[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: ATI Grafik



Klaus Ade Johnstad schrieb:

Onsdag 27. august 2008, skrev Jörg Menzel:

Hallo Liste,

ich habe an einer Workstation eine ATI FireGLX11 Grafikkarte (vom
System) erkannt, der angeschlossene 19"  TFT sieht leider sehr
unscharf und verschwommen aus?! Ich habe schon in der Datei
/etc/X11/xorg.conf mal "vesa" als Device eingetragen, das brachte
aber keine Besserung und auf der ATI-Seite gibt es keinen passenden
Linux Treiber für den Grafikchip zum Download. Was jetzt?

Ich bin für jeden Hinweis dankbar
Jörg
I would try Holger Levsens backport of xorg, 
http://layer-acht.org/debian/xorg-etch-backports/

Those backports have helped me a lot before.
Die backports habe ich auch mal installiert, aber irgendwie hilft mir das auch nicht weiter? Ich tippe mal auf einen Konfigurationsfehler von mir, aber welchen?
Hier die Inhalte der Dateien xorg.0.log (ich hoffe ich bekomme jetzt kein Ärger mit der Liste wegen Überlänge oder so....ich habe aber versucht scheinbar Unwichtiges zu löschen) 

Viele Grüße
Jörg
___________________
cat /var/log/Xorg.0.log

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.1~git20080105-1~holger-1) Current Operating System: Linux static01.intern 2.6.18-6-486 #1 Mon Aug 18 08:05:56 UTC 2008 i686 
Build Date: 09 January 2008  09:05:47PM

