X4 DRI refuses to go direct
Hi,
After successful installation (some problems remain) of
kernel-2.4.0-test10 on my Woody SMP machine the hope was for X4 to
start up with direct rendering enabled. But this was not the case :(
Another attempt was to insmod agpgart.o and mga.o manually before
starting X: startx > x016.log 2>&1
But now the computer _slows down_ totally!! The response time goes
down to minutes!! X seem to start up but waiting 30 minutes X still had
not started: I can log in remotely and reboot or kill processes
without problems (except long response time). Top shows that X is taking all CPU!!
Maybe this is an FAQ. Anyone have pointers or hints?
Below are the relevant parts of XFree86.0.log and x016.log:
XFee86.0.log:
=============
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.0.1e / X Window System
(protocol Version 11, revision 0, vendor release 6400)
...
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Nov 11 17:22:59 2000
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Nokia"
(**) | |-->Device "Matrox"
...
(--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 4, Mem @ 0xe4000000/25,0xefefc000/14, 0xef000000/23
...
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.0.1e, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.0.1e, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.1
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset mgag400 found
...
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(--) MGA(0): Chipset: "mgag400"
(II) MGA(0): Offscreen memory usage will be limited to 512 lines if the DRI is enabled.
(--) MGA(0): Linear framebuffer at 0xE4000000
(--) MGA(0): MMIO registers at 0xEFEFC000
(--) MGA(0): Pseudo-DMA transfer window at 0xEF000000
(--) MGA(0): BIOS at 0xEFEE0000
(--) MGA(0): Video BIOS info block at offset 0x07A80
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(**) MGA(0): VideoRAM: 32768 kByte
(==) MGA(0): Write-combining range (0xe4000000,0x2000000)
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2176+632: 2808
PROBLEMS HERE:
(0): [drm] drmOpen failed
(EE) MGA(0): [drm] DRIScreenInit Failed
(II) MGA(0): Using 2929 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillMono8x8PatternRects replacement
Setting up tile and stipple cache:
32 128x128 slots
30 256x256 slots
11 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
...
x016.log:
=========
...
(==) MGA(0): Write-combining range (0xe4000000,0x2000000)
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2176+632: 2808
(0): [drm] created "mga" driver at busid "PCI:1:0:0"
(0): [drm] added 4096 byte SAREA at 0xcb94f000
(0): [drm] mapped SAREA 0xcb94f000 to 0x4001b000
(0): [drm] framebuffer handle = 0xe4000000
(0): [drm] added 1 reserved context for kernel
(II) MGA(0): [drm] Registers = 0xefefc000
[drm] drmAgpEnabled succeeded
(II) MGA(0): WARP Microcode Loaded
(II) MGA(0): [drm] calced backoffset: 0x727000
(II) MGA(0): [drm] added 31 65536 byte DMA buffers
(II) MGA(0): [drm] Mga Dma Initialization start
(II) MGA(0): [drm] Mga Dma Initialization done
(II) MGA(0): [drm] Initialized Dma Engine
(II) MGA(0): [drm] dma control initialized, using IRQ 0
(II) MGA(0): visual configs initialized
(II) MGA(0): Using 512 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillMono8x8PatternRects replacement
Setting up tile and stipple cache:
32 128x128 slots
7 256x256 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
...
Reply to: