Bug#551158: marked as done (Libc6: exim4 Segfault in libc-2.7.so)

To: Aurelien Jarno <aurelien@aurel32.net>
Subject: Bug#551158: marked as done (Libc6: exim4 Segfault in libc-2.7.so)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Thu, 23 Jun 2011 10:36:15 +0000
Message-id: <[🔎] handler.551158.D551158.130882531629083.ackdone@bugs.debian.org>
References: <20110623103504.GA9660@volta.aurel32.net> <4AD738C0.1000304@tpg.com.au>

Your message dated Thu, 23 Jun 2011 12:35:04 +0200
with message-id <20110623103504.GA9660@volta.aurel32.net>
and subject line Re: Libc6: exim4 Segfault in libc-2.7.so
has caused the Debian Bug report #551158,
regarding Libc6: exim4 Segfault in libc-2.7.so
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
551158: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=551158
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: submit@bugs.debian.org
Subject: Libc6: exim4 Segfault in libc-2.7.so
From: Glynn <gwpd@tpg.com.au>
Date: Fri, 16 Oct 2009 00:59:12 +1000
Message-id: <4AD738C0.1000304@tpg.com.au>

Package: libc6
Version: 2.7-18
Severity: critical
Justification: breaks the whole system

The system will not boot into multi user mode.
It will boot to single user and then to root. It crashes otherwise.
The following message is the first error in syslog
kernel: [   17.145279] exim4[2730]: segfault at 81
f3f60 ip b7c53e18 sp bf9a4a3c error 4 in libc-2.7.so[b7bde000+155000]

dmesg has the following error
[    0.164229] ACPI Error (dsobject-0501): Package List length (6) larger than NumElements count (2), truncated

The system will not boot with noacpi option either.

I've attached syslog and dmesg. The system is a Gigabyte GA-K8N51PVMT-9 motherboard
with 2G byte memory and 3 disk drives.

Hope this helps.



Guys

Attached is a copy of a reportbug email which I couldn't send fromthe system. Hope you can find the problem. I think it is also the sameone which stops ubuntu and mint booting on my machine.


Regards

Glynn

Content-Type: multipart/mixed; boundary="===============2145214822=="
MIME-Version: 1.0
From: glynn <gwpd@tpg.com.au>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: libc6: Segfault in exim4 during boot
Message-ID: <20091016033755.2691.32406.reportbug@glynn-desktop>
X-Mailer: reportbug 3.48
Date: Thu, 15 Oct 2009 23:37:55 -0400

This is a multi-part MIME message sent by reportbug.


--===============2145214822==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Package: libc6
Version: 2.7-18
Severity: critical
Justification: breaks the whole system

The system will not boot into multi user mode.
It will boot to single user and then to root. It crashes otherwise.
The following message is the first error in syslog
kernel: [   17.145279] exim4[2730]: segfault at 81
f3f60 ip b7c53e18 sp bf9a4a3c error 4 in libc-2.7.so[b7bde000+155000]

dmesg has the following error
[    0.164229] ACPI Error (dsobject-0501): Package List length (6) larger than NumElements count (2), truncated

The system will not boot with noacpi option either.

I've attached syslog and dmesg. The system is a Gigabyte GA-K8N51PVMT-9 motherboard
with 2G byte memory and 3 disk drives.

Hope this helps.

Glynn
-- System Information:
Debian Release: 5.0.3
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages libc6 depends on:
ii  libgcc1                      1:4.3.2-1.1 GCC support library

libc6 recommends no packages.

Versions of packages libc6 suggests:
pn  glibc-doc                     <none>     (no description available)
ii  libc6-i686                    2.7-18     GNU C Library: Shared libraries [i
ii  locales                       2.7-18     GNU C Library: National Language (

-- debconf information:
  glibc/upgrade: true
  glibc/restart-failed:
  glibc/restart-services:

--===============2145214822==
Content-Type: text/x-c++; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="syslog"

Oct 15 01:13:50 glynn-desktop kernel: imklog 3.18.6, log source = /proc/kmsg started.
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Initializing cgroup subsys cpuset
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Initializing cgroup subsys cpu
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Mar 13 18:08:45 UTC 2009
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] BIOS-provided physical RAM map:
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]  BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] 1151MB HIGHMEM available.
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] 896MB LOWMEM available.
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] found SMP MP-table at [c00f5240] 000f5240
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Zone PFN ranges:
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   DMA             0 ->     4096
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   Normal       4096 ->   229376
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   HighMem    229376 ->   524272
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Movable zone start PFN for each node
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] early_node_map[1] active PFN ranges
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]     0:        0 ->   524272
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] On node 0 totalpages: 524272
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   DMA zone: 0 pages reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   Normal zone: 1760 pages used for memmap
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   HighMem zone: 2304 pages used for memmap
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   HighMem zone: 292592 pages, LIFO batch:31
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000]   Movable zone: 0 pages used for memmap
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] DMI 2.3 present.
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: RSDP 000F6BF0, 0014 (r0 GBT   )
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: RSDT 7FFF3000, 0030 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: FACP 7FFF3040, 0074 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: DSDT 7FFF30C0, 4D95 (r1 GBT    AWRDACPI     1000 MSFT  100000C)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: FACS 7FFF0000, 0040
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: MCFG 7FFF7F00, 003C (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: APIC 7FFF7E80, 0072 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Nvidia board detected. Ignoring ACPI timer override.
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] If you got timer trouble try acpi_use_timer_override
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1008
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: IRQ9 used by override.
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: IRQ14 used by override.
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] ACPI: IRQ15 used by override.
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] NR_CPUS: 8, nr_cpu_ids: 2
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520176
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Kernel command line: root=/dev/hdc6 ro quiet
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] mapped APIC to ffffb000 (fee00000)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Enabling fast FPU save and restore... done.
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Initializing CPU#0
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Oct 15 01:13:50 glynn-desktop kernel: [    0.000000] Detected 2210.066 MHz processor.
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000] spurious 8259A interrupt: IRQ7.
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000] Console: colour VGA+ 80x25
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000] console [tty0] enabled
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000] Memory: 2069176k/2097088k available (1769k kernel code, 26588k reserved, 752k data, 244k init, 1179584k highmem)
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000] virtual kernel memory layout:
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000]       .data : 0xc02ba4d3 - 0xc0376620   ( 752 kB)
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000]       .text : 0xc0100000 - 0xc02ba4d3   (1769 kB)
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Oct 15 01:13:50 glynn-desktop kernel: [    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Oct 15 01:13:50 glynn-desktop kernel: [    0.084069] Calibrating delay using timer specific routine.. 4424.45 BogoMIPS (lpj=8848904)
Oct 15 01:13:50 glynn-desktop kernel: [    0.084102] Security Framework initialized
Oct 15 01:13:50 glynn-desktop kernel: [    0.084108] SELinux:  Disabled at boot.
Oct 15 01:13:50 glynn-desktop kernel: [    0.084111] Capability LSM initialized
Oct 15 01:13:50 glynn-desktop kernel: [    0.084125] Mount-cache hash table entries: 512
Oct 15 01:13:50 glynn-desktop kernel: [    0.084250] Initializing cgroup subsys ns
Oct 15 01:13:50 glynn-desktop kernel: [    0.084254] Initializing cgroup subsys cpuacct
Oct 15 01:13:50 glynn-desktop kernel: [    0.084256] Initializing cgroup subsys devices
Oct 15 01:13:50 glynn-desktop kernel: [    0.084273] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 15 01:13:50 glynn-desktop kernel: [    0.084276] CPU: L2 Cache: 512K (64 bytes/line)
Oct 15 01:13:50 glynn-desktop kernel: [    0.084279] Intel machine check architecture supported.
Oct 15 01:13:50 glynn-desktop kernel: [    0.084281] Intel machine check reporting enabled on CPU#0.
Oct 15 01:13:50 glynn-desktop kernel: [    0.084292] Checking 'hlt' instruction... OK.
Oct 15 01:13:50 glynn-desktop kernel: [    0.100252] SMP alternatives: switching to UP code
Oct 15 01:13:50 glynn-desktop kernel: [    0.105727] ACPI: Core revision 20080321
Oct 15 01:13:50 glynn-desktop kernel: [    0.113648] ENABLING IO-APIC IRQs
Oct 15 01:13:50 glynn-desktop kernel: [    0.113855] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Oct 15 01:13:50 glynn-desktop kernel: [    0.157548] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] Brought up 1 CPUs
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] Total of 1 processors activated (4424.45 BogoMIPS).
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] CPU0 attaching sched-domain:
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010]  domain 0: span 0
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010]   groups: 0
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] net_namespace: 660 bytes
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] Booting paravirtualized kernel on bare hardware
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] NET: Registered protocol family 16
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] ACPI: bus type pci registered
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] PCI: MCFG area at f0000000 reserved in E820
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] PCI: Using MMCONFIG for extended config space
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] PCI: Using configuration type 1 for base access
Oct 15 01:13:50 glynn-desktop kernel: [    0.160010] Setting up standard PCI resources
Oct 15 01:13:50 glynn-desktop kernel: [    0.160596] ACPI: EC: Look up EC in DSDT
Oct 15 01:13:50 glynn-desktop kernel: [    0.164010] ACPI Error (dsobject-0501): Package List length (6) larger than NumElements count (2), truncated
Oct 15 01:13:50 glynn-desktop kernel: [    0.164010]  [20080321]
Oct 15 01:13:50 glynn-desktop kernel: [    0.167076] ACPI: Interpreter enabled
Oct 15 01:13:50 glynn-desktop kernel: [    0.167078] ACPI: (supports S0 S1 S4 S5)
Oct 15 01:13:50 glynn-desktop kernel: [    0.167090] ACPI: Using IOAPIC for interrupt routing
Oct 15 01:13:50 glynn-desktop kernel: [    0.175403] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 15 01:13:50 glynn-desktop kernel: [    0.176498] PCI: Transparent bridge - 0000:00:10.0
Oct 15 01:13:50 glynn-desktop kernel: [    0.176515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 15 01:13:50 glynn-desktop kernel: [    0.176811] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Oct 15 01:13:50 glynn-desktop kernel: [    0.260267] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.260425] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.260582] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
Oct 15 01:13:50 glynn-desktop kernel: [    0.260737] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.260893] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
Oct 15 01:13:50 glynn-desktop kernel: [    0.261048] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.261204] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.261359] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.261516] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
Oct 15 01:13:50 glynn-desktop kernel: [    0.261671] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.261828] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
Oct 15 01:13:50 glynn-desktop kernel: [    0.261985] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.262142] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
Oct 15 01:13:50 glynn-desktop kernel: [    0.262297] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.262454] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.262611] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
Oct 15 01:13:50 glynn-desktop kernel: [    0.262770] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
Oct 15 01:13:50 glynn-desktop kernel: [    0.262926] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.263085] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
Oct 15 01:13:50 glynn-desktop kernel: [    0.263245] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
Oct 15 01:13:50 glynn-desktop kernel: [    0.263439] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.263624] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.263808] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
Oct 15 01:13:50 glynn-desktop kernel: [    0.263993] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.264184] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
Oct 15 01:13:50 glynn-desktop kernel: [    0.264370] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.264557] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.264743] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.264929] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
Oct 15 01:13:50 glynn-desktop kernel: [    0.265116] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.265303] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
Oct 15 01:13:50 glynn-desktop kernel: [    0.265490] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.265677] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.265865] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
Oct 15 01:13:50 glynn-desktop kernel: [    0.266052] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.266239] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
Oct 15 01:13:50 glynn-desktop kernel: [    0.266426] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
Oct 15 01:13:50 glynn-desktop kernel: [    0.266614] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.266801] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.266988] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
Oct 15 01:13:50 glynn-desktop kernel: [    0.267174] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
Oct 15 01:13:50 glynn-desktop kernel: [    0.267308] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 15 01:13:50 glynn-desktop kernel: [    0.267332] pnp: PnP ACPI init
Oct 15 01:13:50 glynn-desktop kernel: [    0.267338] ACPI: bus type pnp registered
Oct 15 01:13:50 glynn-desktop kernel: [    0.272082] pnp: PnP ACPI: found 13 devices
Oct 15 01:13:50 glynn-desktop kernel: [    0.272084] ACPI: ACPI bus type pnp unregistered
Oct 15 01:13:50 glynn-desktop kernel: [    0.272088] PnPBIOS: Disabled by ACPI PNP
Oct 15 01:13:50 glynn-desktop kernel: [    0.272265] PCI: Using ACPI for IRQ routing
Oct 15 01:13:50 glynn-desktop kernel: [    0.272455] ACPI: RTC can wake from S4
Oct 15 01:13:50 glynn-desktop kernel: [    0.272475] system 00:01: ioport range 0x1000-0x107f has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272478] system 00:01: ioport range 0x1080-0x10ff has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272480] system 00:01: ioport range 0x1400-0x147f has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272484] system 00:01: ioport range 0x1480-0x14ff has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272487] system 00:01: ioport range 0x1800-0x187f has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272490] system 00:01: ioport range 0x1880-0x18ff has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272492] system 00:01: ioport range 0x2000-0x207f has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272495] system 00:01: ioport range 0x2080-0x20ff has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272499] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272502] system 00:01: iomem range 0xf0000000-0xf1ffffff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272507] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272510] system 00:02: ioport range 0x290-0x29f has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272519] system 00:0c: iomem range 0xcf800-0xcffff has been reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272522] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272525] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272527] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272530] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272533] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272536] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272539] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272541] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.272544] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
Oct 15 01:13:50 glynn-desktop kernel: [    0.302843] PCI: Bridge: 0000:00:02.0
Oct 15 01:13:50 glynn-desktop kernel: [    0.302846]   IO window: 7000-7fff
Oct 15 01:13:50 glynn-desktop kernel: [    0.302848]   MEM window: disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.302850]   PREFETCH window: disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.302853] PCI: Bridge: 0000:00:03.0
Oct 15 01:13:50 glynn-desktop kernel: [    0.302855]   IO window: 8000-8fff
Oct 15 01:13:50 glynn-desktop kernel: [    0.302857]   MEM window: disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.302859]   PREFETCH window: disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.302863] PCI: Bridge: 0000:00:04.0
Oct 15 01:13:50 glynn-desktop kernel: [    0.302865]   IO window: a000-afff
Oct 15 01:13:50 glynn-desktop kernel: [    0.302867]   MEM window: 0xf2000000-0xf3ffffff
Oct 15 01:13:50 glynn-desktop kernel: [    0.302870]   PREFETCH window: 0x00000000e0000000-0x00000000efffffff
Oct 15 01:13:50 glynn-desktop kernel: [    0.302873] PCI: Bridge: 0000:00:10.0
Oct 15 01:13:50 glynn-desktop kernel: [    0.302875]   IO window: 9000-9fff
Oct 15 01:13:50 glynn-desktop kernel: [    0.302878]   MEM window: 0xf4000000-0xf40fffff
Oct 15 01:13:50 glynn-desktop kernel: [    0.302880]   PREFETCH window: disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    0.302892] PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    0.302898] PCI: Setting latency timer of device 0000:00:03.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    0.302904] PCI: Setting latency timer of device 0000:00:04.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    0.302912] PCI: Setting latency timer of device 0000:00:10.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    0.302938] NET: Registered protocol family 2
Oct 15 01:13:50 glynn-desktop kernel: [    0.303016] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 15 01:13:50 glynn-desktop kernel: [    0.303289] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 15 01:13:50 glynn-desktop kernel: [    0.303977] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 15 01:13:50 glynn-desktop kernel: [    0.304040] Switched to high resolution mode on CPU 0
Oct 15 01:13:50 glynn-desktop kernel: [    0.304403] TCP: Hash tables configured (established 131072 bind 65536)
Oct 15 01:13:50 glynn-desktop kernel: [    0.304405] TCP reno registered
Oct 15 01:13:50 glynn-desktop kernel: [    0.304516] NET: Registered protocol family 1
Oct 15 01:13:50 glynn-desktop kernel: [    0.304613] checking if image is initramfs... it is
Oct 15 01:13:50 glynn-desktop kernel: [    0.722387] Freeing initrd memory: 6037k freed
Oct 15 01:13:50 glynn-desktop kernel: [    0.723056] audit: initializing netlink socket (disabled)
Oct 15 01:13:50 glynn-desktop kernel: [    0.723069] type=2000 audit(1255569215.720:1): initialized
Oct 15 01:13:50 glynn-desktop kernel: [    0.723258] highmem bounce pool size: 64 pages
Oct 15 01:13:50 glynn-desktop kernel: [    0.723261] Total HugeTLB memory allocated, 0
Oct 15 01:13:50 glynn-desktop kernel: [    0.723360] VFS: Disk quotas dquot_6.5.1
Oct 15 01:13:50 glynn-desktop kernel: [    0.723389] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 15 01:13:50 glynn-desktop kernel: [    0.723428] msgmni has been set to 1751
Oct 15 01:13:50 glynn-desktop kernel: [    0.723541] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Oct 15 01:13:50 glynn-desktop kernel: [    0.723544] io scheduler noop registered
Oct 15 01:13:50 glynn-desktop kernel: [    0.723546] io scheduler anticipatory registered
Oct 15 01:13:50 glynn-desktop kernel: [    0.723547] io scheduler deadline registered
Oct 15 01:13:50 glynn-desktop kernel: [    0.723562] io scheduler cfq registered (default)
Oct 15 01:13:50 glynn-desktop kernel: [    0.723575] pci 0000:00:00.0: Enabling HT MSI Mapping
Oct 15 01:13:50 glynn-desktop kernel: [    0.723606] pci 0000:00:02.0: Enabling HT MSI Mapping
Oct 15 01:13:50 glynn-desktop kernel: [    0.723614] pci 0000:00:03.0: Enabling HT MSI Mapping
Oct 15 01:13:50 glynn-desktop kernel: [    0.723623] pci 0000:00:04.0: Enabling HT MSI Mapping
Oct 15 01:13:50 glynn-desktop kernel: [    0.723645] pci 0000:00:09.0: Enabling HT MSI Mapping
Oct 15 01:13:50 glynn-desktop kernel: [    0.723700] pci 0000:00:0e.0: Enabling HT MSI Mapping
Oct 15 01:13:50 glynn-desktop kernel: [    0.723710] pci 0000:00:0f.0: Enabling HT MSI Mapping
Oct 15 01:13:50 glynn-desktop kernel: [    0.723719] pci 0000:00:10.0: Enabling HT MSI Mapping
Oct 15 01:13:50 glynn-desktop kernel: [    0.723730] pci 0000:00:10.1: Enabling HT MSI Mapping
Oct 15 01:13:50 glynn-desktop kernel: [    0.723744] pci 0000:02:00.0: Boot video device
Oct 15 01:13:50 glynn-desktop kernel: [    0.723854] PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    0.723877] assign_interrupt_mode Found MSI capability
Oct 15 01:13:50 glynn-desktop kernel: [    0.723895] Allocate Port Service[0000:00:02.0:pcie00]
Oct 15 01:13:50 glynn-desktop kernel: [    0.723935] Allocate Port Service[0000:00:02.0:pcie03]
Oct 15 01:13:50 glynn-desktop kernel: [    0.723997] PCI: Setting latency timer of device 0000:00:03.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    0.724041] assign_interrupt_mode Found MSI capability
Oct 15 01:13:50 glynn-desktop kernel: [    0.724056] Allocate Port Service[0000:00:03.0:pcie00]
Oct 15 01:13:50 glynn-desktop kernel: [    0.724092] Allocate Port Service[0000:00:03.0:pcie03]
Oct 15 01:13:50 glynn-desktop kernel: [    0.724151] PCI: Setting latency timer of device 0000:00:04.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    0.724172] assign_interrupt_mode Found MSI capability
Oct 15 01:13:50 glynn-desktop kernel: [    0.724187] Allocate Port Service[0000:00:04.0:pcie00]
Oct 15 01:13:50 glynn-desktop kernel: [    0.724223] Allocate Port Service[0000:00:04.0:pcie03]
Oct 15 01:13:50 glynn-desktop kernel: [    0.724501] isapnp: Scanning for PnP cards...
Oct 15 01:13:50 glynn-desktop kernel: [    1.077624] isapnp: No Plug & Play device found
Oct 15 01:13:50 glynn-desktop kernel: [    1.080069] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 15 01:13:50 glynn-desktop kernel: [    1.080192] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 15 01:13:50 glynn-desktop kernel: [    1.080565] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 15 01:13:50 glynn-desktop kernel: [    1.081958] brd: module loaded
Oct 15 01:13:50 glynn-desktop kernel: [    1.082041] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 15 01:13:50 glynn-desktop kernel: [    1.084870] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 15 01:13:50 glynn-desktop kernel: [    1.084876] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 15 01:13:50 glynn-desktop kernel: [    1.085021] mice: PS/2 mouse device common for all mice
Oct 15 01:13:50 glynn-desktop kernel: [    1.085140] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 15 01:13:50 glynn-desktop kernel: [    1.085160] rtc0: alarms up to one year, y3k
Oct 15 01:13:50 glynn-desktop kernel: [    1.085193] cpuidle: using governor ladder
Oct 15 01:13:50 glynn-desktop kernel: [    1.085195] cpuidle: using governor menu
Oct 15 01:13:50 glynn-desktop kernel: [    1.085199] No iBFT detected.
Oct 15 01:13:50 glynn-desktop kernel: [    1.085620] TCP cubic registered
Oct 15 01:13:50 glynn-desktop kernel: [    1.085623] NET: Registered protocol family 17
Oct 15 01:13:50 glynn-desktop kernel: [    1.085629] Using IPI No-Shortcut mode
Oct 15 01:13:50 glynn-desktop kernel: [    1.085742] registered taskstats version 1
Oct 15 01:13:50 glynn-desktop kernel: [    1.085887] rtc_cmos 00:04: setting system clock to 2009-10-15 01:13:37 UTC (1255569217)
Oct 15 01:13:50 glynn-desktop kernel: [    1.086046] Freeing unused kernel memory: 244k freed
Oct 15 01:13:50 glynn-desktop kernel: [    1.106107] input: AT Translated Set 2 keyboard as /class/input/input0
Oct 15 01:13:50 glynn-desktop kernel: [    1.167484] ACPI: ACPI0007:00 is registered as cooling_device0
Oct 15 01:13:50 glynn-desktop kernel: [    1.654208] usbcore: registered new interface driver usbfs
Oct 15 01:13:50 glynn-desktop kernel: [    1.654233] usbcore: registered new interface driver hub
Oct 15 01:13:50 glynn-desktop kernel: [    1.654284] usbcore: registered new device driver usb
Oct 15 01:13:50 glynn-desktop kernel: [    1.655107] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 15 01:13:50 glynn-desktop kernel: [    1.655462] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Oct 15 01:13:50 glynn-desktop kernel: [    1.655467] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
Oct 15 01:13:50 glynn-desktop kernel: [    1.655478] PCI: Setting latency timer of device 0000:00:0b.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    1.655481] ohci_hcd 0000:00:0b.0: OHCI Host Controller
Oct 15 01:13:50 glynn-desktop kernel: [    1.655602] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
Oct 15 01:13:50 glynn-desktop kernel: [    1.655619] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xf4105000
Oct 15 01:13:50 glynn-desktop kernel: [    1.683711] Uniform Multi-Platform E-IDE driver
Oct 15 01:13:50 glynn-desktop kernel: [    1.683716] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 15 01:13:50 glynn-desktop kernel: [    1.710109] usb usb1: configuration #1 chosen from 1 choice
Oct 15 01:13:50 glynn-desktop kernel: [    1.710135] hub 1-0:1.0: USB hub found
Oct 15 01:13:50 glynn-desktop kernel: [    1.710145] hub 1-0:1.0: 8 ports detected
Oct 15 01:13:50 glynn-desktop kernel: [    1.812166] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Oct 15 01:13:50 glynn-desktop kernel: [    1.812170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 15 01:13:50 glynn-desktop kernel: [    1.812173] usb usb1: Product: OHCI Host Controller
Oct 15 01:13:50 glynn-desktop kernel: [    1.812175] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Oct 15 01:13:50 glynn-desktop kernel: [    1.812177] usb usb1: SerialNumber: 0000:00:0b.0
Oct 15 01:13:50 glynn-desktop kernel: [    1.813281] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Oct 15 01:13:50 glynn-desktop kernel: [    1.813287] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
Oct 15 01:13:50 glynn-desktop kernel: [    1.813298] PCI: Setting latency timer of device 0000:00:0b.1 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    1.813301] ehci_hcd 0000:00:0b.1: EHCI Host Controller
Oct 15 01:13:50 glynn-desktop kernel: [    1.813322] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
Oct 15 01:13:50 glynn-desktop kernel: [    1.813347] ehci_hcd 0000:00:0b.1: debug port 1
Oct 15 01:13:50 glynn-desktop kernel: [    1.813351] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
Oct 15 01:13:50 glynn-desktop kernel: [    1.813363] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xf4106000
Oct 15 01:13:50 glynn-desktop kernel: [    1.824042] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 15 01:13:50 glynn-desktop kernel: [    1.824126] usb usb2: configuration #1 chosen from 1 choice
Oct 15 01:13:50 glynn-desktop kernel: [    1.824150] hub 2-0:1.0: USB hub found
Oct 15 01:13:50 glynn-desktop kernel: [    1.824157] hub 2-0:1.0: 8 ports detected
Oct 15 01:13:50 glynn-desktop kernel: [    1.865938] Floppy drive(s): fd0 is 1.44M
Oct 15 01:13:50 glynn-desktop kernel: [    1.883750] FDC 0 is a post-1991 82077
Oct 15 01:13:50 glynn-desktop kernel: [    1.928115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Oct 15 01:13:50 glynn-desktop kernel: [    1.928119] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 15 01:13:50 glynn-desktop kernel: [    1.928121] usb usb2: Product: EHCI Host Controller
Oct 15 01:13:50 glynn-desktop kernel: [    1.928123] usb usb2: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Oct 15 01:13:50 glynn-desktop kernel: [    1.928125] usb usb2: SerialNumber: 0000:00:0b.1
Oct 15 01:13:50 glynn-desktop kernel: [    1.928342] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
Oct 15 01:13:50 glynn-desktop kernel: [    1.928683] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
Oct 15 01:13:50 glynn-desktop kernel: [    1.928688] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
Oct 15 01:13:50 glynn-desktop kernel: [    1.928694] PCI: Setting latency timer of device 0000:00:14.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    2.448770] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:3e:7b:12
Oct 15 01:13:50 glynn-desktop kernel: [    2.448773] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
Oct 15 01:13:50 glynn-desktop kernel: [    2.451130] No dock devices found.
Oct 15 01:13:50 glynn-desktop kernel: [    2.457216] SCSI subsystem initialized
Oct 15 01:13:50 glynn-desktop kernel: [    2.464089] libata version 3.00 loaded.
Oct 15 01:13:50 glynn-desktop kernel: [    2.467271] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Oct 15 01:13:50 glynn-desktop kernel: [    2.467277] ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
Oct 15 01:13:50 glynn-desktop kernel: [    2.520044] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[f4000000-f40007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Oct 15 01:13:50 glynn-desktop kernel: [    2.525104] usb 1-2: new full speed USB device using ohci_hcd and address 2
Oct 15 01:13:50 glynn-desktop kernel: [    2.526368] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
Oct 15 01:13:50 glynn-desktop kernel: [    2.526372] NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xa1) at  PCI slot 0000:00:0d.0
Oct 15 01:13:50 glynn-desktop kernel: [    2.526389] NFORCE-MCP51: not 100% native mode: will probe irqs later
Oct 15 01:13:50 glynn-desktop kernel: [    2.526392] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
Oct 15 01:13:50 glynn-desktop kernel: [    2.526401]     ide0: BM-DMA at 0xf000-0xf007
Oct 15 01:13:50 glynn-desktop kernel: [    2.526407]     ide1: BM-DMA at 0xf008-0xf00f
Oct 15 01:13:50 glynn-desktop kernel: [    2.526411] Probing IDE interface ide0...
Oct 15 01:13:50 glynn-desktop kernel: [    2.736010] usb 1-2: configuration #1 chosen from 1 choice
Oct 15 01:13:50 glynn-desktop kernel: [    2.736010] usb 1-2: New USB device found, idVendor=04f9, idProduct=01d6
Oct 15 01:13:50 glynn-desktop kernel: [    2.736010] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
Oct 15 01:13:50 glynn-desktop kernel: [    2.736010] usb 1-2: SerialNumber: BROF8F861057
Oct 15 01:13:50 glynn-desktop kernel: [    2.781880] Initializing USB Mass Storage driver...
Oct 15 01:13:50 glynn-desktop kernel: [    2.781995] scsi0 : SCSI emulation for USB Mass Storage devices
Oct 15 01:13:50 glynn-desktop kernel: [    2.782093] usbcore: registered new interface driver usb-storage
Oct 15 01:13:50 glynn-desktop kernel: [    2.782097] USB Mass Storage support registered.
Oct 15 01:13:50 glynn-desktop kernel: [    2.782987] usb-storage: device found at 2
Oct 15 01:13:50 glynn-desktop kernel: [    2.782990] usb-storage: waiting for device to settle before scanning
Oct 15 01:13:50 glynn-desktop kernel: [    3.260123] hda: ATAPI DVD+/-R/RW16XMAX, ATAPI CD/DVD-ROM drive
Oct 15 01:13:50 glynn-desktop kernel: [    3.804127] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00001485003b0892]
Oct 15 01:13:50 glynn-desktop kernel: [    4.044123] hdb: ATAPI DVD-ROM 16XMax, ATAPI CD/DVD-ROM drive
Oct 15 01:13:50 glynn-desktop kernel: [    4.100053] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Oct 15 01:13:50 glynn-desktop kernel: [    4.100504] hda: UDMA/33 mode selected
Oct 15 01:13:50 glynn-desktop kernel: [    4.100855] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Oct 15 01:13:50 glynn-desktop kernel: [    4.100933] hdb: UDMA/33 mode selected
Oct 15 01:13:50 glynn-desktop kernel: [    4.101028] Probing IDE interface ide1...
Oct 15 01:13:50 glynn-desktop kernel: [    4.388121] hdc: Maxtor 6Y200P0, ATA DISK drive
Oct 15 01:13:50 glynn-desktop kernel: [    5.060037] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Oct 15 01:13:50 glynn-desktop kernel: [    5.060152] hdc: UDMA/133 mode selected
Oct 15 01:13:50 glynn-desktop kernel: [    5.060294] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 15 01:13:50 glynn-desktop kernel: [    5.062041] ide1 at 0x170-0x177,0x376 on irq 15
Oct 15 01:13:50 glynn-desktop kernel: [    5.075516] sata_nv 0000:00:0e.0: version 3.5
Oct 15 01:13:50 glynn-desktop kernel: [    5.075516] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
Oct 15 01:13:50 glynn-desktop kernel: [    5.075516] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
Oct 15 01:13:50 glynn-desktop kernel: [    5.075516] sata_nv 0000:00:0e.0: Using SWNCQ mode
Oct 15 01:13:50 glynn-desktop kernel: [    5.075516] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    5.076456] scsi1 : sata_nv
Oct 15 01:13:50 glynn-desktop kernel: [    5.076535] scsi2 : sata_nv
Oct 15 01:13:50 glynn-desktop kernel: [    5.076664] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 20
Oct 15 01:13:50 glynn-desktop kernel: [    5.076667] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 20
Oct 15 01:13:50 glynn-desktop kernel: [    5.552047] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 15 01:13:50 glynn-desktop kernel: [    5.560312] ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
Oct 15 01:13:50 glynn-desktop kernel: [    5.560314] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Oct 15 01:13:50 glynn-desktop kernel: [    5.576291] ata1.00: configured for UDMA/133
Oct 15 01:13:50 glynn-desktop kernel: [    5.906471] ata2: SATA link down (SStatus 0 SControl 300)
Oct 15 01:13:50 glynn-desktop kernel: [    5.906561] scsi 1:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
Oct 15 01:13:50 glynn-desktop kernel: [    5.906959] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
Oct 15 01:13:50 glynn-desktop kernel: [    5.906962] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
Oct 15 01:13:50 glynn-desktop kernel: [    5.906967] sata_nv 0000:00:0f.0: Using SWNCQ mode
Oct 15 01:13:50 glynn-desktop kernel: [    5.907011] PCI: Setting latency timer of device 0000:00:0f.0 to 64
Oct 15 01:13:50 glynn-desktop kernel: [    5.907148] scsi3 : sata_nv
Oct 15 01:13:50 glynn-desktop kernel: [    5.907211] scsi4 : sata_nv
Oct 15 01:13:50 glynn-desktop kernel: [    5.907330] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 23
Oct 15 01:13:50 glynn-desktop kernel: [    5.907333] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 23
Oct 15 01:13:50 glynn-desktop kernel: [    6.380041] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 15 01:13:50 glynn-desktop kernel: [    6.388359] ata3.00: ATA-7: Maxtor 6Y200M0, YAR51HW0, max UDMA/133
Oct 15 01:13:50 glynn-desktop kernel: [    6.388362] ata3.00: 398297088 sectors, multi 0: LBA48 
Oct 15 01:13:50 glynn-desktop kernel: [    6.404371] ata3.00: configured for UDMA/133
Oct 15 01:13:50 glynn-desktop kernel: [    6.734472] ata4: SATA link down (SStatus 0 SControl 300)
Oct 15 01:13:50 glynn-desktop kernel: [    6.734574] scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6Y200M0   YAR5 PQ: 0 ANSI: 5
Oct 15 01:13:50 glynn-desktop kernel: [    6.734579] ata3.00: Disabling SWNCQ mode (depth 1)
Oct 15 01:13:50 glynn-desktop kernel: [    6.768837] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Oct 15 01:13:50 glynn-desktop kernel: [    6.768843] Uniform CD-ROM driver Revision: 3.20
Oct 15 01:13:50 glynn-desktop kernel: [    6.780155] hdb: ATAPI 40X DVD-ROM drive, 512kB Cache
Oct 15 01:13:50 glynn-desktop kernel: [    6.781644] hdc: max request size: 512KiB
Oct 15 01:13:50 glynn-desktop kernel: [    6.786045] hdc: Host Protected Area detected.
Oct 15 01:13:50 glynn-desktop kernel: [    6.786046] 	current capacity is 398294975 sectors (203927 MB)
Oct 15 01:13:50 glynn-desktop kernel: [    6.786047] 	native  capacity is 398297088 sectors (203928 MB)
Oct 15 01:13:50 glynn-desktop kernel: [    6.791982] Driver 'sd' needs updating - please use bus_type methods
Oct 15 01:13:50 glynn-desktop kernel: [    6.792074] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Oct 15 01:13:50 glynn-desktop kernel: [    6.792096] sd 1:0:0:0: [sda] Write Protect is off
Oct 15 01:13:50 glynn-desktop kernel: [    6.792099] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 15 01:13:50 glynn-desktop kernel: [    6.792138] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 01:13:50 glynn-desktop kernel: [    6.792202] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Oct 15 01:13:50 glynn-desktop kernel: [    6.792223] sd 1:0:0:0: [sda] Write Protect is off
Oct 15 01:13:50 glynn-desktop kernel: [    6.792225] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 15 01:13:50 glynn-desktop kernel: [    6.792263] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 01:13:50 glynn-desktop kernel: [    6.792267]  sda:<6>hdc: Host Protected Area disabled.
Oct 15 01:13:50 glynn-desktop kernel: [    6.810702] hdc: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63
Oct 15 01:13:50 glynn-desktop kernel: [    6.810835] hdc: cache flushes supported
Oct 15 01:13:50 glynn-desktop kernel: [    6.810873]  hdc: sda1
Oct 15 01:13:50 glynn-desktop kernel: [    6.812812] sd 1:0:0:0: [sda] Attached SCSI disk
Oct 15 01:13:50 glynn-desktop kernel: [    6.812812] sd 3:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
Oct 15 01:13:50 glynn-desktop kernel: [    6.812812] sd 3:0:0:0: [sdb] Write Protect is off
Oct 15 01:13:50 glynn-desktop kernel: [    6.812812] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Oct 15 01:13:50 glynn-desktop kernel: [    6.812812] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 01:13:50 glynn-desktop kernel: [    6.812812] sd 3:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
Oct 15 01:13:50 glynn-desktop kernel: [    6.812812] sd 3:0:0:0: [sdb] Write Protect is off
Oct 15 01:13:50 glynn-desktop kernel: [    6.812812] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Oct 15 01:13:50 glynn-desktop kernel: [    6.812812] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 01:13:50 glynn-desktop kernel: [    6.812812]  sdb: sdb1
Oct 15 01:13:50 glynn-desktop kernel: [    6.821795] sd 3:0:0:0: [sdb] Attached SCSI disk
Oct 15 01:13:50 glynn-desktop kernel: [    6.833144]  hdc1 hdc2 < hdc5 hdc6 >
Oct 15 01:13:50 glynn-desktop kernel: [    7.204460] PM: Starting manual resume from disk
Oct 15 01:13:50 glynn-desktop kernel: [    7.215552] EXT3-fs: INFO: recovery required on readonly filesystem.
Oct 15 01:13:50 glynn-desktop kernel: [    7.215556] EXT3-fs: write access will be enabled during recovery.
Oct 15 01:13:50 glynn-desktop kernel: [    7.288131] kjournald starting.  Commit interval 5 seconds
Oct 15 01:13:50 glynn-desktop kernel: [    7.288131] EXT3-fs: recovery complete.
Oct 15 01:13:50 glynn-desktop kernel: [    7.288131] EXT3-fs: mounted filesystem with ordered data mode.
Oct 15 01:13:50 glynn-desktop kernel: [    7.781089] usb-storage: device scan complete
Oct 15 01:13:50 glynn-desktop kernel: [    7.806083] scsi 0:0:0:0: Direct-Access     Brother  MFC-260C         1.00 PQ: 0 ANSI: 2
Oct 15 01:13:50 glynn-desktop kernel: [    7.836010] sd 0:0:0:0: [sdc] Attached SCSI removable disk
Oct 15 01:13:50 glynn-desktop kernel: [    8.629580] udevd version 125 started
Oct 15 01:13:50 glynn-desktop kernel: [    9.884722] input: Power Button (FF) as /class/input/input1
Oct 15 01:13:50 glynn-desktop kernel: [    9.915191] ACPI: Power Button (FF) [PWRF]
Oct 15 01:13:50 glynn-desktop kernel: [    9.915257] input: Power Button (CM) as /class/input/input2
Oct 15 01:13:50 glynn-desktop kernel: [    9.945978] ACPI: Power Button (CM) [PWRB]
Oct 15 01:13:50 glynn-desktop kernel: [   10.694049] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
Oct 15 01:13:50 glynn-desktop kernel: [   10.694064] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
Oct 15 01:13:50 glynn-desktop kernel: [   10.747089] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01D6
Oct 15 01:13:50 glynn-desktop kernel: [   10.747104] usbcore: registered new interface driver usblp
Oct 15 01:13:50 glynn-desktop kernel: [   11.142073] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
Oct 15 01:13:50 glynn-desktop kernel: [   11.142078] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
Oct 15 01:13:50 glynn-desktop kernel: [   11.142096] PCI: Setting latency timer of device 0000:00:10.1 to 64
Oct 15 01:13:50 glynn-desktop kernel: [   11.289848] input: PC Speaker as /class/input/input3
Oct 15 01:13:50 glynn-desktop kernel: [   11.443860] logips2pp: Detected unknown logitech mouse model 62
Oct 15 01:13:50 glynn-desktop kernel: [   11.938729] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input4
Oct 15 01:13:50 glynn-desktop kernel: [   11.944114] parport_pc 00:09: reported by Plug and Play ACPI
Oct 15 01:13:50 glynn-desktop kernel: [   11.944171] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Oct 15 01:13:50 glynn-desktop kernel: [   12.712590] Adding 4112600k swap on /dev/hdc5.  Priority:-1 extents:1 across:4112600k
Oct 15 01:13:50 glynn-desktop kernel: [   13.117313] EXT3 FS on hdc6, internal journal
Oct 15 01:13:50 glynn-desktop kernel: [   13.262708] loop: module loaded
Oct 15 01:13:50 glynn-desktop kernel: [   14.836937] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)
Oct 15 01:13:50 glynn-desktop kernel: [   14.836963] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6
Oct 15 01:13:50 glynn-desktop kernel: [   14.836965] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
Oct 15 01:13:50 glynn-desktop rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="2401" x-info="http://www.rsyslog.com";] restart
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: Found user 'avahi' (UID 104) and group 'avahi' (GID 109).
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: Successfully dropped root privileges.
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: avahi-daemon 0.6.23 starting up.
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: Successfully called chroot().
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: Successfully dropped remaining capabilities.
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: No service file found in /etc/avahi/services.
Oct 15 01:13:51 glynn-desktop kernel: [   15.700437] NET: Registered protocol family 10
Oct 15 01:13:51 glynn-desktop kernel: [   15.700868] lo: Disabled Privacy Extensions
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::214:85ff:fe3e:7b12.
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: New relevant interface eth0.IPv6 for mDNS.
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: Network interface enumeration completed.
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: Registering new address record for fe80::214:85ff:fe3e:7b12 on eth0.*.
Oct 15 01:13:51 glynn-desktop avahi-daemon[2434]: Registering HINFO record with values 'I686'/'LINUX'.
Oct 15 01:13:51 glynn-desktop dhclient: Listening on LPF/eth0/00:14:85:3e:7b:12
Oct 15 01:13:51 glynn-desktop dhclient: Sending on   LPF/eth0/00:14:85:3e:7b:12
Oct 15 01:13:51 glynn-desktop dhclient: Sending on   Socket/fallback
Oct 15 01:13:51 glynn-desktop kernel: [   15.898025] lp0: using parport0 (interrupt-driven).
Oct 15 01:13:51 glynn-desktop kernel: [   15.913140] ppdev: user-space parallel port driver
Oct 15 01:13:52 glynn-desktop avahi-daemon[2434]: Server startup complete. Host name is glynn-desktop.local. Local service cookie is 2951411826.
Oct 15 01:13:52 glynn-desktop kernel: [   17.145279] exim4[2730]: segfault at 81f3f60 ip b7c53e18 sp bf9a4a3c error 4 in libc-2.7.so[b7bde000+155000]
Oct 15 01:13:53 glynn-desktop dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
Oct 15 01:13:53 glynn-desktop kernel: [   17.300028] Clocksource tsc unstable (delta = -154904514 ns)
Oct 15 01:13:53 glynn-desktop dhcdbd: Started up.
Oct 15 01:13:53 glynn-desktop NetworkManager: <info>  starting...
Oct 15 01:13:54 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:13:54 glynn-desktop anacron[2799]: Anacron 2.3 started on 2009-10-15
Oct 15 01:13:54 glynn-desktop dhclient: DHCPOFFER from 192.168.0.1
Oct 15 01:13:54 glynn-desktop dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
Oct 15 01:13:54 glynn-desktop anacron[2799]: Will run job `cron.daily' in 5 min.
Oct 15 01:13:54 glynn-desktop anacron[2799]: Will run job `cron.weekly' in 10 min.
Oct 15 01:13:54 glynn-desktop anacron[2799]: Will run job `cron.monthly' in 15 min.
Oct 15 01:13:54 glynn-desktop anacron[2799]: Jobs will be executed sequentially
Oct 15 01:13:54 glynn-desktop /usr/sbin/cron[2826]: (CRON) INFO (pidfile fd = 3)
Oct 15 01:13:54 glynn-desktop /usr/sbin/cron[2827]: (CRON) STARTUP (fork ok)
Oct 15 01:13:54 glynn-desktop /usr/sbin/cron[2827]: (CRON) INFO (Running @reboot jobs)
Oct 15 01:13:55 glynn-desktop dhcdbd: Shut down.
Oct 15 01:13:55 glynn-desktop init: PANIC: segmentation violation at 0xbfeab000! sleeping for 30 seconds.
Oct 15 01:13:56 glynn-desktop dhclient: DHCPACK from 192.168.0.1
Oct 15 01:13:56 glynn-desktop dhclient: bound to 192.168.0.8 -- renewal in 34158 seconds.
Oct 15 01:13:57 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:00 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:03 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:06 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:09 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:12 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:15 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:18 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:21 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:24 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:25 glynn-desktop init: PANIC: segmentation violation at 0xbfeab000! sleeping for 30 seconds.
Oct 15 01:14:27 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:30 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:33 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:36 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:39 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:42 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:45 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:48 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 01:14:51 glynn-desktop NetworkManager: <WARN>  nm_dbus_init(): nm_dbus_init() could not get the system bus.  Make sure the message bus daemon is running!
Oct 15 02:18:46 glynn-desktop kernel: imklog 3.18.6, log source = /proc/kmsg started.
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Initializing cgroup subsys cpuset
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Initializing cgroup subsys cpu
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-19) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 06:06:52 UTC 2009
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] BIOS-provided physical RAM map:
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]  BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] 1151MB HIGHMEM available.
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] 896MB LOWMEM available.
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] found SMP MP-table at [c00f5240] 000f5240
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Zone PFN ranges:
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   DMA             0 ->     4096
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   Normal       4096 ->   229376
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   HighMem    229376 ->   524272
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Movable zone start PFN for each node
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] early_node_map[1] active PFN ranges
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]     0:        0 ->   524272
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] On node 0 totalpages: 524272
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   DMA zone: 0 pages reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   Normal zone: 1760 pages used for memmap
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   HighMem zone: 2304 pages used for memmap
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   HighMem zone: 292592 pages, LIFO batch:31
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000]   Movable zone: 0 pages used for memmap
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] DMI 2.3 present.
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: RSDP 000F6BF0, 0014 (r0 GBT   )
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: RSDT 7FFF3000, 0030 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: FACP 7FFF3040, 0074 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: DSDT 7FFF30C0, 4D95 (r1 GBT    AWRDACPI     1000 MSFT  100000C)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: FACS 7FFF0000, 0040
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: MCFG 7FFF7F00, 003C (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: APIC 7FFF7E80, 0072 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Nvidia board detected. Ignoring ACPI timer override.
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] If you got timer trouble try acpi_use_timer_override
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1008
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: IRQ9 used by override.
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: IRQ14 used by override.
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] ACPI: IRQ15 used by override.
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] NR_CPUS: 8, nr_cpu_ids: 2
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520176
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Kernel command line: root=/dev/hdc6 ro single
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] mapped APIC to ffffb000 (fee00000)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Enabling fast FPU save and restore... done.
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Initializing CPU#0
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Oct 15 02:18:46 glynn-desktop kernel: [    0.000000] Detected 2210.046 MHz processor.
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000] spurious 8259A interrupt: IRQ7.
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000] Console: colour VGA+ 80x25
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000] console [tty0] enabled
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000] Memory: 2069176k/2097088k available (1770k kernel code, 26620k reserved, 751k data, 244k init, 1179584k highmem)
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000] virtual kernel memory layout:
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000]       .data : 0xc02ba9a9 - 0xc0376620   ( 751 kB)
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000]       .text : 0xc0100000 - 0xc02ba9a9   (1770 kB)
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Oct 15 02:18:46 glynn-desktop kernel: [    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Oct 15 02:18:46 glynn-desktop kernel: [    0.084068] Calibrating delay using timer specific routine.. 4424.37 BogoMIPS (lpj=8848751)
Oct 15 02:18:46 glynn-desktop kernel: [    0.084152] Security Framework initialized
Oct 15 02:18:46 glynn-desktop kernel: [    0.084183] SELinux:  Disabled at boot.
Oct 15 02:18:46 glynn-desktop kernel: [    0.084211] Capability LSM initialized
Oct 15 02:18:46 glynn-desktop kernel: [    0.084250] Mount-cache hash table entries: 512
Oct 15 02:18:46 glynn-desktop kernel: [    0.084403] Initializing cgroup subsys ns
Oct 15 02:18:46 glynn-desktop kernel: [    0.084432] Initializing cgroup subsys cpuacct
Oct 15 02:18:46 glynn-desktop kernel: [    0.084460] Initializing cgroup subsys devices
Oct 15 02:18:46 glynn-desktop kernel: [    0.084502] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 15 02:18:46 glynn-desktop kernel: [    0.084531] CPU: L2 Cache: 512K (64 bytes/line)
Oct 15 02:18:46 glynn-desktop kernel: [    0.084559] Intel machine check architecture supported.
Oct 15 02:18:46 glynn-desktop kernel: [    0.084588] Intel machine check reporting enabled on CPU#0.
Oct 15 02:18:46 glynn-desktop kernel: [    0.084624] Checking 'hlt' instruction... OK.
Oct 15 02:18:46 glynn-desktop kernel: [    0.100274] SMP alternatives: switching to UP code
Oct 15 02:18:46 glynn-desktop kernel: [    0.105652] ACPI: Core revision 20080321
Oct 15 02:18:46 glynn-desktop kernel: [    0.113675] ENABLING IO-APIC IRQs
Oct 15 02:18:46 glynn-desktop kernel: [    0.113908] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Oct 15 02:18:46 glynn-desktop kernel: [    0.157627] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] Brought up 1 CPUs
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] Total of 1 processors activated (4424.37 BogoMIPS).
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] CPU0 attaching sched-domain:
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010]  domain 0: span 0
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010]   groups: 0
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] net_namespace: 660 bytes
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] Booting paravirtualized kernel on bare hardware
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] NET: Registered protocol family 16
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] ACPI: bus type pci registered
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] PCI: MCFG area at f0000000 reserved in E820
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] PCI: Using MMCONFIG for extended config space
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] PCI: Using configuration type 1 for base access
Oct 15 02:18:46 glynn-desktop kernel: [    0.160010] Setting up standard PCI resources
Oct 15 02:18:46 glynn-desktop kernel: [    0.160599] ACPI: EC: Look up EC in DSDT
Oct 15 02:18:46 glynn-desktop kernel: [    0.164230] ACPI Error (dsobject-0501): Package List length (6) larger than NumElements count (2), truncated
Oct 15 02:18:46 glynn-desktop kernel: [    0.164286]  [20080321]
Oct 15 02:18:46 glynn-desktop kernel: [    0.167375] ACPI: Interpreter enabled
Oct 15 02:18:46 glynn-desktop kernel: [    0.167403] ACPI: (supports S0 S1 S4 S5)
Oct 15 02:18:46 glynn-desktop kernel: [    0.167529] ACPI: Using IOAPIC for interrupt routing
Oct 15 02:18:46 glynn-desktop kernel: [    0.176202] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 15 02:18:46 glynn-desktop kernel: [    0.177269] PCI: Transparent bridge - 0000:00:10.0
Oct 15 02:18:46 glynn-desktop kernel: [    0.177311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 15 02:18:46 glynn-desktop kernel: [    0.177613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Oct 15 02:18:46 glynn-desktop kernel: [    0.265123] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.265563] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.266001] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
Oct 15 02:18:46 glynn-desktop kernel: [    0.266391] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.266829] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
Oct 15 02:18:46 glynn-desktop kernel: [    0.267218] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.267655] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.268099] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.268537] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
Oct 15 02:18:46 glynn-desktop kernel: [    0.268927] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.269365] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
Oct 15 02:18:46 glynn-desktop kernel: [    0.269756] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.270195] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
Oct 15 02:18:46 glynn-desktop kernel: [    0.270585] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.271022] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.271460] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
Oct 15 02:18:46 glynn-desktop kernel: [    0.271854] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
Oct 15 02:18:46 glynn-desktop kernel: [    0.272247] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.272687] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
Oct 15 02:18:46 glynn-desktop kernel: [    0.273081] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
Oct 15 02:18:46 glynn-desktop kernel: [    0.273509] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.273839] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.274169] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
Oct 15 02:18:46 glynn-desktop kernel: [    0.274476] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.274805] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
Oct 15 02:18:46 glynn-desktop kernel: [    0.275112] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.275442] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.275772] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.276110] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
Oct 15 02:18:46 glynn-desktop kernel: [    0.276485] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.276883] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
Oct 15 02:18:46 glynn-desktop kernel: [    0.277258] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.277656] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.278054] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
Oct 15 02:18:46 glynn-desktop kernel: [    0.278429] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.278827] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
Oct 15 02:18:46 glynn-desktop kernel: [    0.279202] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
Oct 15 02:18:46 glynn-desktop kernel: [    0.279579] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.279977] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.280377] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
Oct 15 02:18:46 glynn-desktop kernel: [    0.280753] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
Oct 15 02:18:46 glynn-desktop kernel: [    0.281068] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 15 02:18:46 glynn-desktop kernel: [    0.281119] pnp: PnP ACPI init
Oct 15 02:18:46 glynn-desktop kernel: [    0.281150] ACPI: bus type pnp registered
Oct 15 02:18:46 glynn-desktop kernel: [    0.286122] pnp: PnP ACPI: found 13 devices
Oct 15 02:18:46 glynn-desktop kernel: [    0.286151] ACPI: ACPI bus type pnp unregistered
Oct 15 02:18:46 glynn-desktop kernel: [    0.286180] PnPBIOS: Disabled by ACPI PNP
Oct 15 02:18:46 glynn-desktop kernel: [    0.286383] PCI: Using ACPI for IRQ routing
Oct 15 02:18:46 glynn-desktop kernel: [    0.286598] ACPI: RTC can wake from S4
Oct 15 02:18:46 glynn-desktop kernel: [    0.286643] system 00:01: ioport range 0x1000-0x107f has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.286672] system 00:01: ioport range 0x1080-0x10ff has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.286701] system 00:01: ioport range 0x1400-0x147f has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.286732] system 00:01: ioport range 0x1480-0x14ff has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.286761] system 00:01: ioport range 0x1800-0x187f has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.286789] system 00:01: ioport range 0x1880-0x18ff has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.286818] system 00:01: ioport range 0x2000-0x207f has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.286847] system 00:01: ioport range 0x2080-0x20ff has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.286877] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.286908] system 00:01: iomem range 0xf0000000-0xf1ffffff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287605] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287634] system 00:02: ioport range 0x290-0x29f has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287669] system 00:0c: iomem range 0xcf800-0xcffff has been reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287699] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287728] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287757] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287786] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287817] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287848] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287877] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287908] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.287939] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
Oct 15 02:18:46 glynn-desktop kernel: [    0.318274] PCI: Bridge: 0000:00:02.0
Oct 15 02:18:46 glynn-desktop kernel: [    0.318302]   IO window: 7000-7fff
Oct 15 02:18:46 glynn-desktop kernel: [    0.318329]   MEM window: disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.318356]   PREFETCH window: disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.318384] PCI: Bridge: 0000:00:03.0
Oct 15 02:18:46 glynn-desktop kernel: [    0.318411]   IO window: 8000-8fff
Oct 15 02:18:46 glynn-desktop kernel: [    0.318438]   MEM window: disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.318465]   PREFETCH window: disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.318494] PCI: Bridge: 0000:00:04.0
Oct 15 02:18:46 glynn-desktop kernel: [    0.318521]   IO window: a000-afff
Oct 15 02:18:46 glynn-desktop kernel: [    0.318548]   MEM window: 0xf2000000-0xf3ffffff
Oct 15 02:18:46 glynn-desktop kernel: [    0.318576]   PREFETCH window: 0x00000000e0000000-0x00000000efffffff
Oct 15 02:18:46 glynn-desktop kernel: [    0.318606] PCI: Bridge: 0000:00:10.0
Oct 15 02:18:46 glynn-desktop kernel: [    0.318633]   IO window: 9000-9fff
Oct 15 02:18:46 glynn-desktop kernel: [    0.318661]   MEM window: 0xf4000000-0xf40fffff
Oct 15 02:18:46 glynn-desktop kernel: [    0.318689]   PREFETCH window: disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    0.318726] PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    0.318732] PCI: Setting latency timer of device 0000:00:03.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    0.318738] PCI: Setting latency timer of device 0000:00:04.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    0.318745] PCI: Setting latency timer of device 0000:00:10.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    0.318772] NET: Registered protocol family 2
Oct 15 02:18:46 glynn-desktop kernel: [    0.318873] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 15 02:18:46 glynn-desktop kernel: [    0.319145] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 15 02:18:46 glynn-desktop kernel: [    0.319875] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 15 02:18:46 glynn-desktop kernel: [    0.320042] Switched to high resolution mode on CPU 0
Oct 15 02:18:46 glynn-desktop kernel: [    0.320318] TCP: Hash tables configured (established 131072 bind 65536)
Oct 15 02:18:46 glynn-desktop kernel: [    0.320348] TCP reno registered
Oct 15 02:18:46 glynn-desktop kernel: [    0.320482] NET: Registered protocol family 1
Oct 15 02:18:46 glynn-desktop kernel: [    0.320605] checking if image is initramfs... it is
Oct 15 02:18:46 glynn-desktop kernel: [    0.752995] Freeing initrd memory: 6069k freed
Oct 15 02:18:46 glynn-desktop kernel: [    0.753695] audit: initializing netlink socket (disabled)
Oct 15 02:18:46 glynn-desktop kernel: [    0.753733] type=2000 audit(1255573096.752:1): initialized
Oct 15 02:18:46 glynn-desktop kernel: [    0.753948] highmem bounce pool size: 64 pages
Oct 15 02:18:46 glynn-desktop kernel: [    0.753977] Total HugeTLB memory allocated, 0
Oct 15 02:18:46 glynn-desktop kernel: [    0.754093] VFS: Disk quotas dquot_6.5.1
Oct 15 02:18:46 glynn-desktop kernel: [    0.754143] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 15 02:18:46 glynn-desktop kernel: [    0.754203] msgmni has been set to 1751
Oct 15 02:18:46 glynn-desktop kernel: [    0.754334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Oct 15 02:18:46 glynn-desktop kernel: [    0.754366] io scheduler noop registered
Oct 15 02:18:46 glynn-desktop kernel: [    0.754393] io scheduler anticipatory registered
Oct 15 02:18:46 glynn-desktop kernel: [    0.754420] io scheduler deadline registered
Oct 15 02:18:46 glynn-desktop kernel: [    0.754458] io scheduler cfq registered (default)
Oct 15 02:18:46 glynn-desktop kernel: [    0.754496] pci 0000:00:00.0: Enabling HT MSI Mapping
Oct 15 02:18:46 glynn-desktop kernel: [    0.754553] pci 0000:00:02.0: Enabling HT MSI Mapping
Oct 15 02:18:46 glynn-desktop kernel: [    0.754587] pci 0000:00:03.0: Enabling HT MSI Mapping
Oct 15 02:18:46 glynn-desktop kernel: [    0.754621] pci 0000:00:04.0: Enabling HT MSI Mapping
Oct 15 02:18:46 glynn-desktop kernel: [    0.754668] pci 0000:00:09.0: Enabling HT MSI Mapping
Oct 15 02:18:46 glynn-desktop kernel: [    0.754749] pci 0000:00:0e.0: Enabling HT MSI Mapping
Oct 15 02:18:46 glynn-desktop kernel: [    0.754785] pci 0000:00:0f.0: Enabling HT MSI Mapping
Oct 15 02:18:46 glynn-desktop kernel: [    0.754820] pci 0000:00:10.0: Enabling HT MSI Mapping
Oct 15 02:18:46 glynn-desktop kernel: [    0.754856] pci 0000:00:10.1: Enabling HT MSI Mapping
Oct 15 02:18:46 glynn-desktop kernel: [    0.754895] pci 0000:02:00.0: Boot video device
Oct 15 02:18:46 glynn-desktop kernel: [    0.755004] PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    0.755025] assign_interrupt_mode Found MSI capability
Oct 15 02:18:46 glynn-desktop kernel: [    0.755068] Allocate Port Service[0000:00:02.0:pcie00]
Oct 15 02:18:46 glynn-desktop kernel: [    0.755108] Allocate Port Service[0000:00:02.0:pcie03]
Oct 15 02:18:46 glynn-desktop kernel: [    0.755167] PCI: Setting latency timer of device 0000:00:03.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    0.755186] assign_interrupt_mode Found MSI capability
Oct 15 02:18:46 glynn-desktop kernel: [    0.755226] Allocate Port Service[0000:00:03.0:pcie00]
Oct 15 02:18:46 glynn-desktop kernel: [    0.755262] Allocate Port Service[0000:00:03.0:pcie03]
Oct 15 02:18:46 glynn-desktop kernel: [    0.755319] PCI: Setting latency timer of device 0000:00:04.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    0.755338] assign_interrupt_mode Found MSI capability
Oct 15 02:18:46 glynn-desktop kernel: [    0.755379] Allocate Port Service[0000:00:04.0:pcie00]
Oct 15 02:18:46 glynn-desktop kernel: [    0.755414] Allocate Port Service[0000:00:04.0:pcie03]
Oct 15 02:18:46 glynn-desktop kernel: [    0.755691] isapnp: Scanning for PnP cards...
Oct 15 02:18:46 glynn-desktop kernel: [    1.108845] isapnp: No Plug & Play device found
Oct 15 02:18:46 glynn-desktop kernel: [    1.111303] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 15 02:18:46 glynn-desktop kernel: [    1.111457] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 15 02:18:46 glynn-desktop kernel: [    1.111859] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 15 02:18:46 glynn-desktop kernel: [    1.113271] brd: module loaded
Oct 15 02:18:46 glynn-desktop kernel: [    1.113383] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 15 02:18:46 glynn-desktop kernel: [    1.115917] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 15 02:18:46 glynn-desktop kernel: [    1.115950] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 15 02:18:46 glynn-desktop kernel: [    1.116142] mice: PS/2 mouse device common for all mice
Oct 15 02:18:46 glynn-desktop kernel: [    1.116288] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 15 02:18:46 glynn-desktop kernel: [    1.116334] rtc0: alarms up to one year, y3k
Oct 15 02:18:46 glynn-desktop kernel: [    1.116393] cpuidle: using governor ladder
Oct 15 02:18:46 glynn-desktop kernel: [    1.116421] cpuidle: using governor menu
Oct 15 02:18:46 glynn-desktop kernel: [    1.116450] No iBFT detected.
Oct 15 02:18:46 glynn-desktop kernel: [    1.116818] TCP cubic registered
Oct 15 02:18:46 glynn-desktop kernel: [    1.116846] NET: Registered protocol family 17
Oct 15 02:18:46 glynn-desktop kernel: [    1.116877] Using IPI No-Shortcut mode
Oct 15 02:18:46 glynn-desktop kernel: [    1.117012] registered taskstats version 1
Oct 15 02:18:46 glynn-desktop kernel: [    1.117184] rtc_cmos 00:04: setting system clock to 2009-10-15 02:18:17 UTC (1255573097)
Oct 15 02:18:46 glynn-desktop kernel: [    1.117372] Freeing unused kernel memory: 244k freed
Oct 15 02:18:46 glynn-desktop kernel: [    1.137244] input: AT Translated Set 2 keyboard as /class/input/input0
Oct 15 02:18:46 glynn-desktop kernel: [    1.205350] ACPI: ACPI0007:00 is registered as cooling_device0
Oct 15 02:18:46 glynn-desktop kernel: [    1.863859] usbcore: registered new interface driver usbfs
Oct 15 02:18:46 glynn-desktop kernel: [    1.863914] usbcore: registered new interface driver hub
Oct 15 02:18:46 glynn-desktop kernel: [    1.863991] usbcore: registered new device driver usb
Oct 15 02:18:46 glynn-desktop kernel: [    1.864882] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 15 02:18:46 glynn-desktop kernel: [    1.865247] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Oct 15 02:18:46 glynn-desktop kernel: [    1.865280] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
Oct 15 02:18:46 glynn-desktop kernel: [    1.865364] PCI: Setting latency timer of device 0000:00:0b.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    1.865367] ohci_hcd 0000:00:0b.0: OHCI Host Controller
Oct 15 02:18:46 glynn-desktop kernel: [    1.865520] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
Oct 15 02:18:46 glynn-desktop kernel: [    1.865566] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xf4105000
Oct 15 02:18:46 glynn-desktop kernel: [    1.902387] Uniform Multi-Platform E-IDE driver
Oct 15 02:18:46 glynn-desktop kernel: [    1.902421] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 15 02:18:46 glynn-desktop kernel: [    1.922113] usb usb1: configuration #1 chosen from 1 choice
Oct 15 02:18:46 glynn-desktop kernel: [    1.922169] hub 1-0:1.0: USB hub found
Oct 15 02:18:46 glynn-desktop kernel: [    1.922204] hub 1-0:1.0: 8 ports detected
Oct 15 02:18:46 glynn-desktop kernel: [    2.024139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Oct 15 02:18:46 glynn-desktop kernel: [    2.024172] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 15 02:18:46 glynn-desktop kernel: [    2.024203] usb usb1: Product: OHCI Host Controller
Oct 15 02:18:46 glynn-desktop kernel: [    2.024230] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
Oct 15 02:18:46 glynn-desktop kernel: [    2.024258] usb usb1: SerialNumber: 0000:00:0b.0
Oct 15 02:18:46 glynn-desktop kernel: [    2.025454] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Oct 15 02:18:46 glynn-desktop kernel: [    2.025487] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
Oct 15 02:18:46 glynn-desktop kernel: [    2.025571] PCI: Setting latency timer of device 0000:00:0b.1 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    2.025574] ehci_hcd 0000:00:0b.1: EHCI Host Controller
Oct 15 02:18:46 glynn-desktop kernel: [    2.025622] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
Oct 15 02:18:46 glynn-desktop kernel: [    2.025675] ehci_hcd 0000:00:0b.1: debug port 1
Oct 15 02:18:46 glynn-desktop kernel: [    2.025704] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
Oct 15 02:18:46 glynn-desktop kernel: [    2.025715] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xf4106000
Oct 15 02:18:46 glynn-desktop kernel: [    2.036043] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 15 02:18:46 glynn-desktop kernel: [    2.036158] usb usb2: configuration #1 chosen from 1 choice
Oct 15 02:18:46 glynn-desktop kernel: [    2.036207] hub 2-0:1.0: USB hub found
Oct 15 02:18:46 glynn-desktop kernel: [    2.036240] hub 2-0:1.0: 8 ports detected
Oct 15 02:18:46 glynn-desktop kernel: [    2.111495] Floppy drive(s): fd0 is 1.44M
Oct 15 02:18:46 glynn-desktop kernel: [    2.131796] FDC 0 is a post-1991 82077
Oct 15 02:18:46 glynn-desktop kernel: [    2.140148] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Oct 15 02:18:46 glynn-desktop kernel: [    2.140181] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 15 02:18:46 glynn-desktop kernel: [    2.140212] usb usb2: Product: EHCI Host Controller
Oct 15 02:18:46 glynn-desktop kernel: [    2.140240] usb usb2: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
Oct 15 02:18:46 glynn-desktop kernel: [    2.140268] usb usb2: SerialNumber: 0000:00:0b.1
Oct 15 02:18:46 glynn-desktop kernel: [    2.140500] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
Oct 15 02:18:46 glynn-desktop kernel: [    2.140877] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
Oct 15 02:18:46 glynn-desktop kernel: [    2.140908] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
Oct 15 02:18:46 glynn-desktop kernel: [    2.140987] PCI: Setting latency timer of device 0000:00:14.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    2.660745] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:3e:7b:12
Oct 15 02:18:46 glynn-desktop kernel: [    2.660782] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
Oct 15 02:18:46 glynn-desktop kernel: [    2.663043] No dock devices found.
Oct 15 02:18:46 glynn-desktop kernel: [    2.668892] SCSI subsystem initialized
Oct 15 02:18:46 glynn-desktop kernel: [    2.675480] libata version 3.00 loaded.
Oct 15 02:18:46 glynn-desktop kernel: [    2.679566] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Oct 15 02:18:46 glynn-desktop kernel: [    2.679603] ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
Oct 15 02:18:46 glynn-desktop kernel: [    2.732436] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[f4000000-f40007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Oct 15 02:18:46 glynn-desktop kernel: [    2.737477] sata_nv 0000:00:0e.0: version 3.5
Oct 15 02:18:46 glynn-desktop kernel: [    2.737776] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
Oct 15 02:18:46 glynn-desktop kernel: [    2.737805] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
Oct 15 02:18:46 glynn-desktop kernel: [    2.737882] sata_nv 0000:00:0e.0: Using SWNCQ mode
Oct 15 02:18:46 glynn-desktop kernel: [    2.737942] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    2.738090] scsi0 : sata_nv
Oct 15 02:18:46 glynn-desktop kernel: [    2.738199] scsi1 : sata_nv
Oct 15 02:18:46 glynn-desktop kernel: [    2.738350] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 20
Oct 15 02:18:46 glynn-desktop kernel: [    2.738380] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 20
Oct 15 02:18:46 glynn-desktop kernel: [    2.738448] usb 1-2: new full speed USB device using ohci_hcd and address 2
Oct 15 02:18:46 glynn-desktop kernel: [    2.949117] usb 1-2: configuration #1 chosen from 1 choice
Oct 15 02:18:46 glynn-desktop kernel: [    2.952300] usb 1-2: New USB device found, idVendor=04f9, idProduct=01d6
Oct 15 02:18:46 glynn-desktop kernel: [    2.952334] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
Oct 15 02:18:46 glynn-desktop kernel: [    2.952363] usb 1-2: SerialNumber: BROF8F861057
Oct 15 02:18:46 glynn-desktop kernel: [    2.998094] Initializing USB Mass Storage driver...
Oct 15 02:18:46 glynn-desktop kernel: [    2.998233] scsi2 : SCSI emulation for USB Mass Storage devices
Oct 15 02:18:46 glynn-desktop kernel: [    2.998336] usbcore: registered new interface driver usb-storage
Oct 15 02:18:46 glynn-desktop kernel: [    2.998365] USB Mass Storage support registered.
Oct 15 02:18:46 glynn-desktop kernel: [    2.999883] usb-storage: device found at 2
Oct 15 02:18:46 glynn-desktop kernel: [    2.999886] usb-storage: waiting for device to settle before scanning
Oct 15 02:18:46 glynn-desktop kernel: [    3.616049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 15 02:18:46 glynn-desktop kernel: [    3.624293] ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
Oct 15 02:18:46 glynn-desktop kernel: [    3.624321] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Oct 15 02:18:46 glynn-desktop kernel: [    3.632291] ata1.00: configured for UDMA/133
Oct 15 02:18:46 glynn-desktop kernel: [    4.008122] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00001485003b0892]
Oct 15 02:18:46 glynn-desktop kernel: [    4.366464] ata2: SATA link down (SStatus 0 SControl 300)
Oct 15 02:18:46 glynn-desktop kernel: [    4.366592] scsi 0:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
Oct 15 02:18:46 glynn-desktop kernel: [    4.367724] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
Oct 15 02:18:46 glynn-desktop kernel: [    4.367754] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
Oct 15 02:18:46 glynn-desktop kernel: [    4.367831] sata_nv 0000:00:0f.0: Using SWNCQ mode
Oct 15 02:18:46 glynn-desktop kernel: [    4.367894] PCI: Setting latency timer of device 0000:00:0f.0 to 64
Oct 15 02:18:46 glynn-desktop kernel: [    4.370487] scsi3 : sata_nv
Oct 15 02:18:46 glynn-desktop kernel: [    4.370581] scsi4 : sata_nv
Oct 15 02:18:46 glynn-desktop kernel: [    4.370732] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 23
Oct 15 02:18:46 glynn-desktop kernel: [    4.370762] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 23
Oct 15 02:18:46 glynn-desktop kernel: [    5.248047] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 15 02:18:46 glynn-desktop kernel: [    5.256356] ata3.00: ATA-7: Maxtor 6Y200M0, YAR51HW0, max UDMA/133
Oct 15 02:18:46 glynn-desktop kernel: [    5.256385] ata3.00: 398297088 sectors, multi 0: LBA48 
Oct 15 02:18:46 glynn-desktop kernel: [    5.272360] ata3.00: configured for UDMA/133
Oct 15 02:18:46 glynn-desktop kernel: [    6.006461] ata4: SATA link down (SStatus 0 SControl 300)
Oct 15 02:18:46 glynn-desktop kernel: [    6.006571] scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6Y200M0   YAR5 PQ: 0 ANSI: 5
Oct 15 02:18:46 glynn-desktop kernel: [    6.006604] ata3.00: Disabling SWNCQ mode (depth 1)
Oct 15 02:18:46 glynn-desktop kernel: [    6.011283] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
Oct 15 02:18:46 glynn-desktop kernel: [    6.011314] NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xa1) at  PCI slot 0000:00:0d.0
Oct 15 02:18:46 glynn-desktop kernel: [    6.011362] NFORCE-MCP51: not 100% native mode: will probe irqs later
Oct 15 02:18:46 glynn-desktop kernel: [    6.011392] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
Oct 15 02:18:46 glynn-desktop kernel: [    6.011429]     ide0: BM-DMA at 0xf000-0xf007
Oct 15 02:18:46 glynn-desktop kernel: [    6.011460]     ide1: BM-DMA at 0xf008-0xf00f
Oct 15 02:18:46 glynn-desktop kernel: [    6.011489] Probing IDE interface ide0...
Oct 15 02:18:46 glynn-desktop kernel: [    6.744118] hda: ATAPI DVD+/-R/RW16XMAX, ATAPI CD/DVD-ROM drive
Oct 15 02:18:46 glynn-desktop kernel: [    7.528121] hdb: ATAPI DVD-ROM 16XMax, ATAPI CD/DVD-ROM drive
Oct 15 02:18:46 glynn-desktop kernel: [    7.584057] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Oct 15 02:18:46 glynn-desktop kernel: [    7.584473] hda: UDMA/33 mode selected
Oct 15 02:18:46 glynn-desktop kernel: [    7.585078] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Oct 15 02:18:46 glynn-desktop kernel: [    7.585156] hdb: UDMA/33 mode selected
Oct 15 02:18:46 glynn-desktop kernel: [    7.585277] Probing IDE interface ide1...
Oct 15 02:18:46 glynn-desktop kernel: [    7.872122] hdc: Maxtor 6Y200P0, ATA DISK drive
Oct 15 02:18:46 glynn-desktop kernel: [    7.997104] usb-storage: device scan complete
Oct 15 02:18:46 glynn-desktop kernel: [    8.016011] scsi 2:0:0:0: Direct-Access     Brother  MFC-260C         1.00 PQ: 0 ANSI: 2
Oct 15 02:18:46 glynn-desktop kernel: [    8.034980] Driver 'sd' needs updating - please use bus_type methods
Oct 15 02:18:46 glynn-desktop kernel: [    8.035112] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Oct 15 02:18:46 glynn-desktop kernel: [    8.035163] sd 0:0:0:0: [sda] Write Protect is off
Oct 15 02:18:46 glynn-desktop kernel: [    8.035191] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 15 02:18:46 glynn-desktop kernel: [    8.035231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 02:18:46 glynn-desktop kernel: [    8.035327] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Oct 15 02:18:46 glynn-desktop kernel: [    8.035375] sd 0:0:0:0: [sda] Write Protect is off
Oct 15 02:18:46 glynn-desktop kernel: [    8.035403] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 15 02:18:46 glynn-desktop kernel: [    8.035441] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 02:18:46 glynn-desktop kernel: [    8.035474]  sda: sda1
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015] sd 3:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015] sd 3:0:0:0: [sdb] Write Protect is off
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015] sd 3:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015] sd 3:0:0:0: [sdb] Write Protect is off
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015]  sdb: sdb1
Oct 15 02:18:46 glynn-desktop kernel: [    8.056015] sd 3:0:0:0: [sdb] Attached SCSI disk
Oct 15 02:18:46 glynn-desktop kernel: [    8.100055] sd 2:0:0:0: [sdc] Attached SCSI removable disk
Oct 15 02:18:46 glynn-desktop kernel: [    8.544056] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Oct 15 02:18:46 glynn-desktop kernel: [    8.544165] hdc: UDMA/133 mode selected
Oct 15 02:18:46 glynn-desktop kernel: [    8.544302] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 15 02:18:46 glynn-desktop kernel: [    8.546223] ide1 at 0x170-0x177,0x376 on irq 15
Oct 15 02:18:46 glynn-desktop kernel: [    8.628962] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Oct 15 02:18:46 glynn-desktop kernel: [    8.629132] Uniform CD-ROM driver Revision: 3.20
Oct 15 02:18:46 glynn-desktop kernel: [    8.639946] hdb: ATAPI 40X DVD-ROM drive, 512kB Cache
Oct 15 02:18:46 glynn-desktop kernel: [    8.658779] hdc: max request size: 512KiB
Oct 15 02:18:46 glynn-desktop kernel: [    8.659464] hdc: Host Protected Area detected.
Oct 15 02:18:46 glynn-desktop kernel: [    8.659465] 	current capacity is 398294975 sectors (203927 MB)
Oct 15 02:18:46 glynn-desktop kernel: [    8.659466] 	native  capacity is 398297088 sectors (203928 MB)
Oct 15 02:18:46 glynn-desktop kernel: [    8.680994] hdc: Host Protected Area disabled.
Oct 15 02:18:46 glynn-desktop kernel: [    8.680994] hdc: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63
Oct 15 02:18:46 glynn-desktop kernel: [    8.680994] hdc: cache flushes supported
Oct 15 02:18:46 glynn-desktop kernel: [    8.680994]  hdc: hdc1 hdc2 < hdc5 hdc6 >
Oct 15 02:18:46 glynn-desktop kernel: [    9.117751] PM: Starting manual resume from disk
Oct 15 02:18:46 glynn-desktop kernel: [    9.132127] EXT3-fs: INFO: recovery required on readonly filesystem.
Oct 15 02:18:46 glynn-desktop kernel: [    9.132161] EXT3-fs: write access will be enabled during recovery.
Oct 15 02:18:46 glynn-desktop kernel: [   11.435250] kjournald starting.  Commit interval 5 seconds
Oct 15 02:18:46 glynn-desktop kernel: [   11.435250] EXT3-fs: recovery complete.
Oct 15 02:18:46 glynn-desktop kernel: [   11.436010] EXT3-fs: mounted filesystem with ordered data mode.
Oct 15 02:18:46 glynn-desktop kernel: [   12.643768] udevd version 125 started
Oct 15 02:18:46 glynn-desktop kernel: [   13.926946] input: Power Button (FF) as /class/input/input1
Oct 15 02:18:46 glynn-desktop kernel: [   13.952512] ACPI: Power Button (FF) [PWRF]
Oct 15 02:18:46 glynn-desktop kernel: [   13.952631] input: Power Button (CM) as /class/input/input2
Oct 15 02:18:46 glynn-desktop kernel: [   13.987262] ACPI: Power Button (CM) [PWRB]
Oct 15 02:18:46 glynn-desktop kernel: [   14.682134] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
Oct 15 02:18:46 glynn-desktop kernel: [   14.682179] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
Oct 15 02:18:46 glynn-desktop kernel: [   14.742129] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01D6
Oct 15 02:18:46 glynn-desktop kernel: [   14.742181] usbcore: registered new interface driver usblp
Oct 15 02:18:46 glynn-desktop kernel: [   15.081051] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
Oct 15 02:18:46 glynn-desktop kernel: [   15.081086] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
Oct 15 02:18:46 glynn-desktop kernel: [   15.081178] PCI: Setting latency timer of device 0000:00:10.1 to 64
Oct 15 02:18:46 glynn-desktop kernel: [   15.263979] input: PC Speaker as /class/input/input3
Oct 15 02:18:46 glynn-desktop kernel: [   15.445918] logips2pp: Detected unknown logitech mouse model 62
Oct 15 02:18:46 glynn-desktop kernel: [   15.948146] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input4
Oct 15 02:18:46 glynn-desktop kernel: [   15.948146] parport_pc 00:09: reported by Plug and Play ACPI
Oct 15 02:18:46 glynn-desktop kernel: [   15.948146] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Oct 15 02:18:46 glynn-desktop kernel: [   16.632781] Adding 4112600k swap on /dev/hdc5.  Priority:-1 extents:1 across:4112600k
Oct 15 02:18:46 glynn-desktop kernel: [   16.975102] EXT3 FS on hdc6, internal journal
Oct 15 02:18:46 glynn-desktop kernel: [   17.398640] loop: module loaded
Oct 15 02:18:46 glynn-desktop kernel: [   23.483895] NET: Registered protocol family 10
Oct 15 02:18:46 glynn-desktop kernel: [   23.484296] lo: Disabled Privacy Extensions
Oct 15 02:18:46 glynn-desktop kernel: [   30.000012] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)
Oct 15 02:18:46 glynn-desktop kernel: [   30.000012] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6
Oct 15 02:18:46 glynn-desktop kernel: [   30.000012] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
Oct 15 02:18:46 glynn-desktop rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="2524" x-info="http://www.rsyslog.com";] restart
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: Found user 'avahi' (UID 104) and group 'avahi' (GID 109).
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: Successfully dropped root privileges.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: avahi-daemon 0.6.23 starting up.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: Successfully called chroot().
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: Successfully dropped remaining capabilities.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: No service file found in /etc/avahi/services.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::214:85ff:fe3e:7b12.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: New relevant interface eth0.IPv6 for mDNS.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.8.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: New relevant interface eth0.IPv4 for mDNS.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: Network interface enumeration completed.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: Registering new address record for fe80::214:85ff:fe3e:7b12 on eth0.*.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: Registering new address record for 192.168.0.8 on eth0.IPv4.
Oct 15 02:18:47 glynn-desktop avahi-daemon[2557]: Registering HINFO record with values 'I686'/'LINUX'.
Oct 15 02:18:47 glynn-desktop kernel: [   30.724011] lp0: using parport0 (interrupt-driven).
Oct 15 02:18:47 glynn-desktop kernel: [   30.742004] ppdev: user-space parallel port driver
Oct 15 04:34:34 glynn-desktop kernel: imklog 3.18.6, log source = /proc/kmsg started.
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Initializing cgroup subsys cpuset
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Initializing cgroup subsys cpu
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-19) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 06:06:52 UTC 2009
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] BIOS-provided physical RAM map:
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]  BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] 1151MB HIGHMEM available.
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] 896MB LOWMEM available.
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] found SMP MP-table at [c00f5240] 000f5240
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Zone PFN ranges:
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   DMA             0 ->     4096
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   Normal       4096 ->   229376
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   HighMem    229376 ->   524272
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Movable zone start PFN for each node
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] early_node_map[1] active PFN ranges
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]     0:        0 ->   524272
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] On node 0 totalpages: 524272
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   DMA zone: 0 pages reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   Normal zone: 1760 pages used for memmap
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   HighMem zone: 2304 pages used for memmap
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   HighMem zone: 292592 pages, LIFO batch:31
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000]   Movable zone: 0 pages used for memmap
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] DMI 2.3 present.
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: RSDP 000F6BF0, 0014 (r0 GBT   )
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: RSDT 7FFF3000, 0030 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: FACP 7FFF3040, 0074 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: DSDT 7FFF30C0, 4D95 (r1 GBT    AWRDACPI     1000 MSFT  100000C)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: FACS 7FFF0000, 0040
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: MCFG 7FFF7F00, 003C (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: APIC 7FFF7E80, 0072 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Nvidia board detected. Ignoring ACPI timer override.
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] If you got timer trouble try acpi_use_timer_override
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1008
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: IRQ9 used by override.
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: IRQ14 used by override.
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] ACPI: IRQ15 used by override.
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] NR_CPUS: 8, nr_cpu_ids: 2
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520176
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Kernel command line: root=/dev/hdc6 ro single
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] mapped APIC to ffffb000 (fee00000)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Enabling fast FPU save and restore... done.
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Initializing CPU#0
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Oct 15 04:34:34 glynn-desktop kernel: [    0.000000] Detected 2210.109 MHz processor.
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000] spurious 8259A interrupt: IRQ7.
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000] Console: colour VGA+ 80x25
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000] console [tty0] enabled
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000] Memory: 2069176k/2097088k available (1770k kernel code, 26620k reserved, 751k data, 244k init, 1179584k highmem)
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000] virtual kernel memory layout:
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000]       .data : 0xc02ba9a9 - 0xc0376620   ( 751 kB)
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000]       .text : 0xc0100000 - 0xc02ba9a9   (1770 kB)
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Oct 15 04:34:34 glynn-desktop kernel: [    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Oct 15 04:34:34 glynn-desktop kernel: [    0.084069] Calibrating delay using timer specific routine.. 4424.36 BogoMIPS (lpj=8848724)
Oct 15 04:34:34 glynn-desktop kernel: [    0.084152] Security Framework initialized
Oct 15 04:34:34 glynn-desktop kernel: [    0.084183] SELinux:  Disabled at boot.
Oct 15 04:34:34 glynn-desktop kernel: [    0.084211] Capability LSM initialized
Oct 15 04:34:34 glynn-desktop kernel: [    0.084250] Mount-cache hash table entries: 512
Oct 15 04:34:34 glynn-desktop kernel: [    0.084403] Initializing cgroup subsys ns
Oct 15 04:34:34 glynn-desktop kernel: [    0.084432] Initializing cgroup subsys cpuacct
Oct 15 04:34:34 glynn-desktop kernel: [    0.084460] Initializing cgroup subsys devices
Oct 15 04:34:34 glynn-desktop kernel: [    0.084501] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 15 04:34:34 glynn-desktop kernel: [    0.084530] CPU: L2 Cache: 512K (64 bytes/line)
Oct 15 04:34:34 glynn-desktop kernel: [    0.084558] Intel machine check architecture supported.
Oct 15 04:34:34 glynn-desktop kernel: [    0.084587] Intel machine check reporting enabled on CPU#0.
Oct 15 04:34:34 glynn-desktop kernel: [    0.084623] Checking 'hlt' instruction... OK.
Oct 15 04:34:34 glynn-desktop kernel: [    0.100275] SMP alternatives: switching to UP code
Oct 15 04:34:34 glynn-desktop kernel: [    0.105652] ACPI: Core revision 20080321
Oct 15 04:34:34 glynn-desktop kernel: [    0.113673] ENABLING IO-APIC IRQs
Oct 15 04:34:34 glynn-desktop kernel: [    0.113906] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Oct 15 04:34:34 glynn-desktop kernel: [    0.157624] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] Brought up 1 CPUs
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] Total of 1 processors activated (4424.36 BogoMIPS).
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] CPU0 attaching sched-domain:
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010]  domain 0: span 0
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010]   groups: 0
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] net_namespace: 660 bytes
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] Booting paravirtualized kernel on bare hardware
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] NET: Registered protocol family 16
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] ACPI: bus type pci registered
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] PCI: MCFG area at f0000000 reserved in E820
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] PCI: Using MMCONFIG for extended config space
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] PCI: Using configuration type 1 for base access
Oct 15 04:34:34 glynn-desktop kernel: [    0.160010] Setting up standard PCI resources
Oct 15 04:34:34 glynn-desktop kernel: [    0.160599] ACPI: EC: Look up EC in DSDT
Oct 15 04:34:34 glynn-desktop kernel: [    0.164229] ACPI Error (dsobject-0501): Package List length (6) larger than NumElements count (2), truncated
Oct 15 04:34:34 glynn-desktop kernel: [    0.164286]  [20080321]
Oct 15 04:34:34 glynn-desktop kernel: [    0.167374] ACPI: Interpreter enabled
Oct 15 04:34:34 glynn-desktop kernel: [    0.167402] ACPI: (supports S0 S1 S4 S5)
Oct 15 04:34:34 glynn-desktop kernel: [    0.167527] ACPI: Using IOAPIC for interrupt routing
Oct 15 04:34:34 glynn-desktop kernel: [    0.176146] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 15 04:34:34 glynn-desktop kernel: [    0.177211] PCI: Transparent bridge - 0000:00:10.0
Oct 15 04:34:34 glynn-desktop kernel: [    0.177253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 15 04:34:34 glynn-desktop kernel: [    0.177555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Oct 15 04:34:34 glynn-desktop kernel: [    0.265104] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.265542] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.265979] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
Oct 15 04:34:34 glynn-desktop kernel: [    0.266368] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.266804] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
Oct 15 04:34:34 glynn-desktop kernel: [    0.267192] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.267627] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.268071] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.268508] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
Oct 15 04:34:34 glynn-desktop kernel: [    0.268897] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.269333] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
Oct 15 04:34:34 glynn-desktop kernel: [    0.269723] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.270160] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
Oct 15 04:34:34 glynn-desktop kernel: [    0.270548] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.270984] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.271420] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
Oct 15 04:34:34 glynn-desktop kernel: [    0.271813] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
Oct 15 04:34:34 glynn-desktop kernel: [    0.272204] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.272643] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
Oct 15 04:34:34 glynn-desktop kernel: [    0.273036] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
Oct 15 04:34:34 glynn-desktop kernel: [    0.273462] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.273793] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.274122] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
Oct 15 04:34:34 glynn-desktop kernel: [    0.274429] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.274757] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
Oct 15 04:34:34 glynn-desktop kernel: [    0.275063] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.275392] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.275722] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.276060] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
Oct 15 04:34:34 glynn-desktop kernel: [    0.276434] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.276832] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
Oct 15 04:34:34 glynn-desktop kernel: [    0.277206] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.277603] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.278000] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
Oct 15 04:34:34 glynn-desktop kernel: [    0.278375] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.278772] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
Oct 15 04:34:34 glynn-desktop kernel: [    0.279147] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
Oct 15 04:34:34 glynn-desktop kernel: [    0.279523] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.279920] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.280324] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
Oct 15 04:34:34 glynn-desktop kernel: [    0.280698] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
Oct 15 04:34:34 glynn-desktop kernel: [    0.281013] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 15 04:34:34 glynn-desktop kernel: [    0.281063] pnp: PnP ACPI init
Oct 15 04:34:34 glynn-desktop kernel: [    0.281095] ACPI: bus type pnp registered
Oct 15 04:34:34 glynn-desktop kernel: [    0.286062] pnp: PnP ACPI: found 13 devices
Oct 15 04:34:34 glynn-desktop kernel: [    0.286090] ACPI: ACPI bus type pnp unregistered
Oct 15 04:34:34 glynn-desktop kernel: [    0.286119] PnPBIOS: Disabled by ACPI PNP
Oct 15 04:34:34 glynn-desktop kernel: [    0.286323] PCI: Using ACPI for IRQ routing
Oct 15 04:34:34 glynn-desktop kernel: [    0.286537] ACPI: RTC can wake from S4
Oct 15 04:34:34 glynn-desktop kernel: [    0.286582] system 00:01: ioport range 0x1000-0x107f has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.286611] system 00:01: ioport range 0x1080-0x10ff has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.286640] system 00:01: ioport range 0x1400-0x147f has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.286670] system 00:01: ioport range 0x1480-0x14ff has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.286699] system 00:01: ioport range 0x1800-0x187f has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.286728] system 00:01: ioport range 0x1880-0x18ff has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.286757] system 00:01: ioport range 0x2000-0x207f has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.286785] system 00:01: ioport range 0x2080-0x20ff has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.286815] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.286846] system 00:01: iomem range 0xf0000000-0xf1ffffff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287541] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287569] system 00:02: ioport range 0x290-0x29f has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287605] system 00:0c: iomem range 0xcf800-0xcffff has been reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287634] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287663] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287692] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287721] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287752] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287783] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287812] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287843] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.287874] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
Oct 15 04:34:34 glynn-desktop kernel: [    0.318210] PCI: Bridge: 0000:00:02.0
Oct 15 04:34:34 glynn-desktop kernel: [    0.318238]   IO window: 7000-7fff
Oct 15 04:34:34 glynn-desktop kernel: [    0.318265]   MEM window: disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.318292]   PREFETCH window: disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.318320] PCI: Bridge: 0000:00:03.0
Oct 15 04:34:34 glynn-desktop kernel: [    0.318347]   IO window: 8000-8fff
Oct 15 04:34:34 glynn-desktop kernel: [    0.318373]   MEM window: disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.318400]   PREFETCH window: disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.318430] PCI: Bridge: 0000:00:04.0
Oct 15 04:34:34 glynn-desktop kernel: [    0.318456]   IO window: a000-afff
Oct 15 04:34:34 glynn-desktop kernel: [    0.318484]   MEM window: 0xf2000000-0xf3ffffff
Oct 15 04:34:34 glynn-desktop kernel: [    0.318511]   PREFETCH window: 0x00000000e0000000-0x00000000efffffff
Oct 15 04:34:34 glynn-desktop kernel: [    0.318540] PCI: Bridge: 0000:00:10.0
Oct 15 04:34:34 glynn-desktop kernel: [    0.318567]   IO window: 9000-9fff
Oct 15 04:34:34 glynn-desktop kernel: [    0.318596]   MEM window: 0xf4000000-0xf40fffff
Oct 15 04:34:34 glynn-desktop kernel: [    0.318623]   PREFETCH window: disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    0.318660] PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    0.318666] PCI: Setting latency timer of device 0000:00:03.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    0.318672] PCI: Setting latency timer of device 0000:00:04.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    0.318679] PCI: Setting latency timer of device 0000:00:10.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    0.318706] NET: Registered protocol family 2
Oct 15 04:34:34 glynn-desktop kernel: [    0.318806] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 15 04:34:34 glynn-desktop kernel: [    0.319078] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 15 04:34:34 glynn-desktop kernel: [    0.319810] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 15 04:34:34 glynn-desktop kernel: [    0.320044] Switched to high resolution mode on CPU 0
Oct 15 04:34:34 glynn-desktop kernel: [    0.320249] TCP: Hash tables configured (established 131072 bind 65536)
Oct 15 04:34:34 glynn-desktop kernel: [    0.320279] TCP reno registered
Oct 15 04:34:34 glynn-desktop kernel: [    0.320412] NET: Registered protocol family 1
Oct 15 04:34:34 glynn-desktop kernel: [    0.320535] checking if image is initramfs... it is
Oct 15 04:34:34 glynn-desktop kernel: [    0.752940] Freeing initrd memory: 6069k freed
Oct 15 04:34:34 glynn-desktop kernel: [    0.753640] audit: initializing netlink socket (disabled)
Oct 15 04:34:34 glynn-desktop kernel: [    0.753679] type=2000 audit(1255573167.752:1): initialized
Oct 15 04:34:34 glynn-desktop kernel: [    0.753893] highmem bounce pool size: 64 pages
Oct 15 04:34:34 glynn-desktop kernel: [    0.753922] Total HugeTLB memory allocated, 0
Oct 15 04:34:34 glynn-desktop kernel: [    0.754039] VFS: Disk quotas dquot_6.5.1
Oct 15 04:34:34 glynn-desktop kernel: [    0.754088] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 15 04:34:34 glynn-desktop kernel: [    0.754148] msgmni has been set to 1751
Oct 15 04:34:34 glynn-desktop kernel: [    0.754279] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Oct 15 04:34:34 glynn-desktop kernel: [    0.754310] io scheduler noop registered
Oct 15 04:34:34 glynn-desktop kernel: [    0.754337] io scheduler anticipatory registered
Oct 15 04:34:34 glynn-desktop kernel: [    0.754364] io scheduler deadline registered
Oct 15 04:34:34 glynn-desktop kernel: [    0.754402] io scheduler cfq registered (default)
Oct 15 04:34:34 glynn-desktop kernel: [    0.754440] pci 0000:00:00.0: Enabling HT MSI Mapping
Oct 15 04:34:34 glynn-desktop kernel: [    0.754496] pci 0000:00:02.0: Enabling HT MSI Mapping
Oct 15 04:34:34 glynn-desktop kernel: [    0.754530] pci 0000:00:03.0: Enabling HT MSI Mapping
Oct 15 04:34:34 glynn-desktop kernel: [    0.754564] pci 0000:00:04.0: Enabling HT MSI Mapping
Oct 15 04:34:34 glynn-desktop kernel: [    0.754612] pci 0000:00:09.0: Enabling HT MSI Mapping
Oct 15 04:34:34 glynn-desktop kernel: [    0.754692] pci 0000:00:0e.0: Enabling HT MSI Mapping
Oct 15 04:34:34 glynn-desktop kernel: [    0.754728] pci 0000:00:0f.0: Enabling HT MSI Mapping
Oct 15 04:34:34 glynn-desktop kernel: [    0.754762] pci 0000:00:10.0: Enabling HT MSI Mapping
Oct 15 04:34:34 glynn-desktop kernel: [    0.754798] pci 0000:00:10.1: Enabling HT MSI Mapping
Oct 15 04:34:34 glynn-desktop kernel: [    0.754837] pci 0000:02:00.0: Boot video device
Oct 15 04:34:34 glynn-desktop kernel: [    0.754947] PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    0.754967] assign_interrupt_mode Found MSI capability
Oct 15 04:34:34 glynn-desktop kernel: [    0.755010] Allocate Port Service[0000:00:02.0:pcie00]
Oct 15 04:34:34 glynn-desktop kernel: [    0.755051] Allocate Port Service[0000:00:02.0:pcie03]
Oct 15 04:34:34 glynn-desktop kernel: [    0.755109] PCI: Setting latency timer of device 0000:00:03.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    0.755129] assign_interrupt_mode Found MSI capability
Oct 15 04:34:34 glynn-desktop kernel: [    0.755169] Allocate Port Service[0000:00:03.0:pcie00]
Oct 15 04:34:34 glynn-desktop kernel: [    0.755204] Allocate Port Service[0000:00:03.0:pcie03]
Oct 15 04:34:34 glynn-desktop kernel: [    0.755262] PCI: Setting latency timer of device 0000:00:04.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    0.755281] assign_interrupt_mode Found MSI capability
Oct 15 04:34:34 glynn-desktop kernel: [    0.755321] Allocate Port Service[0000:00:04.0:pcie00]
Oct 15 04:34:34 glynn-desktop kernel: [    0.755357] Allocate Port Service[0000:00:04.0:pcie03]
Oct 15 04:34:34 glynn-desktop kernel: [    0.755634] isapnp: Scanning for PnP cards...
Oct 15 04:34:34 glynn-desktop kernel: [    1.108796] isapnp: No Plug & Play device found
Oct 15 04:34:34 glynn-desktop kernel: [    1.111251] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 15 04:34:34 glynn-desktop kernel: [    1.111405] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 15 04:34:34 glynn-desktop kernel: [    1.111806] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 15 04:34:34 glynn-desktop kernel: [    1.113218] brd: module loaded
Oct 15 04:34:34 glynn-desktop kernel: [    1.113329] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 15 04:34:34 glynn-desktop kernel: [    1.115862] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 15 04:34:34 glynn-desktop kernel: [    1.115894] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 15 04:34:34 glynn-desktop kernel: [    1.116088] mice: PS/2 mouse device common for all mice
Oct 15 04:34:34 glynn-desktop kernel: [    1.116233] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 15 04:34:34 glynn-desktop kernel: [    1.116279] rtc0: alarms up to one year, y3k
Oct 15 04:34:34 glynn-desktop kernel: [    1.116338] cpuidle: using governor ladder
Oct 15 04:34:34 glynn-desktop kernel: [    1.116366] cpuidle: using governor menu
Oct 15 04:34:34 glynn-desktop kernel: [    1.116394] No iBFT detected.
Oct 15 04:34:34 glynn-desktop kernel: [    1.116762] TCP cubic registered
Oct 15 04:34:34 glynn-desktop kernel: [    1.116790] NET: Registered protocol family 17
Oct 15 04:34:34 glynn-desktop kernel: [    1.116821] Using IPI No-Shortcut mode
Oct 15 04:34:34 glynn-desktop kernel: [    1.116956] registered taskstats version 1
Oct 15 04:34:34 glynn-desktop kernel: [    1.117128] rtc_cmos 00:04: setting system clock to 2009-10-15 02:19:28 UTC (1255573168)
Oct 15 04:34:34 glynn-desktop kernel: [    1.117317] Freeing unused kernel memory: 244k freed
Oct 15 04:34:34 glynn-desktop kernel: [    1.137259] input: AT Translated Set 2 keyboard as /class/input/input0
Oct 15 04:34:34 glynn-desktop kernel: [    1.204746] ACPI: ACPI0007:00 is registered as cooling_device0
Oct 15 04:34:34 glynn-desktop kernel: [    1.864199] usbcore: registered new interface driver usbfs
Oct 15 04:34:34 glynn-desktop kernel: [    1.864255] usbcore: registered new interface driver hub
Oct 15 04:34:34 glynn-desktop kernel: [    1.864332] usbcore: registered new device driver usb
Oct 15 04:34:34 glynn-desktop kernel: [    1.865188] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 15 04:34:34 glynn-desktop kernel: [    1.865552] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Oct 15 04:34:34 glynn-desktop kernel: [    1.865585] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
Oct 15 04:34:34 glynn-desktop kernel: [    1.865668] PCI: Setting latency timer of device 0000:00:0b.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    1.865671] ohci_hcd 0000:00:0b.0: OHCI Host Controller
Oct 15 04:34:34 glynn-desktop kernel: [    1.865824] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
Oct 15 04:34:34 glynn-desktop kernel: [    1.865869] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xf4105000
Oct 15 04:34:34 glynn-desktop kernel: [    1.903709] Uniform Multi-Platform E-IDE driver
Oct 15 04:34:34 glynn-desktop kernel: [    1.903744] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 15 04:34:34 glynn-desktop kernel: [    1.922108] usb usb1: configuration #1 chosen from 1 choice
Oct 15 04:34:34 glynn-desktop kernel: [    1.922163] hub 1-0:1.0: USB hub found
Oct 15 04:34:34 glynn-desktop kernel: [    1.922198] hub 1-0:1.0: 8 ports detected
Oct 15 04:34:34 glynn-desktop kernel: [    2.024146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Oct 15 04:34:34 glynn-desktop kernel: [    2.024180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 15 04:34:34 glynn-desktop kernel: [    2.024210] usb usb1: Product: OHCI Host Controller
Oct 15 04:34:34 glynn-desktop kernel: [    2.024237] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
Oct 15 04:34:34 glynn-desktop kernel: [    2.024265] usb usb1: SerialNumber: 0000:00:0b.0
Oct 15 04:34:34 glynn-desktop kernel: [    2.025364] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Oct 15 04:34:34 glynn-desktop kernel: [    2.025395] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
Oct 15 04:34:34 glynn-desktop kernel: [    2.025479] PCI: Setting latency timer of device 0000:00:0b.1 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    2.025482] ehci_hcd 0000:00:0b.1: EHCI Host Controller
Oct 15 04:34:34 glynn-desktop kernel: [    2.025528] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
Oct 15 04:34:34 glynn-desktop kernel: [    2.025582] ehci_hcd 0000:00:0b.1: debug port 1
Oct 15 04:34:34 glynn-desktop kernel: [    2.025611] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
Oct 15 04:34:34 glynn-desktop kernel: [    2.025623] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xf4106000
Oct 15 04:34:34 glynn-desktop kernel: [    2.036036] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 15 04:34:34 glynn-desktop kernel: [    2.036149] usb usb2: configuration #1 chosen from 1 choice
Oct 15 04:34:34 glynn-desktop kernel: [    2.036198] hub 2-0:1.0: USB hub found
Oct 15 04:34:34 glynn-desktop kernel: [    2.036230] hub 2-0:1.0: 8 ports detected
Oct 15 04:34:34 glynn-desktop kernel: [    2.111164] Floppy drive(s): fd0 is 1.44M
Oct 15 04:34:34 glynn-desktop kernel: [    2.131762] FDC 0 is a post-1991 82077
Oct 15 04:34:34 glynn-desktop kernel: [    2.140137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Oct 15 04:34:34 glynn-desktop kernel: [    2.140170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 15 04:34:34 glynn-desktop kernel: [    2.140201] usb usb2: Product: EHCI Host Controller
Oct 15 04:34:34 glynn-desktop kernel: [    2.140228] usb usb2: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
Oct 15 04:34:34 glynn-desktop kernel: [    2.140256] usb usb2: SerialNumber: 0000:00:0b.1
Oct 15 04:34:34 glynn-desktop kernel: [    2.140496] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
Oct 15 04:34:34 glynn-desktop kernel: [    2.140872] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
Oct 15 04:34:34 glynn-desktop kernel: [    2.140903] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
Oct 15 04:34:34 glynn-desktop kernel: [    2.140982] PCI: Setting latency timer of device 0000:00:14.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    2.660745] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:3e:7b:12
Oct 15 04:34:34 glynn-desktop kernel: [    2.660781] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
Oct 15 04:34:34 glynn-desktop kernel: [    2.663165] No dock devices found.
Oct 15 04:34:34 glynn-desktop kernel: [    2.669018] SCSI subsystem initialized
Oct 15 04:34:34 glynn-desktop kernel: [    2.675604] libata version 3.00 loaded.
Oct 15 04:34:34 glynn-desktop kernel: [    2.678693] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Oct 15 04:34:34 glynn-desktop kernel: [    2.678729] ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
Oct 15 04:34:34 glynn-desktop kernel: [    2.731553] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[f4000000-f40007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Oct 15 04:34:34 glynn-desktop kernel: [    2.736665] usb 1-2: new full speed USB device using ohci_hcd and address 2
Oct 15 04:34:34 glynn-desktop kernel: [    2.737672] sata_nv 0000:00:0e.0: version 3.5
Oct 15 04:34:34 glynn-desktop kernel: [    2.738000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
Oct 15 04:34:34 glynn-desktop kernel: [    2.738031] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
Oct 15 04:34:34 glynn-desktop kernel: [    2.738122] sata_nv 0000:00:0e.0: Using SWNCQ mode
Oct 15 04:34:34 glynn-desktop kernel: [    2.738185] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    2.738320] scsi0 : sata_nv
Oct 15 04:34:34 glynn-desktop kernel: [    2.738434] scsi1 : sata_nv
Oct 15 04:34:34 glynn-desktop kernel: [    2.738582] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 20
Oct 15 04:34:34 glynn-desktop kernel: [    2.738611] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 20
Oct 15 04:34:34 glynn-desktop kernel: [    2.940012] usb 1-2: configuration #1 chosen from 1 choice
Oct 15 04:34:34 glynn-desktop kernel: [    2.948284] usb 1-2: New USB device found, idVendor=04f9, idProduct=01d6
Oct 15 04:34:34 glynn-desktop kernel: [    2.948317] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
Oct 15 04:34:34 glynn-desktop kernel: [    2.948346] usb 1-2: SerialNumber: BROF8F861057
Oct 15 04:34:34 glynn-desktop kernel: [    2.994038] Initializing USB Mass Storage driver...
Oct 15 04:34:34 glynn-desktop kernel: [    2.994186] scsi2 : SCSI emulation for USB Mass Storage devices
Oct 15 04:34:34 glynn-desktop kernel: [    2.994287] usbcore: registered new interface driver usb-storage
Oct 15 04:34:34 glynn-desktop kernel: [    2.994316] USB Mass Storage support registered.
Oct 15 04:34:34 glynn-desktop kernel: [    2.995778] usb-storage: device found at 2
Oct 15 04:34:34 glynn-desktop kernel: [    2.995782] usb-storage: waiting for device to settle before scanning
Oct 15 04:34:34 glynn-desktop kernel: [    3.616049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 15 04:34:34 glynn-desktop kernel: [    3.624314] ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
Oct 15 04:34:34 glynn-desktop kernel: [    3.624343] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Oct 15 04:34:34 glynn-desktop kernel: [    3.640296] ata1.00: configured for UDMA/133
Oct 15 04:34:34 glynn-desktop kernel: [    4.008123] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00001485003b0892]
Oct 15 04:34:34 glynn-desktop kernel: [    4.374461] ata2: SATA link down (SStatus 0 SControl 300)
Oct 15 04:34:34 glynn-desktop kernel: [    4.374590] scsi 0:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
Oct 15 04:34:34 glynn-desktop kernel: [    4.375720] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
Oct 15 04:34:34 glynn-desktop kernel: [    4.375749] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
Oct 15 04:34:34 glynn-desktop kernel: [    4.375826] sata_nv 0000:00:0f.0: Using SWNCQ mode
Oct 15 04:34:34 glynn-desktop kernel: [    4.375894] PCI: Setting latency timer of device 0000:00:0f.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [    4.378480] scsi3 : sata_nv
Oct 15 04:34:34 glynn-desktop kernel: [    4.378573] scsi4 : sata_nv
Oct 15 04:34:34 glynn-desktop kernel: [    4.378721] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 23
Oct 15 04:34:34 glynn-desktop kernel: [    4.378750] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 23
Oct 15 04:34:34 glynn-desktop kernel: [    5.256047] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 15 04:34:34 glynn-desktop kernel: [    5.264354] ata3.00: ATA-7: Maxtor 6Y200M0, YAR51HW0, max UDMA/133
Oct 15 04:34:34 glynn-desktop kernel: [    5.264383] ata3.00: 398297088 sectors, multi 0: LBA48 
Oct 15 04:34:34 glynn-desktop kernel: [    5.280367] ata3.00: configured for UDMA/133
Oct 15 04:34:34 glynn-desktop kernel: [    6.014458] ata4: SATA link down (SStatus 0 SControl 300)
Oct 15 04:34:34 glynn-desktop kernel: [    6.014567] scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6Y200M0   YAR5 PQ: 0 ANSI: 5
Oct 15 04:34:34 glynn-desktop kernel: [    6.014599] ata3.00: Disabling SWNCQ mode (depth 1)
Oct 15 04:34:34 glynn-desktop kernel: [    6.019285] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
Oct 15 04:34:34 glynn-desktop kernel: [    6.019316] NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xa1) at  PCI slot 0000:00:0d.0
Oct 15 04:34:34 glynn-desktop kernel: [    6.019364] NFORCE-MCP51: not 100% native mode: will probe irqs later
Oct 15 04:34:34 glynn-desktop kernel: [    6.019394] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
Oct 15 04:34:34 glynn-desktop kernel: [    6.019431]     ide0: BM-DMA at 0xf000-0xf007
Oct 15 04:34:34 glynn-desktop kernel: [    6.019463]     ide1: BM-DMA at 0xf008-0xf00f
Oct 15 04:34:34 glynn-desktop kernel: [    6.019491] Probing IDE interface ide0...
Oct 15 04:34:34 glynn-desktop kernel: [    6.752123] hda: ATAPI DVD+/-R/RW16XMAX, ATAPI CD/DVD-ROM drive
Oct 15 04:34:34 glynn-desktop kernel: [    7.536119] hdb: ATAPI DVD-ROM 16XMax, ATAPI CD/DVD-ROM drive
Oct 15 04:34:34 glynn-desktop kernel: [    7.592052] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Oct 15 04:34:34 glynn-desktop kernel: [    7.592484] hda: UDMA/33 mode selected
Oct 15 04:34:34 glynn-desktop kernel: [    7.592863] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Oct 15 04:34:34 glynn-desktop kernel: [    7.592943] hdb: UDMA/33 mode selected
Oct 15 04:34:34 glynn-desktop kernel: [    7.593063] Probing IDE interface ide1...
Oct 15 04:34:34 glynn-desktop kernel: [    7.880121] hdc: Maxtor 6Y200P0, ATA DISK drive
Oct 15 04:34:34 glynn-desktop kernel: [    7.993088] usb-storage: device scan complete
Oct 15 04:34:34 glynn-desktop kernel: [    8.012011] scsi 2:0:0:0: Direct-Access     Brother  MFC-260C         1.00 PQ: 0 ANSI: 2
Oct 15 04:34:34 glynn-desktop kernel: [    8.030521] Driver 'sd' needs updating - please use bus_type methods
Oct 15 04:34:34 glynn-desktop kernel: [    8.030652] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Oct 15 04:34:34 glynn-desktop kernel: [    8.030702] sd 0:0:0:0: [sda] Write Protect is off
Oct 15 04:34:34 glynn-desktop kernel: [    8.030730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 15 04:34:34 glynn-desktop kernel: [    8.030769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 04:34:34 glynn-desktop kernel: [    8.030863] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Oct 15 04:34:34 glynn-desktop kernel: [    8.030910] sd 0:0:0:0: [sda] Write Protect is off
Oct 15 04:34:34 glynn-desktop kernel: [    8.030938] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 15 04:34:34 glynn-desktop kernel: [    8.030976] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 04:34:34 glynn-desktop kernel: [    8.031009]  sda: sda1
Oct 15 04:34:34 glynn-desktop kernel: [    8.052893] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 15 04:34:34 glynn-desktop kernel: [    8.052893] sd 3:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
Oct 15 04:34:34 glynn-desktop kernel: [    8.052893] sd 3:0:0:0: [sdb] Write Protect is off
Oct 15 04:34:34 glynn-desktop kernel: [    8.052893] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Oct 15 04:34:34 glynn-desktop kernel: [    8.052893] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 04:34:34 glynn-desktop kernel: [    8.052893] sd 3:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
Oct 15 04:34:34 glynn-desktop kernel: [    8.052893] sd 3:0:0:0: [sdb] Write Protect is off
Oct 15 04:34:34 glynn-desktop kernel: [    8.052893] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Oct 15 04:34:34 glynn-desktop kernel: [    8.052893] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 15 04:34:34 glynn-desktop kernel: [    8.052893]  sdb: sdb1
Oct 15 04:34:34 glynn-desktop kernel: [    8.060441] sd 3:0:0:0: [sdb] Attached SCSI disk
Oct 15 04:34:34 glynn-desktop kernel: [    8.082037] sd 2:0:0:0: [sdc] Attached SCSI removable disk
Oct 15 04:34:34 glynn-desktop kernel: [    8.552058] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Oct 15 04:34:34 glynn-desktop kernel: [    8.552177] hdc: UDMA/133 mode selected
Oct 15 04:34:34 glynn-desktop kernel: [    8.552328] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 15 04:34:34 glynn-desktop kernel: [    8.554282] ide1 at 0x170-0x177,0x376 on irq 15
Oct 15 04:34:34 glynn-desktop kernel: [    8.636712] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Oct 15 04:34:34 glynn-desktop kernel: [    8.636881] Uniform CD-ROM driver Revision: 3.20
Oct 15 04:34:34 glynn-desktop kernel: [    8.647495] hdb: ATAPI 40X DVD-ROM drive, 512kB Cache
Oct 15 04:34:34 glynn-desktop kernel: [    8.669467] hdc: max request size: 512KiB
Oct 15 04:34:34 glynn-desktop kernel: [    8.671005] hdc: Host Protected Area detected.
Oct 15 04:34:34 glynn-desktop kernel: [    8.671006] 	current capacity is 398294975 sectors (203927 MB)
Oct 15 04:34:34 glynn-desktop kernel: [    8.671007] 	native  capacity is 398297088 sectors (203928 MB)
Oct 15 04:34:34 glynn-desktop kernel: [    8.691330] hdc: Host Protected Area disabled.
Oct 15 04:34:34 glynn-desktop kernel: [    8.691330] hdc: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63
Oct 15 04:34:34 glynn-desktop kernel: [    8.691330] hdc: cache flushes supported
Oct 15 04:34:34 glynn-desktop kernel: [    8.691330]  hdc: hdc1 hdc2 < hdc5 hdc6 >
Oct 15 04:34:34 glynn-desktop kernel: [    9.113329] PM: Starting manual resume from disk
Oct 15 04:34:34 glynn-desktop kernel: [    9.127678] EXT3-fs: INFO: recovery required on readonly filesystem.
Oct 15 04:34:34 glynn-desktop kernel: [    9.127712] EXT3-fs: write access will be enabled during recovery.
Oct 15 04:34:34 glynn-desktop kernel: [    9.256391] kjournald starting.  Commit interval 5 seconds
Oct 15 04:34:34 glynn-desktop kernel: [    9.256391] EXT3-fs: recovery complete.
Oct 15 04:34:34 glynn-desktop kernel: [    9.256391] EXT3-fs: mounted filesystem with ordered data mode.
Oct 15 04:34:34 glynn-desktop kernel: [   10.572825] udevd version 125 started
Oct 15 04:34:34 glynn-desktop kernel: [   11.839338] input: Power Button (FF) as /class/input/input1
Oct 15 04:34:34 glynn-desktop kernel: [   11.864597] ACPI: Power Button (FF) [PWRF]
Oct 15 04:34:34 glynn-desktop kernel: [   11.864690] input: Power Button (CM) as /class/input/input2
Oct 15 04:34:34 glynn-desktop kernel: [   11.897690] ACPI: Power Button (CM) [PWRB]
Oct 15 04:34:34 glynn-desktop kernel: [   12.620060] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
Oct 15 04:34:34 glynn-desktop kernel: [   12.620105] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
Oct 15 04:34:34 glynn-desktop kernel: [   12.670408] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01D6
Oct 15 04:34:34 glynn-desktop kernel: [   12.670459] usbcore: registered new interface driver usblp
Oct 15 04:34:34 glynn-desktop kernel: [   12.984261] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
Oct 15 04:34:34 glynn-desktop kernel: [   12.984295] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
Oct 15 04:34:34 glynn-desktop kernel: [   12.984386] PCI: Setting latency timer of device 0000:00:10.1 to 64
Oct 15 04:34:34 glynn-desktop kernel: [   13.203149] input: PC Speaker as /class/input/input3
Oct 15 04:34:34 glynn-desktop kernel: [   13.358641] logips2pp: Detected unknown logitech mouse model 62
Oct 15 04:34:34 glynn-desktop kernel: [   13.844051] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input4
Oct 15 04:34:34 glynn-desktop kernel: [   13.844051] parport_pc 00:09: reported by Plug and Play ACPI
Oct 15 04:34:34 glynn-desktop kernel: [   13.844051] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Oct 15 04:34:34 glynn-desktop kernel: [   14.572525] Adding 4112600k swap on /dev/hdc5.  Priority:-1 extents:1 across:4112600k
Oct 15 04:34:34 glynn-desktop kernel: [   14.979161] EXT3 FS on hdc6, internal journal
Oct 15 04:34:34 glynn-desktop kernel: [   15.253233] loop: module loaded
Oct 15 04:34:34 glynn-desktop kernel: [   22.338122] NET: Registered protocol family 10
Oct 15 04:34:34 glynn-desktop kernel: [   22.338507] lo: Disabled Privacy Extensions
Oct 15 04:34:34 glynn-desktop kernel: [   31.869854] Linux agpgart interface v0.103
Oct 15 04:34:34 glynn-desktop kernel: [   31.877807] [drm] Initialized drm 1.1.0 20060810
Oct 15 04:34:34 glynn-desktop kernel: [   31.891693] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
Oct 15 04:34:34 glynn-desktop kernel: [   31.891701] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
Oct 15 04:34:34 glynn-desktop kernel: [   31.891706] PCI: Setting latency timer of device 0000:02:00.0 to 64
Oct 15 04:34:34 glynn-desktop kernel: [   31.891765] [drm] Initialized radeon 1.29.0 20080528 on minor 0
Oct 15 04:34:34 glynn-desktop kernel: [   32.192699] [drm] Setting GART location based on new memory map
Oct 15 04:34:34 glynn-desktop kernel: [   32.192922] [drm] Loading R500 Microcode
Oct 15 04:34:34 glynn-desktop kernel: [   32.192942] [drm] Num pipes: 3
Oct 15 04:34:34 glynn-desktop kernel: [   32.192949] [drm] writeback test succeeded in 1 usecs
Oct 15 04:34:34 glynn-desktop kernel: [   32.796020] eth0: no IPv6 routers present
Oct 15 04:34:34 glynn-desktop kernel: [ 8076.390081] [drm] Num pipes: 3
Oct 15 04:34:34 glynn-desktop kernel: [ 8106.490090] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)
Oct 15 04:34:34 glynn-desktop kernel: [ 8106.490121] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6
Oct 15 04:34:34 glynn-desktop kernel: [ 8106.490123] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
Oct 15 04:34:34 glynn-desktop rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="2890" x-info="http://www.rsyslog.com";] restart
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: Found user 'avahi' (UID 104) and group 'avahi' (GID 109).
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: Successfully dropped root privileges.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: avahi-daemon 0.6.23 starting up.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: Successfully called chroot().
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: Successfully dropped remaining capabilities.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: No service file found in /etc/avahi/services.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::214:85ff:fe3e:7b12.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: New relevant interface eth0.IPv6 for mDNS.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.8.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: New relevant interface eth0.IPv4 for mDNS.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: Network interface enumeration completed.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: Registering new address record for fe80::214:85ff:fe3e:7b12 on eth0.*.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: Registering new address record for 192.168.0.8 on eth0.IPv4.
Oct 15 04:34:34 glynn-desktop avahi-daemon[2923]: Registering HINFO record with values 'I686'/'LINUX'.
Oct 15 04:34:34 glynn-desktop kernel: [ 8106.854920] lp0: using parport0 (interrupt-driven).
Oct 15 04:34:34 glynn-desktop kernel: [ 8106.866439] ppdev: user-space parallel port driver
Oct 15 04:34:35 glynn-desktop avahi-daemon[2923]: Server startup complete. Host name is glynn-desktop.local. Local service cookie is 4228309272.
Oct 15 04:34:35 glynn-desktop rpc.statd[3228]: Version 1.1.2 Starting
Oct 15 04:34:35 glynn-desktop rpc.statd[3228]: unable to register (statd, 1, udp).

--===============2145214822==
Content-Type: text/x-c++; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="dmesg"

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-19) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 06:06:52 UTC 2009
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 1151MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at [c00f5240] 000f5240
[    0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   524272
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   524272
[    0.000000] On node 0 totalpages: 524272
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2304 pages used for memmap
[    0.000000]   HighMem zone: 292592 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP 000F6BF0, 0014 (r0 GBT   )
[    0.000000] ACPI: RSDT 7FFF3000, 0030 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: FACP 7FFF3040, 0074 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: DSDT 7FFF30C0, 4D95 (r1 GBT    AWRDACPI     1000 MSFT  100000C)
[    0.000000] ACPI: FACS 7FFF0000, 0040
[    0.000000] ACPI: MCFG 7FFF7F00, 003C (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: APIC 7FFF7E80, 0072 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520176
[    0.000000] Kernel command line: root=/dev/hdc6 ro single
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2210.089 MHz processor.
[    0.004000] spurious 8259A interrupt: IRQ7.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 2069176k/2097088k available (1770k kernel code, 26620k reserved, 751k data, 244k init, 1179584k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
[    0.004000]       .data : 0xc02ba9a9 - 0xc0376620   ( 751 kB)
[    0.004000]       .text : 0xc0100000 - 0xc02ba9a9   (1770 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.084069] Calibrating delay using timer specific routine.. 4424.38 BogoMIPS (lpj=8848769)
[    0.084153] Security Framework initialized
[    0.084184] SELinux:  Disabled at boot.
[    0.084212] Capability LSM initialized
[    0.084251] Mount-cache hash table entries: 512
[    0.084404] Initializing cgroup subsys ns
[    0.084433] Initializing cgroup subsys cpuacct
[    0.084461] Initializing cgroup subsys devices
[    0.084503] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.084532] CPU: L2 Cache: 512K (64 bytes/line)
[    0.084561] Intel machine check architecture supported.
[    0.084589] Intel machine check reporting enabled on CPU#0.
[    0.084625] Checking 'hlt' instruction... OK.
[    0.100275] SMP alternatives: switching to UP code
[    0.105653] ACPI: Core revision 20080321
[    0.113679] ENABLING IO-APIC IRQs
[    0.113911] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.157630] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[    0.160010] Brought up 1 CPUs
[    0.160010] Total of 1 processors activated (4424.38 BogoMIPS).
[    0.160010] CPU0 attaching sched-domain:
[    0.160010]  domain 0: span 0
[    0.160010]   groups: 0
[    0.160010] net_namespace: 660 bytes
[    0.160010] Booting paravirtualized kernel on bare hardware
[    0.160010] NET: Registered protocol family 16
[    0.160010] ACPI: bus type pci registered
[    0.160010] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
[    0.160010] PCI: MCFG area at f0000000 reserved in E820
[    0.160010] PCI: Using MMCONFIG for extended config space
[    0.160010] PCI: Using configuration type 1 for base access
[    0.160010] Setting up standard PCI resources
[    0.160598] ACPI: EC: Look up EC in DSDT
[    0.164229] ACPI Error (dsobject-0501): Package List length (6) larger than NumElements count (2), truncated
[    0.164286]  [20080321]
[    0.167375] ACPI: Interpreter enabled
[    0.167403] ACPI: (supports S0 S1 S4 S5)
[    0.167529] ACPI: Using IOAPIC for interrupt routing
[    0.176203] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.177273] PCI: Transparent bridge - 0000:00:10.0
[    0.177316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.177617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.265129] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.265570] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.266009] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
[    0.266399] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.266837] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
[    0.267228] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.267665] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.268110] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.268550] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[    0.268940] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.269378] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[    0.269770] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.270209] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[    0.270599] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.271037] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.271476] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[    0.271870] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[    0.272263] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.272704] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.273099] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[    0.273527] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.273858] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.274188] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[    0.274495] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.274825] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[    0.275132] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.275462] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.275793] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.276132] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.276508] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    0.276906] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.277282] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[    0.277681] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.278080] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.278456] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    0.278855] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.279230] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.279608] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.280007] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.280408] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.280784] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.281100] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.281151] pnp: PnP ACPI init
[    0.281182] ACPI: bus type pnp registered
[    0.286151] pnp: PnP ACPI: found 13 devices
[    0.286181] ACPI: ACPI bus type pnp unregistered
[    0.286210] PnPBIOS: Disabled by ACPI PNP
[    0.286413] PCI: Using ACPI for IRQ routing
[    0.286628] ACPI: RTC can wake from S4
[    0.286673] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.286702] system 00:01: ioport range 0x1080-0x10ff has been reserved
[    0.286731] system 00:01: ioport range 0x1400-0x147f has been reserved
[    0.286762] system 00:01: ioport range 0x1480-0x14ff has been reserved
[    0.286791] system 00:01: ioport range 0x1800-0x187f has been reserved
[    0.286819] system 00:01: ioport range 0x1880-0x18ff has been reserved
[    0.286848] system 00:01: ioport range 0x2000-0x207f has been reserved
[    0.286877] system 00:01: ioport range 0x2080-0x20ff has been reserved
[    0.286907] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
[    0.286939] system 00:01: iomem range 0xf0000000-0xf1ffffff could not be reserved
[    0.287638] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.287667] system 00:02: ioport range 0x290-0x29f has been reserved
[    0.287703] system 00:0c: iomem range 0xcf800-0xcffff has been reserved
[    0.287732] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[    0.287761] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[    0.287790] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[    0.287820] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved
[    0.287851] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
[    0.287882] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.287911] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
[    0.287942] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.287974] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.318308] PCI: Bridge: 0000:00:02.0
[    0.318336]   IO window: 7000-7fff
[    0.318364]   MEM window: disabled.
[    0.318391]   PREFETCH window: disabled.
[    0.318418] PCI: Bridge: 0000:00:03.0
[    0.318445]   IO window: 8000-8fff
[    0.318472]   MEM window: disabled.
[    0.318499]   PREFETCH window: disabled.
[    0.318529] PCI: Bridge: 0000:00:04.0
[    0.318556]   IO window: a000-afff
[    0.318583]   MEM window: 0xf2000000-0xf3ffffff
[    0.318612]   PREFETCH window: 0x00000000e0000000-0x00000000efffffff
[    0.318641] PCI: Bridge: 0000:00:10.0
[    0.318668]   IO window: 9000-9fff
[    0.318696]   MEM window: 0xf4000000-0xf40fffff
[    0.318724]   PREFETCH window: disabled.
[    0.318761] PCI: Setting latency timer of device 0000:00:02.0 to 64
[    0.318767] PCI: Setting latency timer of device 0000:00:03.0 to 64
[    0.318773] PCI: Setting latency timer of device 0000:00:04.0 to 64
[    0.318780] PCI: Setting latency timer of device 0000:00:10.0 to 64
[    0.318808] NET: Registered protocol family 2
[    0.318909] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.319182] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.319913] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.320043] Switched to high resolution mode on CPU 0
[    0.320360] TCP: Hash tables configured (established 131072 bind 65536)
[    0.320389] TCP reno registered
[    0.320524] NET: Registered protocol family 1
[    0.320648] checking if image is initramfs... it is
[    0.753042] Freeing initrd memory: 6069k freed
[    0.753742] audit: initializing netlink socket (disabled)
[    0.753780] type=2000 audit(1255646445.752:1): initialized
[    0.753995] highmem bounce pool size: 64 pages
[    0.754024] Total HugeTLB memory allocated, 0
[    0.754141] VFS: Disk quotas dquot_6.5.1
[    0.754190] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.754251] msgmni has been set to 1751
[    0.754382] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.754414] io scheduler noop registered
[    0.754441] io scheduler anticipatory registered
[    0.754468] io scheduler deadline registered
[    0.754507] io scheduler cfq registered (default)
[    0.754545] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.754601] pci 0000:00:02.0: Enabling HT MSI Mapping
[    0.754635] pci 0000:00:03.0: Enabling HT MSI Mapping
[    0.754670] pci 0000:00:04.0: Enabling HT MSI Mapping
[    0.754717] pci 0000:00:09.0: Enabling HT MSI Mapping
[    0.754798] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.754834] pci 0000:00:0f.0: Enabling HT MSI Mapping
[    0.754868] pci 0000:00:10.0: Enabling HT MSI Mapping
[    0.754905] pci 0000:00:10.1: Enabling HT MSI Mapping
[    0.754944] pci 0000:02:00.0: Boot video device
[    0.755054] PCI: Setting latency timer of device 0000:00:02.0 to 64
[    0.755074] assign_interrupt_mode Found MSI capability
[    0.755118] Allocate Port Service[0000:00:02.0:pcie00]
[    0.755158] Allocate Port Service[0000:00:02.0:pcie03]
[    0.755217] PCI: Setting latency timer of device 0000:00:03.0 to 64
[    0.755236] assign_interrupt_mode Found MSI capability
[    0.755277] Allocate Port Service[0000:00:03.0:pcie00]
[    0.755313] Allocate Port Service[0000:00:03.0:pcie03]
[    0.755370] PCI: Setting latency timer of device 0000:00:04.0 to 64
[    0.755389] assign_interrupt_mode Found MSI capability
[    0.755430] Allocate Port Service[0000:00:04.0:pcie00]
[    0.755466] Allocate Port Service[0000:00:04.0:pcie03]
[    0.755742] isapnp: Scanning for PnP cards...
[    1.108902] isapnp: No Plug & Play device found
[    1.111362] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.111516] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.111917] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.113330] brd: module loaded
[    1.113441] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.116300] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.116333] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.116505] mice: PS/2 mouse device common for all mice
[    1.116650] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.116697] rtc0: alarms up to one year, y3k
[    1.116756] cpuidle: using governor ladder
[    1.116783] cpuidle: using governor menu
[    1.116813] No iBFT detected.
[    1.117181] TCP cubic registered
[    1.117209] NET: Registered protocol family 17
[    1.117239] Using IPI No-Shortcut mode
[    1.117375] registered taskstats version 1
[    1.117547] rtc_cmos 00:04: setting system clock to 2009-10-15 22:40:46 UTC (1255646446)
[    1.117736] Freeing unused kernel memory: 244k freed
[    1.137664] input: AT Translated Set 2 keyboard as /class/input/input0
[    1.205855] ACPI: ACPI0007:00 is registered as cooling_device0
[    1.863051] usbcore: registered new interface driver usbfs
[    1.863107] usbcore: registered new interface driver hub
[    1.863183] usbcore: registered new device driver usb
[    1.864413] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.864779] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    1.864814] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
[    1.864898] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    1.864901] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[    1.865053] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[    1.865100] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xf4105000
[    1.902371] Uniform Multi-Platform E-IDE driver
[    1.902406] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.922113] usb usb1: configuration #1 chosen from 1 choice
[    1.922169] hub 1-0:1.0: USB hub found
[    1.922204] hub 1-0:1.0: 8 ports detected
[    2.024146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.024179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.024210] usb usb1: Product: OHCI Host Controller
[    2.024237] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[    2.024265] usb usb1: SerialNumber: 0000:00:0b.0
[    2.025465] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    2.025497] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
[    2.025581] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[    2.025584] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[    2.025632] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[    2.025685] ehci_hcd 0000:00:0b.1: debug port 1
[    2.025715] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[    2.025726] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xf4106000
[    2.036037] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.036150] usb usb2: configuration #1 chosen from 1 choice
[    2.036199] hub 2-0:1.0: USB hub found
[    2.036232] hub 2-0:1.0: 8 ports detected
[    2.110348] Floppy drive(s): fd0 is 1.44M
[    2.127720] FDC 0 is a post-1991 82077
[    2.140116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.140149] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.140180] usb usb2: Product: EHCI Host Controller
[    2.140207] usb usb2: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[    2.140235] usb usb2: SerialNumber: 0000:00:0b.1
[    2.140470] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    2.140847] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[    2.140878] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
[    2.140957] PCI: Setting latency timer of device 0000:00:14.0 to 64
[    2.660745] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:3e:7b:12
[    2.660781] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
[    2.663175] No dock devices found.
[    2.669021] SCSI subsystem initialized
[    2.675601] libata version 3.00 loaded.
[    2.679629] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    2.679666] ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[    2.732500] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[f4000000-f40007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.737541] sata_nv 0000:00:0e.0: version 3.5
[    2.737839] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[    2.737869] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[    2.737946] sata_nv 0000:00:0e.0: Using SWNCQ mode
[    2.738005] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    2.738154] scsi0 : sata_nv
[    2.738263] scsi1 : sata_nv
[    2.738414] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 20
[    2.738444] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 20
[    2.738512] usb 1-2: new full speed USB device using ohci_hcd and address 2
[    2.949114] usb 1-2: configuration #1 chosen from 1 choice
[    2.952297] usb 1-2: New USB device found, idVendor=04f9, idProduct=01d6
[    2.952330] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[    2.952359] usb 1-2: SerialNumber: BROF8F861057
[    2.997881] Initializing USB Mass Storage driver...
[    2.998033] scsi2 : SCSI emulation for USB Mass Storage devices
[    2.998136] usbcore: registered new interface driver usb-storage
[    2.998165] USB Mass Storage support registered.
[    2.999614] usb-storage: device found at 2
[    2.999618] usb-storage: waiting for device to settle before scanning
[    3.616049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.624296] ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
[    3.624325] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.632290] ata1.00: configured for UDMA/133
[    4.008121] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00001485003b0892]
[    4.366466] ata2: SATA link down (SStatus 0 SControl 300)
[    4.366595] scsi 0:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
[    4.367730] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[    4.367760] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[    4.367838] sata_nv 0000:00:0f.0: Using SWNCQ mode
[    4.367904] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[    4.370497] scsi3 : sata_nv
[    4.370591] scsi4 : sata_nv
[    4.370740] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 23
[    4.370769] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 23
[    5.248047] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.256359] ata3.00: ATA-7: Maxtor 6Y200M0, YAR51HW0, max UDMA/133
[    5.256388] ata3.00: 398297088 sectors, multi 0: LBA48 
[    5.272371] ata3.00: configured for UDMA/133
[    6.006462] ata4: SATA link down (SStatus 0 SControl 300)
[    6.006572] scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6Y200M0   YAR5 PQ: 0 ANSI: 5
[    6.006605] ata3.00: Disabling SWNCQ mode (depth 1)
[    6.011168] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
[    6.011199] NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xa1) at  PCI slot 0000:00:0d.0
[    6.011248] NFORCE-MCP51: not 100% native mode: will probe irqs later
[    6.011278] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
[    6.011315]     ide0: BM-DMA at 0xf000-0xf007
[    6.011347]     ide1: BM-DMA at 0xf008-0xf00f
[    6.011376] Probing IDE interface ide0...
[    6.744118] hda: ATAPI DVD+/-R/RW16XMAX, ATAPI CD/DVD-ROM drive
[    7.528121] hdb: ATAPI DVD-ROM 16XMax, ATAPI CD/DVD-ROM drive
[    7.584056] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    7.584510] hda: UDMA/33 mode selected
[    7.584889] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    7.584968] hdb: UDMA/33 mode selected
[    7.585088] Probing IDE interface ide1...
[    7.872122] hdc: Maxtor 6Y200P0, ATA DISK drive
[    7.997102] usb-storage: device scan complete
[    8.016011] scsi 2:0:0:0: Direct-Access     Brother  MFC-260C         1.00 PQ: 0 ANSI: 2
[    8.034041] Driver 'sd' needs updating - please use bus_type methods
[    8.034174] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    8.034224] sd 0:0:0:0: [sda] Write Protect is off
[    8.034253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.034293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.034388] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    8.034436] sd 0:0:0:0: [sda] Write Protect is off
[    8.034464] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.034502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.034535]  sda: sda1
[    8.056014] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.056014] sd 3:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
[    8.056014] sd 3:0:0:0: [sdb] Write Protect is off
[    8.056014] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    8.056014] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.056014] sd 3:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
[    8.056014] sd 3:0:0:0: [sdb] Write Protect is off
[    8.056014] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    8.056014] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.056014]  sdb: sdb1
[    8.056014] sd 3:0:0:0: [sdb] Attached SCSI disk
[    8.099147] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[    8.544056] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    8.544174] hdc: UDMA/133 mode selected
[    8.544311] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    8.546102] ide1 at 0x170-0x177,0x376 on irq 15
[    8.628775] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[    8.628946] Uniform CD-ROM driver Revision: 3.20
[    8.639450] hdb: ATAPI 40X DVD-ROM drive, 512kB Cache
[    8.659032] hdc: max request size: 512KiB
[    8.660108] hdc: Host Protected Area detected.
[    8.660109] 	current capacity is 398294975 sectors (203927 MB)
[    8.660110] 	native  capacity is 398297088 sectors (203928 MB)
[    8.677642] hdc: Host Protected Area disabled.
[    8.677675] hdc: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63
[    8.677892] hdc: cache flushes supported
[    8.677955]  hdc: hdc1 hdc2 < hdc5 hdc6 >
[    9.117544] PM: Starting manual resume from disk
[    9.166268] kjournald starting.  Commit interval 5 seconds
[    9.166268] EXT3-fs: mounted filesystem with ordered data mode.
[   10.688628] udevd version 125 started
[   11.946102] input: Power Button (FF) as /class/input/input1
[   11.976066] ACPI: Power Button (FF) [PWRF]
[   11.976160] input: Power Button (CM) as /class/input/input2
[   12.003022] ACPI: Power Button (CM) [PWRB]
[   12.723033] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   12.723079] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
[   12.769103] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01D6
[   12.769150] usbcore: registered new interface driver usblp
[   13.114948] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   13.114982] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
[   13.115074] PCI: Setting latency timer of device 0000:00:10.1 to 64
[   13.302777] input: PC Speaker as /class/input/input3
[   13.466479] logips2pp: Detected unknown logitech mouse model 62
[   13.964353] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input4
[   13.969401] parport_pc 00:09: reported by Plug and Play ACPI
[   13.969401] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   14.785987] Adding 4112600k swap on /dev/hdc5.  Priority:-1 extents:1 across:4112600k
[   15.209226] EXT3 FS on hdc6, internal journal
[   15.768437] loop: module loaded

--===============2145214822==--

--- End Message ---

--- Begin Message ---

To: 551158-done@bugs.debian.org

Subject: Re: Libc6: exim4 Segfault in libc-2.7.so

From: Aurelien Jarno <aurelien@aurel32.net>

Date: Thu, 23 Jun 2011 12:35:04 +0200

Message-id: <20110623103504.GA9660@volta.aurel32.net>

In-reply-to: <1263762458.6473.1.camel@nostromo>

References: <1256539295.4646.3.camel@nostromo> <20091110182811.GB13886@volta.aurel32.net> <1259184442.13628.2.camel@nostromo> <20091125222031.GL17477@hall.aurel32.net> <1263762458.6473.1.camel@nostromo>
On Sun, Jan 17, 2010 at 10:07:38PM +0100, Fabio Rosciano wrote:
> Dear Aurelien, dear all,
> 
> for unrelated reasons I had to reinstall my system and now everything
> works fine with the latest libc6.
> I suppose there was some sort of horrible conflict somewhere.
> Hopefully it won't be reproducible anywhere else.
> 
> As far as I'm concerned, case closed.
> 

Given the bug hasn't been reported again in more than one year, I guess
we can close it in the Debian BTS.

-- 
Aurelien Jarno                          GPG: 1024D/F1BCDB73
aurelien@aurel32.net                 http://www.aurel32.net
--- End Message ---

Reply to:

Prev by Date: Bug#552110: marked as done (tzdata: 2009o breaks DST in Bangladesh)
Next by Date: Re: [patches] Track resolv.conf, avoid need for explicit res_init() or nscd in long-running applications
Previous by thread: Bug#552110: marked as done (tzdata: 2009o breaks DST in Bangladesh)
Next by thread: Re: [patches] Track resolv.conf, avoid need for explicit res_init() or nscd in long-running applications
Index(es):
- Date
- Thread