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 29 09:41:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Standardbildschirm"
(**) |   |-->Device "ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/X11R6/lib/X11/fonts/misc" does not exist.
      Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
      Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
      Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
      Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi/" does not exist.
      Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
      Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
      Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi" does not exist.
      Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. 
      Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/X11/misc,/usr/share/fonts/X11/cyrillic,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType. 
(**) FontPath set to:
      /usr/share/fonts/X11/misc,
      /usr/share/fonts/X11/100dpi/:unscaled,
      /usr/share/fonts/X11/75dpi/:unscaled,
      /usr/share/fonts/X11/Type1,
      /usr/share/fonts/X11/100dpi,
      /usr/share/fonts/X11/75dpi,
      /usr/share/fonts/X11/misc,
      /usr/share/fonts/X11/cyrillic,
      /usr/share/fonts/X11/100dpi/:unscaled,
      /usr/share/fonts/X11/75dpi/:unscaled,
      /usr/share/fonts/X11/Type1,
      /usr/share/fonts/X11/100dpi,
      /usr/share/fonts/X11/75dpi,
      /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d4900
(II) Module ABI versions:
      X.Org ANSI C Emulation: 0.3
      X.Org Video Driver: 2.0
      X.Org XInput driver : 2.0
      X.Org Server Extension : 0.3
      X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.0.0
      ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1019,0996 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0a:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:11:0: chip 1106,3074 card 1019,0996 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1019,0996 rev 30 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1002,5046 card 1002,0008 rev 00 class 03,00,00 hdr 00 
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
      [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
      [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
      [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
      [0] -1  0       0x0000c000 - 0x0000c0ff (0x100) IX[B]
      [1] -1  0       0x0000c400 - 0x0000c4ff (0x100) IX[B]
      [2] -1  0       0x0000c800 - 0x0000c8ff (0x100) IX[B]
      [3] -1  0       0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
      [0] -1  0       0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
      [0] -1  0       0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS rev 0, Mem @ 0xe4000000/26, 0xe9000000/14, I/O @ 0xc000/8 
(II) Addressable bus resource ranges are
      [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
      [1] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
      [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
      [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
      [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
      [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
      [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
      [5] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff 
(II) Active PCI resource ranges:
      [0] -1  0       0xeb000000 - 0xeb0000ff (0x100) MX[B]
...       [10] -1 0       0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
      [0] -1  0       0xeb000000 - 0xeb0000ff (0x100) MX[B]
 ...     [10] -1 0       0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
      [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
      [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
      [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
      [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
      [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
      [5] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
      [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    ...  [16] -1 0       0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file. 
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded. This was enabled by default and also specified in the config file. 
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file. 
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.0.0
      ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.0.0
      Module class: X.Org Server Extension
      ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
      compiled for 1.4.0.90, module version = 2.1.0
      Module class: X.Org Font Renderer
      ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.0.0
      ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.0.0
      ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.1.0
      ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.0.0
      Module class: X.Org Server Extension
      ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.13.0
      Module class: X.Org Server Extension
      ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
      compiled for 1.4.0, module version = 6.7.197
      Module class: X.Org Video Driver
      ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
      compiled for 1.4.0, module version = 1.2.2
      Module class: X.Org XInput Driver
      ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
      compiled for 1.4.0, module version = 1.2.3
      Module class: X.Org XInput Driver
      ABI class: X.Org XInput driver, version 2.0
(II) ATI: ATI driver wrapper (version 6.7.197) for chipsets: mach64, rage128, radeon 
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
      compiled for 1.4.0, module version = 4.1.0
      Module class: X.Org Video Driver
      ABI class: X.Org Video Driver, version 2.0
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP), ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP), 
      ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
      ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
      ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
      ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
      ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
      ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
      ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
      ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
      ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
      ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
      ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
      ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
      ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
      ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
      ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
      ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
      ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
      ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
      ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
      ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
      ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
      ATI Rage 128 Pro ULTRA TU (AGP?)
(--) Chipset ATI Rage 128 Pro GL PF (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
      [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
     ... [16] -1 0       0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) resource ranges after probing:
      [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    ...  [20] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B]
      [21] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 0.1.0
      ABI class: X.Org Video Driver, version 2.0
(II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Pro GL PF (AGP)" (ChipID = 0x5046)
(--) R128(0): Linear framebuffer at 0xe4000000
(--) R128(0): MMIO registers at 0xe9000000
(--) R128(0): VideoRAM: 32768 kByte (64-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(II) R128(0): Primary Display == Type 3
(WW) R128(0): Can't determine panel dimensions, and none specified.
      Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=40000; xclk=12000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 32768 kB
(II) R128(0): VESA VBE OEM: ATI RAGE128
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: R128
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level none
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read failed
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(==) R128(0): Write-combining range (0xe4000000,0x2000000)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) R128(0): I2C device "DDC:ddc2" removed.
(EE) R128(0): No DFP detected
(II) R128(0): Standardbildschirm: Using hsync range of 28.00-64.00 kHz
(II) R128(0): Standardbildschirm: Using vrefresh range of 43.00-61.00 Hz
(II) R128(0): Clock range:  12.50 to 400.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
(II) R128(0): Not using default mode "320x175" (vrefresh out of range)
...(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1440x900" (width too large for virtual size) 
(--) R128(0): Virtual size is 1280x1024 (pitch 1280)
(**) R128(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) 
(**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) 
(**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) 
(**) R128(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz) 
(**) R128(0):  Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) 
(**) R128(0):  Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 (49.7 kHz) 
(**) R128(0):  Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x768"x60.0 80.14 1280 1344 1480 1680 768 769 772 795 (47.7 kHz) 
(**) R128(0):  Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) R128(0): Modeline "1152x768"x54.8 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync (44.2 kHz) 
(**) R128(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) 
(**) R128(0):  Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz) 
(**) R128(0):  Default mode "720x450": 54.4 MHz, 56.9 kHz, 60.2 Hz (D)
(II) R128(0): Modeline "720x450"x60.2 54.42 720 736 940 956 450 459 463 473 doublescan +hsync +vsync (56.9 kHz) 
(**) R128(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) 
(**) R128(0):  Default mode "640x400": 41.7 MHz, 49.7 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "640x400"x60.0 41.73 640 672 740 840 400 400 402 414 doublescan (49.7 kHz) 
(**) R128(0):  Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "640x384"x60.1 40.07 640 672 740 840 384 384 386 397 doublescan (47.7 kHz) 
(**) R128(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) R128(0): Modeline "576x384"x54.8 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync (44.2 kHz) 
(**) R128(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz) 
(**) R128(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) R128(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz) 
(**) R128(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) R128(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz) 
(**) R128(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz) 
(==) R128(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.0.0
      ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.2.0
      ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
      compiled for 1.4.0.90, module version = 1.0.0
      ABI class: X.Org ANSI C Emulation, version 0.3
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
      of this adapter, please see http://gatos.sf.net.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
      [0] 0   0       0xe9000000 - 0xe9003fff (0x4000) MS[B]
  ...    [23] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
      [24] 0  0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) R128(0): Write-combining range (0xe4000000,0x2000000)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) R128(0): [drm] Using the DRM lock SAREA also for drawables.
(II) R128(0): [drm] framebuffer handle = 0xe4000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3099; Card 0x1002/0x5046]
(II) R128(0): [agp] 8192 kB allocated with handle 0x00000001
(II) R128(0): [agp] ring handle = 0xe0000000
(II) R128(0): [agp] Ring mapped at 0xb58ad000
(II) R128(0): [agp] ring read ptr handle = 0xe0101000
(II) R128(0): [agp] Ring read ptr mapped at 0xb7c4e000
(II) R128(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0xb56ad000
(II) R128(0): [agp] AGP texture map handle = 0xe0302000
(II) R128(0): [agp] AGP Texture map mapped at 0xb51cd000
(II) R128(0): [drm] register handle = 0xe9000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (1280,5120)
(II) R128(0): Reserved area from (0,1024) to (1280,1026)
(II) R128(0): Largest offscreen area available: 1280 x 4094
(II) R128(0): Reserved back buffer from (0,1026) to (1280,2050)
(II) R128(0): Reserved depth buffer from (0,2050) to (1280,3075)
(II) R128(0): Reserved depth span from (0,3074) offset 0x781400
(II) R128(0): Reserved 19968 kb for textures at offset 0xc80000
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
      Screen to screen bit blits
      Solid filled rectangles
      8x8 mono pattern filled rectangles
      Indirect CPU to Screen color expansion
      Solid Lines
      Dashed Lines
      Offscreen Pixmaps
      Setting up tile and stipple cache:
              32 128x128 slots
              13 256x256 slots
              4 512x512 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 6150)
(II) R128(0): Largest offscreen area available: 1280 x 2043
(**) Option "dpms"
(**) R128(0): DPMS enabled
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 11
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r128_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Generic Keyboard: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Generic Keyboard: XkbVariant: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD) 
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! 
(II) R128(0): [drm] removed 1 reserved context for kernel
(II) R128(0): [drm] unmapping 8192 bytes of SAREA 0xf8bcc000 at 0xb7fb6000
(II) R128(0): [drm] Closed DRM master.
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 3, should be 2; fixing. 
(II) Open ACPI successful (/var/run/acpid.socket)
(II) APM registered successfully
(==) R128(0): Write-combining range (0xe4000000,0x2000000)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) R128(0): [drm] Using the DRM lock SAREA also for drawables.
(II) R128(0): [drm] framebuffer handle = 0xe4000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3099; Card 0x1002/0x5046]
(II) R128(0): [agp] 8192 kB allocated with handle 0x00000001
(II) R128(0): [agp] ring handle = 0xe0000000
(II) R128(0): [agp] Ring mapped at 0xb58ad000
(II) R128(0): [agp] ring read ptr handle = 0xe0101000
(II) R128(0): [agp] Ring read ptr mapped at 0xb7c4e000
(II) R128(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0xb56ad000
(II) R128(0): [agp] AGP texture map handle = 0xe0302000
(II) R128(0): [agp] AGP Texture map mapped at 0xb51cd000
(II) R128(0): [drm] register handle = 0xe9000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (1280,5120)
(II) R128(0): Reserved area from (0,1024) to (1280,1026)
(II) R128(0): Largest offscreen area available: 1280 x 4094
(II) R128(0): Reserved back buffer from (0,1026) to (1280,2050)
(II) R128(0): Reserved depth buffer from (0,2050) to (1280,3075)
(II) R128(0): Reserved depth span from (0,3074) offset 0x781400
(II) R128(0): Reserved 19968 kb for textures at offset 0xc80000
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 6150)
(II) R128(0): Largest offscreen area available: 1280 x 2043
(**) R128(0): DPMS enabled
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 11
(II) R128(0): Direct rendering enabled
(==) RandR enabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r128_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) evaluating device (Configured Mouse)
(II) evaluating device (Generic Keyboard)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! 
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) Configured Mouse: ps2EnableDataReporting: succeeded
______________________________
Reply to: