Re: BT848 loose PAL color with 2.4 to 2.6 kernel swicthing
Laurent Pointal wrote:
> [note: I posted a bug report in kernel bugzilla, but there may be more
> users of the targeted hardware here than in kernel list]
>
> Hello,
>
> I have problems to make a frame grabber card working with colors
> in PAL mode after a switch from 2.4 to 2.6 kernel.
>
> The card is an embedded PC104+ with a BT848 chip. It has a camera
> connected on Television input slot.
...after a post in the kernel bugzilla, the solution is to add pll=28 as
bttv module option...
For more details, see:
http://bugzilla.kernel.org/show_bug.cgi?id=4769
--
Laurent POINTAL
CNRS-LIMSI dépt. CHM, groupes AMI et PS
Courriel: laurent.pointal@limsi.fr (prof)
laurent.pointal@laposte.net (perso)
Ouebe: http://www.limsi.fr/Individu/pointal/
Tél. 01 69 85 81 06 (prof)
Fax. 01 69 85 80 88
Reply to: