Bug#658980: [skge] transmit queue 0 timed out

[Jonathan Nieder <jrnieder@gmail.com>]

severity 658980 important
reassign 658980 src:linux-2.6 3.1.8-2
quit

burek wrote:

> 	I was watching a movie online, using VLC media player and it
> just stopped playing. [...]  The debian was completely cut off of
> the internet.  Ping couldn't resolve any host, ifconfig reported
> nothing unusual, /etc/init.d/networking restart didn't help
[...]
> WARNING: at /build/buildd-linux-2.6_3.1.8-2-i386-3fqT1n/linux-2.6-3.1.8/debian/build/source_i386_none/net/sched/sch_generic.c:255 dev_watchdog+0xb1/0x104()

Thanks for reporting it.  Is this reproducible?

Curious,
Jonathan

> Hardware name: To Be Filled By O.E.M.
> NETDEV WATCHDOG: eth0 (skge): transmit queue 0 timed out
> Modules linked in: snd_seq_dummy ppdev lp bnep rfcomm snd_hrtimer fuse loop snd_usb_audio snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_hwdep snd_usbmidi_lib radeon snd_seq_midi snd_seq_midi_event snd_seq ttm drm_kms_helper cryptd drm aes_i586 joydev aes_generic snd_rawmidi snd_timer snd_seq_device i2c_algo_bit uvcvideo power_supply ecb videodev usbhid media hid snd iTCO_wdt btusb iTCO_vendor_support i2c_i801 i2c_core bluetooth soundcore shpchp pci_hotplug snd_page_alloc rfkill crc16 rng_core evdev pcspkr parport_pc parport processor button thermal_sys ext3 jbd mbcache sd_mod sr_mod crc_t10dif cdrom ata_generic ata_piix libata scsi_mod skge uhci_hcd ehci_hcd usbcore [last unloaded: scsi_wait_scan]
> Pid: 0, comm: swapper Not tainted 3.1.0-1-686-pae #1
> Call Trace:
>  [<c1037698>] ? warn_slowpath_common+0x68/0x79
>  [<c121f799>] ? dev_watchdog+0xb1/0x104
>  [<c1037711>] ? warn_slowpath_fmt+0x29/0x2d
>  [<c121f799>] ? dev_watchdog+0xb1/0x104
>  [<c103c091>] ? local_bh_enable+0x2/0x2
>  [<c1041bd0>] ? run_timer_softirq+0x150/0x1f3
>  [<c121f6e8>] ? netif_tx_unlock+0x3a/0x3a
>  [<c103c091>] ? local_bh_enable+0x2/0x2
>  [<c103c125>] ? __do_softirq+0x94/0x12f
>  [<c103c091>] ? local_bh_enable+0x2/0x2
>  <IRQ>  [<c103c316>] ? irq_exit+0x32/0x80
>  [<c101dbc0>] ? smp_apic_timer_interrupt+0x5b/0x65
>  [<c12af179>] ? apic_timer_interrupt+0x31/0x38
>  [<c1023888>] ? native_safe_halt+0x2/0x3
>  [<c101081e>] ? default_idle+0x52/0x87
>  [<c100aefb>] ? cpu_idle+0x90/0xaa
>  [<c1440708>] ? start_kernel+0x32a/0x32f
> ---[ end trace 42a84afd9f63b42e ]---
> skge 0000:02:05.0: eth0: disabling interface
> skge 0000:02:05.0: eth0: enabling interface
[...]
> After that, I restarted my home router and then I was able to ping
> it and log into it over the web interface, but nothing after the
> router could be accessed, until the reboot.