11. Hardball (735/99) (0) at 0xfffbe000 [8], versions 0x203, 0x0, 0x4
12. Memory (1) at 0xfffbf000 [9], versions 0x19, 0x0, 0x9
CPU(s): 1 x PA7100 (PCX-T) at 99.000000 MHz
Cutoff version 4 at 0xf082f000 found.
LED (ASP-style) display at f0800020 registered
Mongoose EISA Adapter found at 0xfc000000
EISA EEPROM at 0xf0810400
Enumerating EISA bus
EISA slot 1 a configured board was not detected ( expected ___FFFF)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
parport_init_chip: enhanced parport-modes not supported.
parport0: PC-style at 0xf0824800, irq 88 [PCSPP]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at iomem 0xf0823800 (irq = 90) is a 16550A
ttyS01 at iomem 0xf0822800 (irq = 89) is a 16550A
Found HIL at 0xf0821000, IRQ 94
HIL: no keyboard present.
lp0: using parport0 (interrupt-driven).
Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com)
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
Found i82596 at 0xf0826000, IRQ 87
82596.c: MAC of HP700 LAN read from EEPROM
eth0: Couldn't get consistent shared memory
eth0: 82596 at 0xf0826000, 08 00 09 1B 6E 4D IRQ 87.
82596.c $Revision: 1.29 $
SCSI subsystem driver Revision: 1.00
53c700: consistent memory allocation failed
53c700: Version 2.7 By James.Bottomley@HansenPartnership.com
scsi0: 53c700 rev 0
scsi0 : LASI SCSI 53c700
Vendor: WDIGTL Model: ENTERPRISE Rev: 1.91
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST31051N Rev: HP01
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0
scsi0: (1:0) Enabling Tag Command Queuing
SCSI device sda: 8515173 512-byte hdwr sectors (4360 MB)
Partition check:
sda: sda1 sda2 sda3 < sda5 >
scsi0: (6:0) Enabling Tag Command Queuing
SCSI device sdb: 2051460 512-byte hdwr sectors (1050 MB)
sdb: sdb1 sdb2 < sdb5 >
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
NOT FREEING INITMEM (378k)
Adding Swap: 781004k swap-space (priority -1)
eth0: link ok.
Reply to: