Please excuse, but I am not a router/firewall-guru...
Hello,
I was using LRP 2.9.4 <http://www.linux-router.org/> with Kernel 2.0.38
on a Floppy to route 5 NIC's (192.168.1-5.0) to an USR Courier I-modem
with IP-Masq.
I have setup ipfwadm and all is workig fine as desired.
Now I will get in some month my E1 with a full C-Class network and I
have reconfigured my network, so that I need to change only the firs
three numbers of the IP's.
I have changed my Network as follows:
eth0 inet-Access curently unconfigured
eth1 publicnet Network 192.168.1.0
64 IP's IP 192.168.1.1
Broadcast 192.168.1.63
Netmask 255.255.255.192
eth2 privatenet Network 192.168.1.64
32 IP's IP 192.168.1.65
Broadcast 192.168.1.94
Netmask 255.255.255.224
eth3 securenet Network 192.168.1.96
16 IP's IP 192.168.1.97
Broadcast 192.168.1.111
Netmask 255.255.255.240
eth4 cybernet Network 192.168.1.112
8 IP's IP 192.168.1.113
Broadcast 192.168.1.119
Netmask 255.255.255.248
eth5 wavenet Network 192.168.1.128
128 IP's IP 192.168.1.129
Broadcast 192.168.1.255
Netmask 255.255.255.128
I use ipfwadm and I can connect as desired between the Networks...
+-----------+
| router |
+-----------+ | eth1+--- publicnet
| | | |
| ppp-box | | eth2+---privatenet
| |IP-Masq | |
Inet -----------+ppp0 eth1+-----------+eth0 eth3+--- securenet
By-Call-ISP | | | |
| | | eth4+--- cybernet
| | | |
+-----------+ | eth5+--- wavenet
| |
+-----------+
Because I like to create I full working "RESCUE-ROUTER-DISK" for
reserve and do not make IP-Masq on it, I like to simulate the
Internet-Connection with a seperately ppp-box which do the IP-Masq
and connect to a By-Call-Provider with my Courier I-modem.
------------------------------------------------------------------------
Question: How must I do the routing between the PPP-Box and the router,
while on the ppp-box is the Masquerading stuff which run LRP
as well ???
Must they have: Network 192.168.1.120
IP 192.168.1.121 router
IP 192.168.1.121 ppp-box
Broadcast 192.168.1.127
Netmask 255.255.255.240
------------------------------------------------------------------------
If I have this running, I like to do the next step:
On my Router I have a Harddisk in which I have installed WOODY.
All suff not neede is removed like ppp, pppconf, pppoe, ipchains,
dhcpd, dhcpcd, man-db, manpages...
How can I make the same Router-Setup with WOODY and iptables...
Firewall comes soon...
Thanks
Michelle Konzack
P.S.: Curently I am in Hospital and cann not answer immediatly.
Reply to: