=?x-unknown?q?Re=3A_Serveru_Netfinity_3500_pb_carte_ethernet?==?x-unknown?q?_int=E9gr=E9e?=
J'ai eu les meme problemes avec ces noyaux testez avec un 2.2.5
Vous n'auriez pas deux cartes rezos sur la machine par hazard ??
Julien
On Thu, 27 Apr 2000, Vincent Morlot wrote:
> Date: Thu, 27 Apr 2000 17:02:14 +0200
> From: Vincent Morlot <Vincent.Morlot@netcourrier.com>
> To: Debian French <debian-french@lists.debian.org>
> Subject: Serveru Netfinity 3500 pb carte ethernet intégrée
> Resent-Date: Thu, 27 Apr 2000 17:12:18 +0200 (CEST)
> Resent-From: debian-french@lists.debian.org
>
> Bonjour,
>
> Nous possédons des serveurs Netfinity 3500 fonctionnant sous
> slink, avec carte ethernet intégrée OEM i8557/i8558 10/100
> Ethernet. Ces machines fonctionnent correctement avec les
> versions de noyaux 2.0.36 ou 2.0.38.
>
> Par contre nous devons installer un gestionnaire de bases de
> données dessus l'une d'elle (db2) qui nécessite la mise en
> place d'un noyau 2.2.X. Or après plusieurs tentatives nous
> n'arrivons pas à faire fonctionner correctement ces machines
> après mises à jour du noyau (essais avec 2.2.10 et 2.2.12).
> Le démarrage s'effectue correctement mais le simple
> lancement d'un apt-get update bloque la machine ou
> simplement un cp sur un répertoire monté via nfs.
>
> Les seuls messages obtenus dans les logs,
>
> eepro100.c:v1.09l 8/7/99 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers
> /eepro100.html
> The PCI BIOS has not enabled this device! Updating PCI
> command 0103->0107.
> eth0: OEM i82557/i82558 10/100 Ethernet at 0xd0046000,
> 00:04:AC:96:E2:4A, IRQ 14
> .
> Board assembly 000002-002, Physical connectors present:
> RJ45
> Primary interface chip i82555 PHY #1.
> General self-test: passed.
> Serial sub-system self-test: passed.
> Internal registers self-test: passed.
> ROM checksum self-test: passed (0x24c9f043).
> Receiver lock-up workaround activated.
> Serial driver version 4.27 with no serial options enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> nfs: server netix not responding, still trying
> nfs: server netix not responding, still trying
> nfs: task 32 can't get a request slot
> eth0: Transmit timed out: status 0050 0070 at 5954/5966
> command 000c0000.
> eth0: Tx ring dump, Tx queue 5966 / 5954:
> eth0: 0 000ca000.
> eth0: 1 000ca000.
> eth0: * 2 000c0000.
> eth0: 3 000ca000.
> eth0: 4 000ca000.
> eth0: 5 000ca000.
> eth0: 6 000ca000.
> eth0: 7 000ca000.
> eth0: 8 000ca000.
> eth0: 9 000ca000.
> eth0: 10 000ca000.
> eth0: 11 000ca000.
> eth0: 12 000ca000.
> eth0: 13 400ca000.
> eth0: =14 000ca000.
> eth0: 15 000ca000.
> eth0: 16 000ca000.
> eth0: 17 000ca000.
> eth0: 18 000ca000.
> eth0: 19 000ca000.
> eth0: 20 000ca000.
> eth0: 21 000ca000.
> eth0: 22 000ca000.
> eth0: 23 000ca000.
> eth0: 24 000ca000.
> eth0: 25 000ca000.
> eth0: 26 000ca000.
> eth0: 27 000ca000.
> eth0: 28 000ca000.
> eth0: 29 000ca000.
> eth0: 30 000ca000.
> eth0: 31 000ca000.
> eth0:Printing Rx ring (next to receive into 8628).
> Rx ring entry 0 00000001.
> Rx ring entry 1 00000001.
> Rx ring entry 2 00000001.
> Rx ring entry 3 00000001.
> Rx ring entry 4 00000001.
> Rx ring entry 5 00000001.
> Rx ring entry 6 00000001.
> Rx ring entry 7 00000001.
> Rx ring entry 8 00000001.
> Rx ring entry 9 00000001.
> Rx ring entry 10 00000001.
> Rx ring entry 11 00000001.
> Rx ring entry 12 00000001.
> Rx ring entry 13 00000001.
> Rx ring entry 14 00000001.
> Rx ring entry 15 00000001.
> Rx ring entry 16 00000001.
> Rx ring entry 17 00000001.
> Rx ring entry 18 00000001.
> Rx ring entry 19 c0000001.
> Rx ring entry 20 00000001.
> Rx ring entry 21 00000001.
> Rx ring entry 22 00000001.
> Rx ring entry 23 00000001.
> Rx ring entry 24 00000001.
> Rx ring entry 25 00000001.
> Rx ring entry 26 00000001.
> Rx ring entry 27 00000001.
> Rx ring entry 28 00000001.
> Rx ring entry 29 00000001.
> Rx ring entry 30 00000001.
> Rx ring entry 31 00000001.
> PHY index 1 register 0 is 3000.
> PHY index 1 register 1 is 782d.
> PHY index 1 register 2 is 02a8.
> PHY index 1 register 3 is 0150.
> PHY index 1 register 4 is 05e1.
> PHY index 1 register 5 is 45e1.
> PHY index 1 register 21 is 0000.
> eth0: Trying to restart the transmitter...
> eth0: Transmit timed out: status 0050 0070 at 9807/9819
> command 000c0000.
> eth0: Tx ring dump, Tx queue 9819 / 9807:
>
> Nous avons fait l'essai sur plusieurs machines, le problème
> est indépendant de la machine.
>
> La machine faisant office de serveur nfs n'est pas en cause,
> elle est accessible depuis les autres machines
>
> Merci
>
>
> --
> To UNSUBSCRIBE, email to debian-french-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
Reply to: