Bug#569337: xserver-xorg-input-tslib: "xset q" crashes X server

[Timo Juhani Lindfors <timo.lindfors@iki.fi>]

Hi Hector,

Hector Oron <hector.oron@gmail.com> writes:
> Could you try to add to /usr/share/X11/xorg.conf.d/50-tslib.conf
> InputClass section:
>   MatchDevicePath "/dev/input/event*"
>
> And see if the issue persists?

Unfortunately this does not seem to help:

root@ginger:~# xterm &
[1] 27457
root@ginger:~# xset q
Keyboard Control:
  auto repeat:  on    key click percent:  0    LED mask:  00000000
  XKB indicators:
    00: Caps Lock:   off    01: Num Lock:    off    02: Scroll Lock: off
    03: Shift Lock:  off    04: Group 2:     off    05: Mouse Keys:  off
  auto repeat delay:  660    repeat rate:  25
  auto repeating keys:  00ffffffdffffbbf
                        fadfffdfffdfe5ef
                        ffffffffffffffff
                        ffffffffffffffff
  bell percent:  50    bell pitch:  400    bell duration:  100
Pointer Control:
  acceleration:  2/1    threshold:  4
Screen Saver:
  prefer blanking:  yes    allow exposures:  yes
  timeout:  600    cycle:  600
Colors:
  default colormap:  0x20    BlackPixel:  0    WhitePixel:  65535
Font Path:
  /usr/share/fonts/X11/misc,built-ins
DPMS (Energy Star):
  Standby: 600    Suspend: 600    Off: 600
  DPMS is Enabled
  Monitor is On
root@ginger:~# xset q
xterm:  fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0.0"
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
      after 8 requests (7 known processed) with 0 events remaining.

...

(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
(EE) GLX: could not load software renderer
(II) GLX: no usable GL providers found for screen 0
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Width" "480"
(**) Option "Height" "640"
(II) XINPUT: Adding extended input device "Mouse0" (type: TOUCHSCREEN)
xf86TslibControlProc
xf86TslibControlProc
(**) power: always reports core events
(**) power: Device: "/dev/input/event0"
(II) power: Found keys
(II) power: Configuring as keyboard
(II) XINPUT: Adding extended input device "power" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) LoadModule: "kbd"
(WW) Warning, couldn't open module kbd
(II) UnloadModule: "kbd"
(EE) Failed to load module "kbd" (module does not exist, 0)
(EE) No input driver matching `kbd'
(II) config/udev: Adding input device Neo1973 Buttons (/dev/input/event4)
(II) AutoAddDevices is off - not adding device.
(II) config/udev: Adding input device PCF50633 PMU events (/dev/input/event0)
(II) AutoAddDevices is off - not adding device.
(II) config/udev: Adding input device s3c2410 TouchScreen (/dev/input/event1)
(II) AutoAddDevices is off - not adding device.
(II) config/udev: Adding input device lis302-1 (top) (/dev/input/event2)
(II) AutoAddDevices is off - not adding device.
(II) config/udev: Adding input device lis302-2 (bottom) (/dev/input/event3)
(II) AutoAddDevices is off - not adding device.


Backtrace:
Segmentation fault at address 0xc

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting


Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

xf86TslibControlProc
xf86TslibControlProc
xf86TslibUninit
xf86TslibControlProc
(II) UnloadModule: "tslib"
Aborted




-Timo