Re: Problem with bridges
В Пнд, 11/09/2006 в 20:10 +0100, George Borisov пишет:
> Hello,
>
> I have 2 Debian boxes configured as bridges and linking together
> two switches.
>
> On both:
>
> eth1 is connected to switch 1
> eth2 is connected to switch 2
> STP is on
>
> PC1 is the root bridge.
>
> As far as bridging stuff, everything works.
>
> STP kicks in and eth2 on PC2 is in blocking state.
>
> The problem is that PC2 can not reliably connect to PC1. Pinging
> from PC2 to PC1 results in about 80% packet loss.
>
> However (and this is the weird thing) pinging from PC1 to PC2
> works just fine, no packet loss at all!
>
> Running tcpdump on the PC1 br0 interface shows that only a few
> packets from PC2 arrive, which is why it does not respond.
>
> If I remove the bridge from PC2 then PC2 can ping PC1 from either
> interface (whichever I configure.)
>
> Any idea what is going on?
I have no idea, but I have had the same situation when I tried to setup
bridge over bond.
So I'm also interested in solution of this subject.
--
Покотиленко Костик <casper@meteor.dp.ua>
Reply to: