RE: debian, isdn ou comment s'arracher les cheveux
Bien ! Merci Stéphane, c'est devenu beucoup plus lumineux et çà marche pour
http.
Me reste plus qu'à le déclarer routeur
Juste une question l'adresse distante reste à 10.0.0.2 : Est-ce un pb?
-------------------------------------------------------------
Ci dessous mon ipppd.ippp0
# Options file for ipppd.
# ipppd will not read /etc/ppp/options or /etc/ppp/ioptions or any other
# config file. Everything has to be in here.
# "peer" is the name for our syncppp partner.
# STANDARD OPTIONS
debug # enable debugging
#kdebug X # set kernel debugging level to X
#nodetach # (no) fork to the background
#callback X # ask for callback (parameter X ?)
#lock # create a lock file for device
#domain X # add domain X to a given hostname
#pidfile X # save pid in file X
#call X # take options from privileges file (???)
#idle X # idle time limit (seconds)
#holdoff X # holdoff time limit (seconds)
maxconnect 360 # set maximum connection time (in seconds ?)
#+mp # enable multi line ppp
#+pwlog # log password (WARNING: possible security hole)
#nomagic # magic number negotiation
# ppp handshake : tuning
#silent # don't even try to initiate the connection
#passive # wait for the peer to initiate the connection
#lcp-echo-failure X # consecutive echo failures
#lcp-echo-interval X # time for lcp echo events
lcp-restart 1 # Set timeout for LCP
#lcp-max-terminate X # Set max #xmits for term-reqs
#lcp-max-configure X # Set max #xmits for conf-reqs
#lcp-max-failure X # Set max #conf-naks for LCP
# AUTHENTICATION
name fti/hhtcy9y # local name for auth XXX_
#user fti/hhtcy9y # set name for auth with peer; default is value for
name
#usehostname # use hostname for auth
#remotename X # set remote name for auth
noauth # (dont) require peer (the other) to auth
#require-pap # allow only pap authentication (dialin only)
#require-chap # allow only chap authentication (dialin only)
#login # use system password database for pap
#papcrypt # pap passwords are encrypted
# AUTHENTICATION TUNING
#pap-restart X # Set retransmit timeout for PAP
#pap-max-authreq X # Set max #xmits for auth-reqs
#pap-timeout X # Set time limit for peer PAP auth.
#chap-restart X # Set timeout for CHAP
#chap-max-challenge X # Set max #xmits for challenge
#chap-interval X # Set interval for rechallenge
# COMPRESSION
#noaccomp # address compression on/off
#nopcomp # protocol field compression on/off
#novj # van jacobsen compression on/off
#novjccomp # van jacobsen connection-ID compression on/off
#vj-max-slots X # tune maximum vj header slots
#nobsdcomp # bsd compression on/off
#nodeflate # deflate compression on/off
#nopredictor1 # predictor1 compression in/off
#noccp # compression negotation on/off
#nolzs # LZS compression off (not yet supported fully)
# IP NETWORKING
#noip # en/disable ip transfer
#X:Y # set local ip to X, remote ip to Y
#noipdefault # don't use name for default ip addr
useifip # use ip addresses form interface
#usefirstip # use first ip from auth file for remote
netmask 255.255.255.255 # set netmask, 255.255.255.255 is for pointopoint
defaultroute # (dont) set default route
nohostroute # dont set host route
#noproxyarp # (dont) set an proxy arp entry
#mru X # set maximum size of recive units to X
#default-mru # disable mru negotation
mtu 1500 # set maximum size of transmit units to X (1500 is OK)
#useifmtu # use mtu from interface
#ipparam X # set ip parameters in script X
#ms-dns X # dns address for the peers use (dialin only)
#ms-wins X # wins address for the peers use (dialin only)
ms-get-dns # accept peers suggestion of dns address (dialout)
#set_userip # define valid ip addresses in /etc/ppp/useriptab
#ipcp-restart X # Set timeout for IPCP
#ipcp-max-terminate X # Set max #xmits for term-reqs
#ipcp-max-configure X # Set max #xmits for conf-reqs
#ipcp-max-failure X # Set max #conf-naks for IPCP
#ipcp-accept-local # Accept peer's address for us
#ipcp-accept-remote # Accept peer's address for it
# IPX NETWORKING
#noipx # en/disable ipx
#ipx-network X # IPX network number
#ipxcp-accept-network # Accept peer netowrk
#ipx-node X # IPX node number
#ipxcp-accept-local # Accept our address
#ipxcp-accept-remote # Accept peer's address
#ipx-routing X # IPX routing proto number
#ipx-router-name X # IPX router name
#ipxcp-restart X # Set timeout for IPXCP
#ipxcp-max-terminate X # max #xmits for term-reqs
#ipxcp-max-configure X # max #xmits for conf-reqs
#ipxcp-max-failure X # max #conf-naks for IPXCP
Reply to: