Fwd: ADSL PPPOE Configuration
J'avais adressé une question il y a une semaine, concernant la connexion
ADSL. J'ai rassemblé la documentation, j'ai contacté France-Télécom qui a
procédé au passage du protocole pptp au protocole pppoe j'ai essayé avec
Windows ça marche.
Pour l'installation sous linux j'ai récupéré la doc. puis j'ai procédé à
l'installation.
Installation d'un noyau précompilé qui supporte ppp
lancement des modules ppp et deflate
paramétrage de pap-secrets et chap-secrets avec les identifiants fournis par
FT
mdification de dsl-provider
modification de options
paramétrage de la carte eth0
et lorsque je lance /etc/init.d/ppp start
j'obtiens les logs qui figurent ci-après (j'ai retenu la leçon
donné par S.B. en réponse à mon premier mail)
Ca ne marche pas.
quelqu'un a t'il une idée?
Faut-il passer de mode asynchrone à synchrone ? et comment faire ?
Faut-il installer d'autres versions de ppp (2.37)?
Faut-il un autre paramétrage ?
Merci d'avance
Hervé
/var/log/messages
Feb 15 23:24:27 gaelle syslogd 1.3-3#31: restart.
Feb 15 23:24:28 gaelle kernel: klogd 1.3-3#31, log source = /proc/kmsg
started.
Feb 15 23:24:28 gaelle kernel: Inspecting /boot/System.map-2.2.17
Feb 15 23:24:31 gaelle kernel: Loaded 9577 symbols from
/boot/System.map-2.2.17.
Feb 15 23:24:31 gaelle kernel: Symbols match kernel version 2.2.17.
Feb 15 23:24:31 gaelle kernel: Loaded 23 symbols from 4 modules.
Feb 15 23:24:31 gaelle kernel: Linux version 2.2.17 (herbert@arnor) (gcc
version 2.95.2 20000313 (Debian GNU/Linux)) #1 Sun Jun 25 09:24:41 EST 2000
Feb 15 23:24:31 gaelle kernel: Console: colour VGA+ 80x25
Feb 15 23:24:31 gaelle kernel: Calibrating delay loop... 59.80 BogoMIPS
Feb 15 23:24:31 gaelle kernel: Memory: 13484k/16384k available (1732k kernel
code, 412k reserved, 616k data, 140k init)
Feb 15 23:24:31 gaelle kernel: Checking if this processor honours the WP bit
even in supervisor mode... Ok.
Feb 15 23:24:31 gaelle kernel: Dentry hash table entries: 2048 (order 2, 16k)
Feb 15 23:24:31 gaelle kernel: Buffer cache hash table entries: 16384 (order
4, 64k)
Feb 15 23:24:31 gaelle kernel: Page cache hash table entries: 4096 (order 2,
16k)
Feb 15 23:24:31 gaelle kernel: VFS: Diskquotas version dquot_6.4.0
initialized
Feb 15 23:24:31 gaelle kernel: CPU: AMD 486 DX/4 stepping 04
Feb 15 23:24:31 gaelle kernel: Checking 386/387 coupling... OK, FPU using
exception 16 error reporting.
Feb 15 23:24:31 gaelle kernel: Checking 'hlt' instruction... OK.
Feb 15 23:24:31 gaelle kernel: Checking for popad bug... OK.
Feb 15 23:24:31 gaelle kernel: POSIX conformance testing by UNIFIX
Feb 15 23:24:31 gaelle kernel: PCI: No PCI bus detected
Feb 15 23:24:31 gaelle kernel: Linux NET4.0 for Linux 2.2
Feb 15 23:24:31 gaelle kernel: Based upon Swansea University Computer Society
NET3.039
Feb 15 23:24:31 gaelle kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Feb 15 23:24:31 gaelle kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Feb 15 23:24:31 gaelle kernel: TCP: Hash tables configured (ehash 16384 bhash
16384)
Feb 15 23:24:31 gaelle kernel: Starting kswapd v 1.5
Feb 15 23:24:31 gaelle kernel: pty: 256 Unix98 ptys configured
Feb 15 23:24:31 gaelle kernel: apm: BIOS not found.
Feb 15 23:24:31 gaelle kernel: Real Time Clock Driver v1.09
Feb 15 23:24:31 gaelle kernel: RAM disk driver initialized: 16 RAM disks of
4096K size
Feb 15 23:24:31 gaelle kernel: loop: registered device at major 7
Feb 15 23:24:31 gaelle kernel: Keyboard timeout[2]
Feb 15 23:24:31 gaelle kernel: hda: Maxtor 7850 AV, ATA DISK drive
Feb 15 23:24:31 gaelle kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 15 23:24:31 gaelle kernel: hda: Maxtor 7850 AV, 814MB w/64kB Cache,
CHS=827/32/63
Feb 15 23:24:31 gaelle kernel: floppy0: no floppy controllers found
Feb 15 23:24:31 gaelle kernel: md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
Feb 15 23:24:31 gaelle kernel: scsi: <fdomain> Detection failed (no card)
Feb 15 23:24:31 gaelle kernel: NCR53c406a: no available ports found
Feb 15 23:24:31 gaelle kernel: sym53c416.c: Version 1.0.0
Feb 15 23:24:31 gaelle kernel: qlogicisp : PCI not present
Feb 15 23:24:31 gaelle kernel: qlogicfc : PCI not present
Feb 15 23:24:31 gaelle kernel: eata_pio: No BIOS32 extensions present. This
driver release still depends on it.
Feb 15 23:24:31 gaelle kernel: Skipping scan for PCI HBAs.
Feb 15 23:24:31 gaelle kernel: Failed initialization of WD-7000 SCSI card!
Feb 15 23:24:31 gaelle kernel: IBM MCA SCSI: No Microchannel-bus support
present -> Aborting.
Feb 15 23:24:31 gaelle kernel: megaraid: v107 (December 22, 1999)
Feb 15 23:24:31 gaelle kernel: aec671x_detect:
Feb 15 23:24:31 gaelle kernel: NO PCI SUPPORT.
Feb 15 23:24:31 gaelle kernel: 3w-xxxx: tw_scsi_detect(): No pci interface
present.
Feb 15 23:24:31 gaelle kernel: scsi : 0 hosts.
Feb 15 23:24:31 gaelle kernel: scsi : detected total.
Feb 15 23:24:31 gaelle kernel: Partition check:
Feb 15 23:24:31 gaelle kernel: hda: hda1 hda2
Feb 15 23:24:31 gaelle kernel: VFS: Mounted root (ext2 filesystem) readonly.
Feb 15 23:24:31 gaelle kernel: Freeing unused kernel memory: 140k freed
Feb 15 23:24:31 gaelle kernel: NET4: Unix domain sockets 1.0 for Linux
NET4.0.
Feb 15 23:24:31 gaelle kernel: Adding Swap: 116924k swap-space (priority -1)
Feb 15 23:24:31 gaelle kernel: ne.c:v1.10 9/23/94 Donald Becker
(becker@cesdis.gsfc.nasa.gov)
Feb 15 23:24:31 gaelle kernel: NE*000 ethercard probe at 0x240: 00 40 05 e3
02 fc
Feb 15 23:24:31 gaelle kernel: eth0: NE2000 found at 0x240, using IRQ 5.
Feb 15 23:24:31 gaelle kernel: NE*000 ethercard probe at 0x320: 00 40 95 1a
ac c6
Feb 15 23:24:31 gaelle kernel: eth1: NE2000 found at 0x320, using IRQ 11.
Feb 15 23:24:31 gaelle kernel: Serial driver version 4.27 with no serial
options enabled
Feb 15 23:24:35 gaelle kernel: CSLIP: code copyright 1989 Regents of the
University of California
Feb 15 23:24:35 gaelle kernel: PPP: version 2.3.7 (demand dialling)
Feb 15 23:24:35 gaelle kernel: PPP line discipline registered.
Feb 15 23:24:35 gaelle kernel: registered device ppp0
Feb 15 23:24:35 gaelle pppd[215]: pppd 2.3.11 started by root, uid 0
Feb 15 23:24:35 gaelle pppd[215]: Using interface ppp0
Feb 15 23:24:35 gaelle pppd[215]: Connect: ppp0 <--> /dev/pts/0
Feb 15 23:24:46 gaelle papd[241]: restart (1.4b2+asun2.1.3)
Feb 15 23:25:07 gaelle pppd[215]: LCP: timeout sending Config-Requests
Feb 15 23:25:07 gaelle pppd[215]: Connection terminated.
/var/log/syslog
Feb 16 01:19:46 gaelle pppd[671]: Using interface ppp0
Feb 16 01:19:46 gaelle pppd[671]: Connect: ppp0 <--> /dev/pts/0
Feb 16 01:19:46 gaelle pppd[671]: sent [LCP ConfReq id=0x17 <mru 2400>
<asyncmap 0x0> <magic 0x69df6801> <pcomp> <accomp>]
Feb 16 01:19:46 gaelle pppoe[686]: read (asyncReadFromPPP): Input/output
error Feb 16 01:19:46 gaelle pppd[671]: Script pppoe -I eth0 -T 80 finished
(pid 686), status = 0x100
Feb 16 01:19:47 gaelle pppoe[688]: PADS: Service-Name: ''
Feb 16 01:19:47 gaelle pppoe[688]: PPP session is 8106
Feb 16 01:19:47 gaelle pppd[671]: rcvd [LCP ConfReq id=0x88 <mru 1492> <auth
chap MD5> <magic 0x3020f5b>]
Feb 16 01:19:47 gaelle pppd[671]: sent [LCP ConfRej id=0x88 <auth chap MD5>]
Feb 16 01:19:47 gaelle pppd[671]: rcvd [LCP ConfReq id=0x89 <mru 1492> <auth
pap> <magic 0x3020f5b>]
Feb 16 01:19:47 gaelle pppd[671]: sent [LCP ConfRej id=0x89 <auth pap>]
Feb 16 01:19:47 gaelle pppd[671]: rcvd [LCP ConfReq id=0x8a <mru 1492> <magic
0x3020f5b>]
Feb 16 01:19:47 gaelle pppd[671]: sent [LCP ConfAck id=0x8a <mru 1492> <magic
0x3020f5b>]
Feb 16 01:19:49 gaelle pppd[671]: sent [LCP ConfReq id=0x17 <mru 2400>
<asyncmap 0x0> <magic 0x69df6801> <pcomp> <accomp>]
Feb 16 01:19:49 gaelle pppd[671]: rcvd [LCP ConfRej id=0x17 <asyncmap 0x0>
<pcomp> <accomp>]
Feb 16 01:19:49 gaelle pppd[671]: sent [LCP ConfReq id=0x18 <mru 2400> <magic
0x69df6801>]
/var/log/ppp.log
Feb 16 01:19:46 gaelle pppd[671]: LCP: timeout sending Config-Requests
Feb 16 01:19:46 gaelle pppd[671]: Connection terminated.
Feb 16 01:19:46 gaelle pppd[671]: Using interface ppp0
Feb 16 01:19:46 gaelle pppd[671]: Connect: ppp0 <--> /dev/pts/0
Feb 16 01:19:46 gaelle pppd[671]: sent [LCP ConfReq id=0x17 <mru 2400>
<asyncmap 0x0> <magic 0x69df6801> <pcomp> <accomp>]
Feb 16 01:19:46 gaelle pppd[671]: Script pppoe -I eth0 -T 80 finished (pid
686), status = 0x100
Feb 16 01:19:47 gaelle pppd[671]: rcvd [LCP ConfReq id=0x88 <mru 1492> <auth
chap MD5> <magic 0x3020f5b>]
Feb 16 01:19:47 gaelle pppd[671]: sent [LCP ConfRej id=0x88 <auth chap MD5>]
Feb 16 01:19:47 gaelle pppd[671]: rcvd [LCP ConfReq id=0x89 <mru 1492> <auth
pap> <magic 0x3020f5b>]
Feb 16 01:19:47 gaelle pppd[671]: sent [LCP ConfRej id=0x89 <auth pap>]
Feb 16 01:19:47 gaelle pppd[671]: rcvd [LCP ConfReq id=0x8a <mru 1492> <magic
0x3020f5b>]
Feb 16 01:19:47 gaelle pppd[671]: sent [LCP ConfAck id=0x8a <mru 1492> <magic
0x3020f5b>]
Feb 16 01:19:49 gaelle pppd[671]: sent [LCP ConfReq id=0x17 <mru 2400>
<asyncmap 0x0> <magic 0x69df6801> <pcomp> <accomp>]
Feb 16 01:19:49 gaelle pppd[671]: rcvd [LCP ConfRej id=0x17 <asyncmap 0x0>
<pcomp> <accomp>]
Feb 16 01:19:49 gaelle pppd[671]: sent [LCP ConfReq id=0x18 <mru 2400> <magic
0x69df6801>]
--
--
mailto: herve@brunel-ejm.com
Linux, an other way for software
Take a look at: ulice.revolink.com
Reply to: