Re: Help getting xf86 cfg file for a HP PA 9000/J210XC running debian
Hi again Rogelio,
The problem I mentionned was solved by the last kernel 2.4.17-pa11.
:-)
Joel
Quoting joel.soete@freebel.net:
> Hi Rogelio,
>
> May I suggest the two following one:
>
> ===== XFreeConfig =====
>
> # File generated by xf86config.
>
> #
> # Copyright (c) 1999 by The XFree86 Project, Inc.
> #
> # Permission is hereby granted, free of charge, to any person obtaining
> a
> # copy of this software and associated documentation files (the
> "Software"),
> # to deal in the Software without restriction, including without
> limitation
> # the rights to use, copy, modify, merge, publish, distribute,
> sublicense,
> # and/or sell copies of the Software, and to permit persons to whom the
> # Software is furnished to do so, subject to the following conditions:
> #
> # The above copyright notice and this permission notice shall be
> included in
> # all copies or substantial portions of the Software.
> #
> # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> EXPRESS OR
> # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> MERCHANTABILITY,
> # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
> SHALL
> # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> LIABILITY,
> # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
> OF
> # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> THE
> # SOFTWARE.
> #
> # Except as contained in this notice, the name of the XFree86 Project
> shall
> # not be used in advertising or otherwise to promote the sale, use or
> other
> # dealings in this Software without prior written authorization from
> the
> # XFree86 Project.
> #
>
> #
> **********************************************************************
> # Refer to the XF86Config(4/5) man page for details about the format of
>
> # this file.
> #
> **********************************************************************
>
> #
> **********************************************************************
> # Module section -- this section is used to specify
> # which dynamically loadable modules to load.
> #
> **********************************************************************
> #
> Section "Module"
>
> # This loads the DBE extension module.
>
> Load "dbe" # Double buffer extension
>
> # This loads the miscellaneous extensions module, and disables
> # initialisation of the XFree86-DGA extension within that module.
> SubSection "extmod"
> Option "omit xfree86-dga" # don't initialise the DGA
> extension
> EndSubSection
>
> # This loads the Type1 and FreeType font modules
> Load "type1"
> Load "freetype"
>
> # This loads the GLX module
> # Load "glx"
>
> EndSection
>
> #
> **********************************************************************
> # Files section. This allows default font and rgb paths to be set
> #
> **********************************************************************
>
> Section "Files"
>
> # The location of the RGB database. Note, this is the name of the
> # file minus the extension (like ".txt" or ".db"). There is normally
> # no need to change the default.
>
> RgbPath "/usr/X11R6/lib/X11/rgb"
>
> # Multiple FontPath entries are allowed (which are concatenated
> together),
> # as well as specifying multiple comma-separated entries in one
> FontPath
> # command (or a combination of both methods)
> #
> # If you don't have a floating point coprocessor and emacs, Mosaic or
> other
> # programs take long to start up, try moving the Type1 and Speedo
> directory
> # to the end of this list (or comment them out).
> #
>
> # FontPath "/usr/X11R6/lib/X11/fonts/local/"
> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
>
> # The module search path. The default path is shown here.
>
> # ModulePath "/usr/X11R6/lib/modules"
>
> EndSection
>
> #
> **********************************************************************
> # Server flags section.
> #
> **********************************************************************
>
> Section "ServerFlags"
>
> # Uncomment this to cause a core dump at the spot where a signal is
> # received. This may leave the console in an unusable state, but may
> # provide a better stack trace in the core dump to aid in debugging
>
> # Option "NoTrapSignals"
>
> # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
> # This allows clients to receive this key event.
>
> # Option "DontZap"
>
> # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
> # sequences. This allows clients to receive these key events.
>
> # Option "Dont Zoom"
>
> # Uncomment this to disable tuning with the xvidtune client. With
> # it the client can still run and fetch card and monitor attributes,
> # but it will not be allowed to change them. If it tries it will
> # receive a protocol error.
>
> # Option "DisableVidModeExtension"
>
> # Uncomment this to enable the use of a non-local xvidtune client.
>
> # Option "AllowNonLocalXvidtune"
>
> # Uncomment this to disable dynamically modifying the input device
> # (mouse and keyboard) settings.
>
> # Option "DisableModInDev"
>
> # Uncomment this to enable the use of a non-local client to
> # change the keyboard or mouse settings (currently only xset).
>
> # Option "AllowNonLocalModInDev"
>
> EndSection
>
> #
> **********************************************************************
> # Input devices
> #
> **********************************************************************
>
> #
> **********************************************************************
> # Core keyboard's InputDevice section
> #
> **********************************************************************
>
> Section "InputDevice"
>
> Identifier "Keyboard1"
> Driver "Keyboard"
> # For most OSs the protocol can be omitted (it defaults to "Standard").
> # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
> # uncomment the following line.
>
> # Option "Protocol" "Xqueue"
>
> Option "AutoRepeat" "500 30"
>
> # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
> # Option "Xleds" "1 2 3"
>
> # Option "LeftAlt" "Meta"
> # Option "RightAlt" "ModeShift"
>
> # To customise the XKB settings to suit your keyboard, modify the
> # lines below (which are the defaults). For example, for a non-U.S.
> # keyboard, you will probably want to use:
> # Option "XkbModel" "pc102"
> # If you have a US Microsoft Natural keyboard, you can use:
> # Option "XkbModel" "microsoft"
> #
> # Then to change the language, change the Layout setting.
> # For example, a german layout can be obtained with:
> # Option "XkbLayout" "de"
> # or:
> # Option "XkbLayout" "de"
> # Option "XkbVariant" "nodeadkeys"
> #
> # If you'd like to switch the positions of your capslock and
> # control keys, use:
> # Option "XkbOptions" "ctrl:swapcaps"
>
> # These are the default XKB settings for XFree86
> # Option "XkbRules" "xfree86"
> # Option "XkbModel" "pc101"
> # Option "XkbLayout" "us"
> # Option "XkbVariant" ""
> # Option "XkbOptions" ""
>
> # Option "XkbDisable"
>
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc101"
> Option "XkbLayout" "us"
> # Option "XkbVariant" "nodeadkeys"
>
> EndSection
>
>
> #
> **********************************************************************
> # Core Pointer's InputDevice section
> #
> **********************************************************************
>
> Section "InputDevice"
>
> # Identifier and driver
>
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "PS/2"
> # Option "Device" "/dev/mouse"
> Option "Device" "/dev/psaux"
>
> # When using XQUEUE, comment out the above two lines, and uncomment
> # the following line.
>
> # Option "Protocol" "Xqueue"
>
> # Baudrate and SampleRate are only for some Logitech mice. In
> # almost every case these lines should be omitted.
>
> # Option "BaudRate" "9600"
> # Option "SampleRate" "150"
>
> # Emulate3Buttons is an option for 2-button Microsoft mice
> # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>
> # Option "Emulate3Buttons"
> # Option "Emulate3Timeout" "100"
>
> # ChordMiddle is an option for some 3-button Logitech mice
>
> # Option "ChordMiddle"
>
> EndSection
>
>
> #
> **********************************************************************
> # Other input device sections
> # this is optional and is required only if you
> # are using extended input devices. This is for example only. Refer
> # to the XF86Config man page for a description of the options.
> #
> **********************************************************************
> #
> # Section "InputDevice"
> # Identifier "Mouse2"
> # Driver "mouse"
> # Option "Protocol" "MouseMan"
> # Option "Device" "/dev/mouse2"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "spaceball"
> # Driver "magellan"
> # Option "Device" "/dev/cua0"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "spaceball2"
> # Driver "spaceorb"
> # Option "Device" "/dev/cua0"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "touchscreen0"
> # Driver "microtouch"
> # Option "Device" "/dev/ttyS0"
> # Option "MinX" "1412"
> # Option "MaxX" "15184"
> # Option "MinY" "15372"
> # Option "MaxY" "1230"
> # Option "ScreenNumber" "0"
> # Option "ReportingMode" "Scaled"
> # Option "ButtonNumber" "1"
> # Option "SendCoreEvents"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "touchscreen1"
> # Driver "elo2300"
> # Option "Device" "/dev/ttyS0"
> # Option "MinX" "231"
> # Option "MaxX" "3868"
> # Option "MinY" "3858"
> # Option "MaxY" "272"
> # Option "ScreenNumber" "0"
> # Option "ReportingMode" "Scaled"
> # Option "ButtonThreshold" "17"
> # Option "ButtonNumber" "1"
> # Option "SendCoreEvents"
> # EndSection
>
> #
> **********************************************************************
> # Monitor section
> #
> **********************************************************************
>
> # Any number of monitor sections may be present
>
> Section "Monitor"
>
> Identifier "lcd"
>
> # HorizSync is in kHz unless units are specified.
> # HorizSync may be a comma separated list of discrete values, or a
> # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
> # USER MANUAL FOR THE CORRECT NUMBERS.
>
> HorizSync 31.5 - 48.5
>
> # HorizSync 30-64 # multisync
> # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
> # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
>
> # VertRefresh is in Hz unless units are specified.
> # VertRefresh may be a comma separated list of discrete values, or a
> # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
> # USER MANUAL FOR THE CORRECT NUMBERS.
>
> VertRefresh 50-100
>
> EndSection
>
>
> #
> **********************************************************************
> # Graphics device section
> #
> **********************************************************************
>
> # Any number of graphics device sections may be present
>
> # Standard VGA Device:
>
> Section "Device"
> Identifier "Standard VGA"
> VendorName "Unknown"
> BoardName "Unknown"
>
> # The chipset line is optional in most cases. It can be used to
> override
> # the driver's chipset detection, and should not normally be specified.
>
> # Chipset "generic"
>
> # The Driver line must be present. When using run-time loadable driver
> # modules, this line instructs the server to load the specified driver
> # module. Even when not using loadable driver modules, this line
> # indicates which driver should interpret the information in this
> section.
>
> Driver "fbdev"
> # The BusID line is used to specify which of possibly multiple devices
> # this section is intended for. When this line isn't present, a device
> # section can only match up with the primary video device. For PCI
> # devices a line like the following could be used. This line should
> not
> # normally be included unless there is more than one video device
> # intalled.
>
> # BusID "PCI:0:10:0"
>
> # VideoRam 256
>
> # Clocks 25.2 28.3
>
> EndSection
>
> # Device configured by xf86config:
>
> Section "Device"
> Identifier "fbdev"
> Driver "fbdev"
> #VideoRam 8192
> # Insert Clocks lines here if appropriate
> EndSection
>
>
> #
> **********************************************************************
> # Screen sections
> #
> **********************************************************************
>
> # Any number of screen sections may be present. Each describes
> # the configuration of a single screen. A single specific screen
> section
> # may be specified from the X server command line with the "-screen"
> # option.
> Section "Screen"
> Identifier "Screen 1"
> Device "fbdev"
> Monitor "lcd"
> DefaultDepth 8
>
> Subsection "Display"
> Depth 8
> Modes "1280x1024" #"800x600" "640x480" "1024x768"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "640x480" "800x600" "1024x768" "1280x1024"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 24
> Modes "800x600" # "1024x768"
> ViewPort 0 0
> EndSubsection
> EndSection
>
> #
> **********************************************************************
> # ServerLayout sections.
> #
> **********************************************************************
>
> # Any number of ServerLayout sections may be present. Each describes
> # the way multiple screens are organised. A specific ServerLayout
> # section may be specified from the X server command line with the
> # "-layout" option. In the absence of this, the first section is used.
> # When now ServerLayout section is present, the first Screen section
> # is used alone.
>
> Section "ServerLayout"
>
> # The Identifier line must be present
> Identifier "Simple Layout"
>
> # Each Screen line specifies a Screen section name, and optionally
> # the relative position of other screens. The four names after
> # primary screen name are the screens to the top, bottom, left and
> right
> # of the primary screen. In this example, screen 2 is located to the
> # right of screen 1.
>
> Screen "Screen 1"
>
> # Each InputDevice line specifies an InputDevice section name and
> # optionally some options to specify the way the device is to be
> # used. Those options include "CorePointer", "CoreKeyboard" and
> # "SendCoreEvents".
>
> InputDevice "Mouse1" "CorePointer"
> InputDevice "Keyboard1" "CoreKeyboard"
>
> EndSection
>
>
> ===== End XFreeConfig =====
> ===== XFreeConfig-4 =====
> ### BEGIN DEBCONF SECTION
> # XF86Config-4 (XFree86 server configuration file) generated by dexconf,
> the
> # Debian X Configuration tool, using values from the debconf database.
> #
> # Edit this file with caution, and see the XF86Config-4 manual page.
> # (Type "man XF86Config-4" at the shell prompt.)
> #
> # If you want your changes to this file preserved by dexconf, only make
> changes
> # before the "### BEGIN DEBCONF SECTION" line above, and/or after the
> # "### END DEBCONF SECTION" line below.
>
> Section "Files"
> FontPath "unix/:7100"
# local font server
> # if the local font server has problems, we can fall back on these
> FontPath "/usr/lib/X11/fonts/misc"
> FontPath "/usr/lib/X11/fonts/cyrillic"
> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/lib/X11/fonts/Speedo"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
>
> Section "Module"
> Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "pex5"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> Load "xie"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver
"keyboard"
> Option
"CoreKeyboard"
> Option
"XkbRules" "xfree86"
> Option
"XkbModel" "pc104"
> Option
"XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver
"mouse"
> Option
"CorePointer"
> Option
"Device" "/dev/psaux"
> Option
"Protocol" "PS/2"
> Option
"Emulate3Buttons" "true"
> Option
"ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Mouse"
> Driver
"mouse"
> Option
"SendCoreEvents" "true"
> Option
"Device" "/dev/input/mice"
> Option
"Protocol" "ImPS/2"
> Option
"Emulate3Buttons" "true"
> Option
"ZAxisMapping" "4 5"
> EndSection
>
> Section "Device"
> Identifier "Generic Video Card"
> Driver
"fbdev"
> Option
"UseFBDev" "true"
> EndSection
>
> Section "Monitor"
> Identifier "Generic Monitor"
> #
> HorizSync
> 30-100
> HorizSync 31.5, 48.5
> VertRefresh 50-160
> Option
"DPMS"
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device
"Generic Video Card"
> Monitor
"Generic Monitor"
> DefaultDepth 8
> SubSection "Display"
> Depth
1
> Modes
"1280x1024"
> EndSubSection
> SubSection "Display"
> Depth
4
> Modes
"1280x1024"
> EndSubSection
> SubSection "Display"
> Depth
8
> Modes
"1280x1024"
> EndSubSection
> SubSection "Display"
> Depth
15
> Modes
"1280x1024"
> EndSubSection
> SubSection "Display"
> Depth
16
> Modes
"1280x1024"
> EndSubSection
> SubSection "Display"
> Depth
24
> Modes
"1280x1024"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen
"Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Generic Mouse"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
> ### END DEBCONF SECTION
>
>
> ===== End XFreeConfig-4 =====
>
> That works for my B180 and 712.
>
> Hope it will help and good luck,
> joel
>
>
> -------------------------------------------------
> This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
>
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
Reply to: