[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#286262: marked as done (Some problems on Alpha)

Your message dated Sun, 6 Jul 2008 13:09:04 +0200
with message-id <20080706110904.GE25939@klodrik.uio.no>
and subject line Re: Bug#286262: Some problems on Alpha
has caused the Debian Bug report #286262,
regarding Some problems on Alpha
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
286262: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=286262
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: xdebconfigurator
Version: 1.14
Severity: normal

Hi,

I tried xdebconfigurator on an Alpha. It recognizes the Radeon card fine. There
are some problems, though:

* Needless Option "Emulate3Buttons" for the mouse
* Monitor not recognized. I get what looks like a default description:

       Identifier      "Xdebc Monitor"
       HorizSync       28-50
       VertRefresh     43-75
   1152x864 resolution

The monitor is actually a  1280x1024 LCD device attached to the analog
output. XFree recognizes it:

(II) RADEON(0): Displays Detected: Monitor1--Type 1, Monitor2--Type 0

(II) RADEON(0): Monitor1 EDID data ---------------------------
(II) RADEON(0): Manufacturer: STC  Model: 902  Serial#: 197
(II) RADEON(0): Year: 2002  Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync:  Separate
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 38  vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.648 redY: 0.346   greenX: 0.292 greenY: 0.602
(II) RADEON(0): blueX: 0.150 blueY: 0.130   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h
_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v
_border: 0
(II) RADEON(0): Serial No: 0244FF00197
(II) RADEON(0): Ranges: V min: 50  V max: 75 Hz, H min: 30  H max: 82 kHz, PixCl
ock max 140 MHz
(II) RADEON(0): Monitor name: SAMPO S19MI
(II) RADEON(0): End of Monitor1 EDID data --------------------


* "DefaultDepth    16": Huh? Nobody ever wants that, unless the graphics
   card severely lacks memory.

-- System Information:

Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: alpha
Kernel: Linux 2.6.8
Locale: LANG=C, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)

Versions of packages xdebconfigurator depends on:
ii  debconf [debconf-2.0]         1.4.41     Debian configuration management sy
ii  discover1                     1.7.5      hardware identification system
ii  kudzu                         1.1.67-1   The Red Hat Linux hardware probing
ii  perl-modules                  5.8.4-5    Core Perl modules

-- debconf information:
  base-config/menu/xdebconfigurator:
  xdebconfigurator/generate-at-boot: false

--- End Message ---
--- Begin Message --- 
Version: 1.34

[Falk Hueffner]
> Unfortunately, I don't have access to my Alpha at the moment, for the
> foreseeable future, so I can't test it... Sorry.

OK.  I believe and assume the ddcprobe fixes done in version 1.34 also
work on alpha, and closes this bug as fixed.  Please reopen or file a
new one if the problem still exist.

Happy hacking,
-- 
Petter Reinholdtsen

--- End Message ---
Reply to: