haskell-hdf5 build failed on armel, i386 ,s390x and riscv64 due to test fail
Hi,
The package now has failed to build on armel, i386, s390x and irscv64
arch due to test case failed:
```
(sid-riscv64-sbuild)root@unmatched:/home/vimer/build/08/52_haskell-hdf5/haskell-hdf5-1.8.10#
debian/hlibrary.setup test --builddir=dist-ghc --show-details=direct
Running 1 test suites...
Test suite hdf5-test: RUNNING...
hdf5-test: unknown RTS option: -N
hdf5-test:
hdf5-test: Usage: <prog> <args> [+RTS <rtsopts> | -RTS <args>] ... --RTS <args>
hdf5-test:
hdf5-test: +RTS Indicates run time system options follow
hdf5-test: -RTS Indicates program arguments follow
hdf5-test: --RTS Indicates that ALL subsequent arguments will be
given to the
hdf5-test: program (including any of these RTS flags)
hdf5-test:
hdf5-test: The following run time system options are available:
hdf5-test:
hdf5-test: -? Prints this message and exits; the program is not executed
hdf5-test: --info Print information about the RTS used by this program
hdf5-test:
hdf5-test: --nonmoving-gc
hdf5-test: Selects the non-moving mark-and-sweep garbage
collector to
hdf5-test: manage the oldest generation.
hdf5-test: --copying-gc
hdf5-test: Selects the copying garbage collector to manage
all generations.
hdf5-test:
hdf5-test: -K<size> Sets the maximum stack size (default: 80% of the heap)
hdf5-test: Egs: -K32k -K512k -K8M
hdf5-test: -ki<size> Sets the initial thread stack size (default 1k)
Egs: -ki4k -ki2m
hdf5-test: -kc<size> Sets the stack chunk size (default 32k)
hdf5-test: -kb<size> Sets the stack chunk buffer size (default 1k)
hdf5-test:
hdf5-test: -A<size> Sets the minimum allocation area size (default
1m) Egs: -A20m -A10k
hdf5-test: -AL<size> Sets the amount of large-object memory that can
be allocated
hdf5-test: before a GC is triggered (default: the value of -A)
hdf5-test: -F<n> Sets the collecting threshold for old
generations as a factor of
hdf5-test: the live data in that generation the last time
it was collected
hdf5-test: (default: 2.0)
hdf5-test: -n<size> Allocation area chunk size (0 = disabled, default: 0)
hdf5-test: -O<size> Sets the minimum size of the old generation (default 1M)
hdf5-test: -M<size> Sets the maximum heap size (default unlimited)
Egs: -M256k -M1G
hdf5-test: -H<size> Sets the minimum heap size (default 0M) Egs:
-H24m -H1G
hdf5-test: -xb<addr> Sets the address from which a suitable start
for the heap memory
hdf5-test: will be searched from. This is useful if the
default address
hdf5-test: clashes with some third-party library.
hdf5-test: -xn Use the non-moving collector for the old generation.
hdf5-test: -m<n> Minimum % of heap which must be available (default 3%)
hdf5-test: -G<n> Number of generations (default: 2)
hdf5-test: -c<n> Use in-place compaction instead of copying in
the oldest generation
hdf5-test: when live data is at least <n>% of the maximum
heap size set with
hdf5-test: -M (default: 30%)
hdf5-test: -c Use in-place compaction for all oldest
generation collections
hdf5-test: (the default is to use copying)
hdf5-test: -w Use mark-region for the oldest generation (experimental)
hdf5-test: -I<sec> Perform full GC after <sec> idle time (default:
0.3, 0 == off)
hdf5-test:
hdf5-test: -T Collect GC statistics (useful for in-program
statistics access)
hdf5-test: -t[<file>] One-line GC statistics (if <file> omitted, uses stderr)
hdf5-test: -s[<file>] Summary GC statistics (if <file> omitted, uses stderr)
hdf5-test: -S[<file>] Detailed GC statistics (if <file> omitted, uses stderr)
hdf5-test:
hdf5-test:
hdf5-test: -Z Don't squeeze out update frames on context switch
hdf5-test: -B Sound the bell at the start of each garbage collection
hdf5-test: -h Heap residency profile (output file <program>.hp)
hdf5-test: -hT Produce a heap profile grouped by closure type
hdf5-test: -i<sec> Time between heap profile samples (seconds, default: 0.1)
hdf5-test:
hdf5-test: -C<secs> Context-switch interval in seconds.
hdf5-test: 0 or no argument means switch as often as possible.
hdf5-test: Default: 0.02 sec.
hdf5-test: -V<secs> Master tick interval in seconds (0 == disable timer).
hdf5-test: This sets the resolution for -C and the heap
profile timer -i,
hdf5-test: and is the frequency of time profile samples.
hdf5-test: Default: 0.01 sec.
hdf5-test:
hdf5-test: --install-signal-handlers=<yes|no>
hdf5-test: Install signal handlers (default: yes)
hdf5-test: --io-manager=<native|posix>
hdf5-test: The I/O manager subsystem to use. (default: posix)
hdf5-test: -e<n> Maximum number of outstanding local sparks
(default: 4096)
hdf5-test: -xq The allocation limit given to a thread after it receives
hdf5-test: an AllocationLimitExceeded exception. (default: 100k)
hdf5-test:
hdf5-test: -Mgrace=<n>
hdf5-test: The amount of allocation after the program receives a
hdf5-test: HeapOverflow exception before the exception is
thrown again, if
hdf5-test: the program is still exceeding the heap limit.
hdf5-test:
hdf5-test: RTS options may also be specified using the GHCRTS
environment variable.
hdf5-test:
hdf5-test: Other RTS options may be available for programs compiled a
different way.
hdf5-test: The GHC User's Guide has full details.
hdf5-test:
Test suite hdf5-test: FAIL
Test suite logged to: dist-ghc/test/hdf5-1.8.10-hdf5-test.log
0 of 1 test suites (0 of 1 test cases) passed.
```
Here:
https://buildd.debian.org/status/package.php?p=haskell-hdf5
in fact, the dist-ghc/test/hdf5-1.8.10-hdf5-test.log file is empyt:
```
(sid-riscv64-sbuild)root@unmatched:/home/vimer/build/08/52_haskell-hdf5/haskell-hdf5-1.8.10#
cat dist-ghc/test/hdf5-1.8.10-hdf5-test.log
Test suite hdf5-test: RUNNING...
Test suite hdf5-test: FAIL
Test suite logged to: dist-ghc/test/hdf5-1.8.10-hdf5-test.log
```
Any help will be appreicated.
(PS: I want to open reportbug with patch:) )
BR,
Bo
Reply to: