Re: Debian Edu 12 - Call for Testing
Hi,
wanted to install a (roaming) workstation today. But: there is no
installation feature in the pxe over IPv4 menu :-(
just
Diskless Workstation (server's SquashFS image)
Plain X2Go Thin Client (64-Bit, NFS rootfs)
Memory test
Enter iPXE configuration
Drop to iPXE Shell
Boot from the first local disk
Exit iPXE and continue BIOS boot
Did I miss something during/after installation of tjener because:
root@tjener:~# cat /srv/tftp/ltsp/ltsp.ipxe
#!ipxe
# This file is part of LTSP, https://ltsp.org
# Copyright 2019 the LTSP team, see AUTHORS
# SPDX-License-Identifier: GPL-3.0-or-later
# Configure iPXE for LTSP
# Documentation=man:ltsp-ipxe(8)
# Set the default image (img) based on arch, or to root-path if it's not
empty
cpuid --ext 29 && set img x86_64 || set img x86_32
isset ${root-path} && set img ${root-path} ||
isset ${proxydhcp/dhcp-server} && set srv ${proxydhcp/dhcp-server} ||
set srv ${next-server}
# Define cmdline parameters common to all LTSP clients
set cmdline_ltsp BOOTIF=01-${mac:hexhyp}
goto ${mac} || goto start
# The following client-specific settings can be defined in ltsp.conf:
# DEFAULT_IMAGE (img): default menu item for that client
# KERNEL_PARAMETERS (cmdline_client): additional kernel parameters
# MENU_TIMEOUT (menu-timeout): menu milliseconds, 0=forever, -1=hide menu
# For those clients, :mac:address sections are generated below
:61:6c:6b:69:73:67
:start
# To completely hide the menu, set menu-timeout to -1
isset ${menu-timeout} || set menu-timeout 5000
iseq "${menu-timeout}" "-1" && goto ${img} ||
menu iPXE boot menu - ${hostname}:${srv}:${root-path} || goto ${img}
item --gap Boot an image from the network in LTSP
mode:
item --key 1 x86_64 Diskless Workstation (server's
SquashFS image)
item --key 2 r_x2go-bare-amd64 Plain X2Go Thin Client (64-Bit, NFS
rootfs)
item
item --gap Other options:
item --key m memtest Memory test
item --key c config Enter iPXE configuration
item --key s shell Drop to iPXE shell
item --key d disk Boot from the first local disk
item
item --key x exit Exit iPXE and continue BIOS boot
choose --timeout ${menu-timeout} --default ${img} img || goto cancel
goto ${img}
:x86_64
:images
# The "images" method can boot anything in /srv/ltsp/images
set cmdline_method root=/dev/nfs nfsroot=${srv}:/srv/ltsp
ltsp.image=images/${img}.img loop.max_part=9
goto ltsp
:r_x2go-bare-amd64
set img x2go-bare-amd64 && goto roots
:roots
# The "roots" method can boot all /srv/ltsp/roots
set cmdline_method root=/dev/nfs nfsroot=${srv}:/srv/ltsp/${img}
goto ltsp
:ltsp
# :images and :roots jump here after setting cmdline_method
set cmdline ${cmdline_method} ${cmdline_ltsp} ${cmdline_client}
# In EFI mode, iPXE requires initrds to be specified in the cmdline
kernel /ltsp/${img}/vmlinuz initrd=ltsp.img initrd=initrd.img ${cmdline}
initrd /ltsp/${img}/ltsp.img
initrd /ltsp/${img}/initrd.img
boot || goto failed
:memtest
iseq ${platform} pcbios && kernel memtest.0 || kernel memtest.efi
# Boot "fails" on normal memtest exit with Esc, so show the menu again
boot ||
goto start
:config
config
goto start
:shell
echo Type 'exit' to get the back to the menu
shell
goto start
:disk
# Boot the first local HDD
sanboot --no-describe --drive 0x80 || goto failed
:exit
# Exit with error, to fall back to the next boot option
# http://forum.ipxe.org/showthread.php?tid=6775
exit 1
:cancel
echo You cancelled the menu, dropping to shell
goto shell
:failed
echo Booting failed, dropping to shell
goto shell
?
Kind regards
readu
Frank
Reply to: