2.2.7 + PCMCIA + SCSI
Bonjour,
Je n'arrive pas à trouver les bonnes options de compilation du noyeau
2.2.7 pour faire fonctionner ma carte PCMCIA SCSI.
J'ai positionné toutes les options CONFIG_SCSI,
CONFIG_BLK_DEV_(SD|ST|SR|SR_VENDOR|SG), j'ai construit un paquetage
.deb du noyeau avec make-kpkg, j'ai construit un pcmcia_modules*.deb
avec make-kpkg. Après installation, la carte réseau marche et pas la
carte SCSI. (Les 2 fonctionnent bien avec le 2.0.36 de Debian 2.1,
mais là j'ai pas d'APM.)
Quelqu'un aurait-il une idée sur ce que je devrais faire ?
D'avance merci,
--Nabil
May 25 10:52:43 erss-hathout kernel: Linux PCMCIA Card Services 3.0.9
May 25 10:52:43 erss-hathout kernel: kernel build: 2.2.7 unknown
May 25 10:52:43 erss-hathout kernel: options: [pci] [cardbus] [apm]
May 25 10:52:43 erss-hathout kernel: Intel PCIC probe:
May 25 10:52:43 erss-hathout kernel: Intel i82365sl B step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
May 25 10:52:43 erss-hathout kernel: host opts [0]: none
May 25 10:52:43 erss-hathout kernel: host opts [1]: none
May 25 10:52:43 erss-hathout kernel: ISA irqs (scanned) = 3,4,5,7,9,11,12 status change on irq 11
May 25 10:52:43 erss-hathout kernel: cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x107f 0x10a0-0x10c7 0x10d0-0x10ef 0x1170-0x1177 0x11f0-0x11ff 0x1220-0x122f 0x1370-0x1377 0x1388-0x138f 0x13f0-0x13f7 0x1400-0x147f 0x14a0-0x14c7 0x14d0-0x14ef 0x1570-0x1577 0x15f0-0x15ff 0x1620-0x162f 0x1770-0x1777 0x1788-0x178f 0x17f0-0x17f7
May 25 10:52:43 erss-hathout kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x1f8-0x1ff 0x220-0x22f 0x378-0x37f 0x388-0x38f 0x400-0x4c7 0x4d0-0x4ef
May 25 10:52:43 erss-hathout kernel: cs: IO port probe 0x0a00-0x0aff: excluding 0xa20-0xa2f
May 25 10:52:43 erss-hathout kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
May 25 10:52:43 erss-hathout kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
May 25 10:52:43 erss-hathout kernel: eth0: Xircom: port 0x300, irq 3, hwaddr 00:80:C7:27:43:B9
May 25 10:52:45 erss-hathout kernel: eth0: media 10BaseT, silicon revision 4
May 25 10:53:03 erss-hathout kernel: aha152x: processing commandline: ok
May 25 10:53:03 erss-hathout kernel: aha152x: BIOS test: passed, detected 1 controller(s)
May 25 10:53:03 erss-hathout kernel: aha152x0: vital data: PORTBASE=0x340, IRQ=5, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
May 25 10:53:03 erss-hathout kernel: aha152x: trying software interrupt, ok.
May 25 10:53:03 erss-hathout kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
May 25 10:53:03 erss-hathout kernel: scsi : 1 host.
May 25 10:53:09 erss-hathout kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
May 25 10:53:15 erss-hathout kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
May 25 10:53:21 erss-hathout kernel: scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun 0 Test Unit Ready 00 00 00 00 00
May 25 10:53:27 erss-hathout kernel: scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun 0 Test Unit Ready 00 00 00 00 00
May 25 10:53:33 erss-hathout kernel: scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00
May 25 10:53:39 erss-hathout kernel: scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00
May 25 10:53:45 erss-hathout kernel: scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00
May 25 10:53:51 erss-hathout kernel: scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00
May 25 10:53:57 erss-hathout kernel: scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4, lun 0 Test Unit Ready 00 00 00 00 00
Reply to: