Re: Recommendations for 2 or 4-port ethernet card?
On Wed, 10 Jul 2002, Lee Bradshaw wrote:
> I need at least a 2-port (or preferably 4-port) 10BT (10/100 would be
> ok) ethernet card for a firewall. It's a small machine - bigger than a
> laptop, smaller than a vcr - with only 1 PCI slot. Does anyone have any
> recommendations for a 32-bit/33 MHz PCI card that works with linux?
DFE-570TX 4-Port Server Network Adapter
http://www.dlink.com/products/adapters/dfe570tx/
Costs (last I checked) a fraction of the Adaptec's quad.
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0: MII transceiver #1 config 3100 status 7869 advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at 0x9800, 00:80:C8:CA:4E:95, IRQ 15.
tulip1: EEPROM default media type Autosense.
tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip1: MII transceiver #1 config 3100 status 7849 advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at 0x9400, 00:80:C8:CA:4E:96, IRQ 5.
tulip2: EEPROM default media type Autosense.
tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip2: MII transceiver #1 config 3100 status 7849 advertising 01e1.
eth2: Digital DS21143 Tulip rev 65 at 0x9000, 00:80:C8:CA:4E:97, IRQ 11.
tulip3: EEPROM default media type Autosense.
tulip3: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip3: MII transceiver #1 config 3100 status 7869 advertising 01e1.
eth3: Digital DS21143 Tulip rev 65 at 0x8800, 00:80:C8:CA:4E:98, IRQ 10.
Cheers,
Cristian
--
To UNSUBSCRIBE, email to debian-firewall-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: