[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#773467: marked as done ("Efikamx plattform not supported in jessie anymore")

Your message dated Sun, 17 Feb 2019 21:34:52 +0100
with message-id <b7e34dd6-d425-a153-29b8-08369254f693@debian.org>
and subject line Re: Bug#773467: efikamx: linux-image-3.2.0-4-mx5 is not upgraded to linux-image-armmp (and that one doesn't work)
has caused the Debian Bug report #773467,
regarding "Efikamx plattform not supported in jessie anymore"
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
773467: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=773467
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux,upgrade-reports
Version: 3.16.7-ckt2-1
Severity: important

Dear maintainers,

I've just upgraded my Genesi EfikaMX nettop from wheezy to jessie and the only
package which wasn't upgraded was linux-image-3.2.0-4-mx5, so I had to install
linux-image-armmp manually... I'm not really sure how to solve this sensibly,
suggesting that linux-image-armmp should provide linux-image-3.2.0-4-mx5 seems
strange. 

Besides that the upgrade when flawlessly, but the system only has 450 packages
installed anyway. But still, very neat! "Just this"...:

root@efikamx:~# apt-get install linux-image-armmp
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
  linux-image-3.16.0-4-armmp
Suggested packages:
  linux-doc-3.16 debian-kernel-handbook fdutils
Recommended packages:
  irqbalance
The following NEW packages will be installed:
  linux-image-3.16.0-4-armmp linux-image-armmp
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 24.6 MB of archives.
After this operation, 104 MB of additional disk space will be used.
Do you want to continue? [Y/n] 
Get:1 http://ftp.de.debian.org/debian/ jessie/main linux-image-3.16.0-4-armmp armhf 3.16.7-ckt2-1 [24.6 MB
Get:2 http://ftp.de.debian.org/debian/ jessie/main linux-image-armmp armhf 3.16+63 [5368 B]               
Fetched 24.6 MB in 7s (3394 kB/s)                                                                         
Preconfiguring packages ...
Selecting previously unselected package linux-image-3.16.0-4-armmp.
(Reading database ... 43566 files and directories currently installed.)
Preparing to unpack .../linux-image-3.16.0-4-armmp_3.16.7-ckt2-1_armhf.deb ...
Unpacking linux-image-3.16.0-4-armmp (3.16.7-ckt2-1) ...
Selecting previously unselected package linux-image-armmp.
Preparing to unpack .../linux-image-armmp_3.16+63_armhf.deb ...
Unpacking linux-image-armmp (3.16+63) ...
Setting up linux-image-3.16.0-4-armmp (3.16.7-ckt2-1) ...
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-3.16.0-4-armmp
flash-kernel: deferring update (trigger activated)
/etc/kernel/postinst.d/zz-flash-kernel:
flash-kernel: deferring update (trigger activated)
Setting up linux-image-armmp (3.16+63) ...
Processing triggers for flash-kernel (3.28) ...
flash-kernel: installing version 3.16.0-4-armmp
Generating kernel u-boot image... done.
Taking backup of uImage.
Installing new uImage.
Generating initramfs u-boot image... done.
Taking backup of uInitrd.
Installing new uInitrd.
Generating boot script u-boot image... done.
Taking backup of boot.scr.
Installing new boot.scr.
root@efikamx:~#

And now let's see how it reboots :-)

...

It didn't come back, will need to attach a serial console and see if I see
anything useful there...


cheers,
	Holger

-- Package-specific info:
** Version:
Linux version 3.2.0-4-mx5 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.63-2+deb7u2

** Command line:
console=ttymxc0,115200 console=tty1 rootwait rw

** Not tainted

** Kernel log:
[    1.634403] usb usb2: Product: Freescale On-Chip EHCI Host Controller
[    1.640871] usb usb2: Manufacturer: Linux 3.2.0-4-mx5 ehci_hcd
[    1.646730] usb usb2: SerialNumber: mxc-ehci.1
[    1.651779] hub 2-0:1.0: USB hub found
[    1.655586] hub 2-0:1.0: 1 port detected
[    1.660144] mousedev: PS/2 mouse device common for all mice
[    1.666960] mc13xxx-rtc mc13892-rtc: rtc core: registered mc13892-rtc as rtc0
[    1.674393] Registered led device: efikamx:green
[    1.674512] Registered led device: efikamx:red
[    1.674621] Registered led device: efikamx:blue
[    1.675527] usbcore: registered new interface driver usbhid
[    1.681119] usbhid: USB HID core driver
[    1.685750] TCP cubic registered
[    1.689003] NET: Registered protocol family 17
[    1.693491] Registering the dns_resolver key type
[    1.698283] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[    1.707206] registered taskstats version 1
[    1.711726] regulator_init_complete: VCAM: disabling
[    1.716931] regulator_init_complete: VAUDIO: disabling
[    1.722306] regulator_init_complete: VVIDEO: disabling
[    1.727723] regulator_init_complete: VSD: disabling
[    1.733070] mc13xxx-rtc mc13892-rtc: setting system clock to 2014-12-18 15:30:20 UTC (1418916620)
[    1.742030] Initializing network drop monitor service
[    1.747919] Freeing init memory: 128K
[    1.784810] usb 1-1: new high-speed USB device number 2 using mxc-ehci
[    1.835537] udevd[46]: starting version 175
[    1.959704] usb 1-1: New USB device found, idVendor=0b95, idProduct=772a
[    1.966519] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.973672] usb 1-1: Product: AX88x72A
[    1.977464] usb 1-1: Manufacturer: ASIX Elec. Corp.
[    1.982355] usb 1-1: SerialNumber: 123456
[    2.127645] imx-sdma imx35-sdma: firmware: agent aborted loading sdma-imx51.bin (not found?)
[    2.191592] sdhci: Secure Digital Host Controller Interface driver
[    2.197887] sdhci: Copyright(c) Pierre Ossman
[    2.212784] SCSI subsystem initialized
[    2.216711] usb 2-1: new high-speed USB device number 2 using mxc-ehci
[    2.265355] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.309792] Registered led device: mmc0::
[    2.315614] mmc0: SDHCI controller on sdhci-esdhc-imx51.0 [sdhci-esdhc-imx51.0] using ADMA
[    2.430258] libata version 3.00 loaded.
[    2.439662] scsi0 : pata_imx
[    2.443016] ata1: PATA max PIO0 cmd 0x83fe00a0 ctl 0x83fe00d8 irq 70
[    2.450216] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[    2.456984] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.464137] usb 2-1: Product: USB 2.0 Hub [MTT]
[    2.506866] hub 2-1:1.0: USB hub found
[    2.512379] hub 2-1:1.0: 4 ports detected
[    2.659395] mmc0: new high speed SDHC card at address e624
[    2.667913] ata1.00: ATA-8: SanDisk pSSD-P2 8GB, SSD 5.20, max UDMA/133
[    2.674568] ata1.00: 15649200 sectors, multi 0: LBA48 
[    2.679794] ata1.00: configured for PIO
[    2.684197] scsi 0:0:0:0: Direct-Access     ATA      SanDisk pSSD-P2  SSD  PQ: 0 ANSI: 5
[    2.714826] mmcblk0: mmc0:e624 SU08G 7.40 GiB 
[    2.728527]  mmcblk0: p1 p2 p3 < p5 >
[    2.735625] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
[    2.747542] sd 0:0:0:0: [sda] Write Protect is off
[    2.752371] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.752504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.767134]  sda: sda1 sda2
[    2.772096] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.797540] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.844937] usb 2-1.1: new high-speed USB device number 3 using mxc-ehci
[    2.986887] usb 2-1.1: New USB device found, idVendor=13d3, idProduct=3273
[    2.993858] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.001224] usb 2-1.1: Product: 802.11 n WLAN
[    3.005658] usb 2-1.1: Manufacturer: Ralink
[    3.009852] usb 2-1.1: SerialNumber: 1.0
[    3.484490] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.690364] udevd[266]: starting version 175
[    5.092185] m25p80 spi0.1: sst25vf032b (4096 Kbytes)
[    5.163065] Creating 2 MTD partitions on "spi_flash":
[    5.179067] 0x000000000000-0x000000040000 : "u-boot"
[    5.220392] 0x000000040000-0x000000050000 : "config"
[    5.322499] cfg80211: Calling CRDA to update world regulatory domain
[    5.438127] asix 1-1:1.0: eth0: register 'asix' at usb-mxc-ehci.0-1, ASIX AX88772 USB 2.0 Ethernet, 70:71:bc:4e:f7:57
[    5.521982] usbcore: registered new interface driver asix
[    5.665114] usb 2-1.1: reset high-speed USB device number 3 using mxc-ehci
[    5.944529] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.945999] Registered led device: rt2800usb-phy0::radio
[    5.946115] Registered led device: rt2800usb-phy0::assoc
[    5.946237] Registered led device: rt2800usb-phy0::quality
[    5.946333] usbcore: registered new interface driver rt2800usb
[    7.135011] Adding 379900k swap on /dev/mmcblk0p5.  Priority:-1 extents:1 across:379900k SS
[    7.476988] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    7.907132] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    8.202491] loop: module loaded
[   13.174181] NET: Registered protocol family 10
[   14.698079] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.725194] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.745157] asix 1-1:1.0: eth0: link down
[   14.823104] RPC: Registered named UNIX socket transport module.
[   14.829141] RPC: Registered udp transport module.
[   14.833858] RPC: Registered tcp transport module.
[   14.838589] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.881061] FS-Cache: Loaded
[   14.956692] FS-Cache: Netfs 'nfs' registered for caching
[   15.003245] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   16.646911] asix 1-1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[   24.924727] eth0: no IPv6 routers present
[ 4094.370238] systemd-udevd[4225]: starting version 215

** Model information
Processor	: ARMv7 Processor rev 5 (v7l)
Hardware	: Genesi EfikaMX nettop
Revision	: 0013

** Loaded modules:
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ipv6
ext2
loop
arc4
rt2800usb
rt2800lib
crc_ccitt
rt2x00usb
rt2x00lib
mac80211
cfg80211
rfkill
asix
usbnet
m25p80
mii
mtd
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
mmc_block
pata_imx
libata
sdhci_esdhc_imx
sdhci_pltfm
scsi_mod
sdhci
mmc_core

** PCI devices:
not available

** USB devices:
Bus 002 Device 003: ID 13d3:3273 IMC Networks 802.11 n/g/b Wireless LAN USB Mini-Card
Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0b95:772a ASIX Electronics Corp. AX88772A Fast Ethernet
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 8.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: armhf (armv7l)

Kernel: Linux 3.2.0-4-mx5
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: unable to detect

Versions of packages linux-image-3.2.0-4-mx5 depends on:
ii  debconf [debconf-2.0]                   1.5.54
ii  initramfs-tools [linux-initramfs-tool]  0.116
ii  kmod                                    18-3
ii  linux-base                              3.5

Versions of packages linux-image-3.2.0-4-mx5 recommends:
ii  firmware-linux-free  3.3

Versions of packages linux-image-3.2.0-4-mx5 suggests:
pn  debian-kernel-handbook  <none>
pn  fdutils                 <none>
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-mx5 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
ii  firmware-linux          0.43
ii  firmware-linux-nonfree  0.43
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-mx5/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-mx5/postinst/depmod-error-initrd-3.2.0-4-mx5: false
  linux-image-3.2.0-4-mx5/postinst/missing-firmware-3.2.0-4-mx5:
  linux-image-3.2.0-4-mx5/prerm/removing-running-kernel-3.2.0-4-mx5: true

Attachment: signature.asc
Description: This is a digitally signed message part.


--- End Message ---
--- Begin Message --- 
On Thu, 18 Dec 2014 20:39:59 +0100 Holger Levsen <holger@layer-acht.org>
wrote:
> control: retitle -1 "Efikamx plattform not supported in jessie anymore"
> 
> On Donnerstag, 18. Dezember 2014, Bill Allombert wrote:
> > I think that bug should be reassigned to the release notes.
> 
> Point taken, thanks.

jessie has been release a while ago. Let's close this bug.

Paul

Attachment: signature.asc
Description: OpenPGP digital signature


--- End Message ---
Reply to: