aprsd
Hi needs some help with aprsd installed it ok but when I try to run it
this is the result, I'm new to linux aaand to aprs so not sure what it
means.
geoff@geoff-desktop:~$ aprsd
# aprsd 2.2.5-13 Oct 2002 aprsd group
Read 0 items from /var/log/aprsd/history.txt
Reading /etc/aprsd/aprsd.conf
servercall aprsdATL
MyCall VK2SH
MyLocation Lake Macquarie.NSW
MyEmail geoffwri@idx.com.au
MaxUsers 150
MaxLoad 100000000000
NetBeacon 1 !3254.43SI15137.70E& APRS Server
ackrepeats 2
ackrepeattime 5
expire 35
aprspath APRS v WIDE
rf-allow no
filterNoGate yes
history-allow no
Trace no
logAllRF no
aprsPass yes
TncPktSpacing 1500
igateMyCall no
ConvertMicE no
pass 24570
Server first.aprs.net.au 14579 server-sr
rawtncport 14580
localport 14579
mainport 10151
mainport-nh 10152
linkport 1313
msgport 1314
udpport 1315
sysopPort 14500
httpport 14501
ipwatchport 14502
errorport 14503
omniport 14600
gate2rf K4HG* N4NEQ* KA7PBI* WE7U*
msgdest2rf SCOUTS KIDS CQGA
NetBeacon is: aprsdATL>APD225,TCPIP*:!
3254.43SI15137.70E& APRS Server
APRS packet path = APRS v WIDE
TNC com port not defined.
Internet to RF data flow is DISABLED
TCPServerThread bind error: Address already in use
TCPServerThread bind error: Address already in use
TCPServerThread bind error: Address already in use
TCPServerThread bind error: Address already in use
TCPServerThread bind error: Address already in use
TCPServerThread bind error: Address already in use
TCPServerThread bind error: Address already in use
TCPServerThread bind error: Address already in use
Datagram socket bind error: Address already in use
TCPServerThread bind error: Address already in use
TCPServerThread bind error: Address already in use
TCPServerThread bind error: Address already in use
nIGATES=1
igate0=first.aprs.net.au
Connecting to IGATEs and Hubs now...
Server Started
NetBeacon every 1 minutes : aprsdATL>APD225,TCPIP*:!
3254.43SI15137.70E& APRS Server
MYCALL set to: VK2SH
IGATE Login: first.aprs.net.au VK2SH 24570
Connected to first.aprs.net.au 14579
Disconnected first.aprs.net.au 14579
** No data from TNC during previous 2 minutes **
#
Server Up Time = 1 minute 61
Total TNC packets = 0
UDP stream rate = 0 bits/sec
Msg stream rate = 0 bits/sec
TNC stream rate = 0 bits/sec
User stream rate = 0 bits/sec
Hub stream rate = 0 bits/sec
Full stream rate = 0 bits/sec
Msgs gated to RF = 0
Connect count = 0
Users = 2
Peak Users = 0
Server load = 0 bits/sec
History Items = 0
aprsString Objs = 4
Items in InetQ = 4
InetQ overflows = 0
TncQ overflows = 0
conQ overflows = 0
charQ overflow = 0
Hist. dump aborts = 0
** No data from TNC during previous 2 minutes **
#
Server Up Time = 2 minutes 122
Total TNC packets = 0
UDP stream rate = 0 bits/sec
Msg stream rate = 0 bits/sec
TNC stream rate = 0 bits/sec
User stream rate = 0 bits/sec
Hub stream rate = 0 bits/sec
Full stream rate = 0 bits/sec
Msgs gated to RF = 0
Connect count = 0
Users = 2
Peak Users = 0
Server load = 0 bits/sec
History Items = 0
aprsString Objs = 6
Items in InetQ = 6
InetQ overflows = 0
TncQ overflows = 0
conQ overflows = 0
charQ overflow = 0
Hist. dump aborts = 0
** No data from TNC during previous 2 minutes **
#
Any help apreciated.
Geoff VK2SH
Reply to:
- Follow-Ups:
- Re: aprsd
- From: Damien Gardner Jnr <rendrag@rendrag.net>