problems with diald, and local network
I posted this to debian-user yesterday (with no response so far), and it
just occurred to me that seeing hamm is still beta, maybe this should go
here too...
----- Forwarded message from Tim Bell <bhat@cs.mu.OZ.AU> -----
Date: Wed, 1 Jul 1998 12:30:49 +1000
From: Tim Bell <bhat@cs.mu.OZ.AU>
Subject: problems with diald, and local network
I'm having two problems with a new hamm (beta) installation -- I think
they're unrelated, but I may be wrong.
First of all, I can't get the local network working using PCI ne2000
clone card. The output of netstat -nr is (some numbers munged to
protect the innocent):
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
172.16.128.1 0.0.0.0 255.255.255.255 UH 1500 0 0 sl0
192.168.1.0 0.0.0.0 255.255.255.0 U 1500 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 3584 0 0 lo
0.0.0.0 0.0.0.0 0.0.0.0 U 1500 0 0 sl0
And the output of a traceroute to the machine at the other end of the
crossover 10baseT cable:
traceroute to 192.168.1.2 (192.168.1.2), 30 hops max, 40 byte packets
1 timtam.cs.mu.OZ.AU (192.168.1.1) 0.407 ms !H 0.233 ms !H 0.176 ms !H
Now, this says to me that nothing's even getting onto the wire. Is
there some interaction with the anti-spoofing provisions in
/etc/init.d/netbase? Or is the sl0 device set up by diald interfering?
The second problem is with diald. I've connected okay using pon (which
calls pppd), but when using diald, things just stop (at 20:16:57 in the
log below):
Jun 30 20:16:56 timtam chat[898]: send (ppp^M)
Jun 30 20:16:56 timtam chat[898]: send (\d)
Jun 30 20:16:57 timtam diald[875]: Running pppd (pid = 905).
Jun 30 20:16:57 timtam diald[905]: Running pppd: /usr/sbin/pppd -detach
modem crtscts mtu 1500 mru 1500 netmask 255.255.255.192
Jun 30 20:17:32 timtam diald[875]: child process 905 terminated with signal 1
Jun 30 20:17:33 timtam diald[875]: Running connect (pid = 928).
Jun 30 20:17:34 timtam diald[875]: Delaying 30 seconds before clear to dial.
whereas with pon/pppd, I get:
Jun 29 22:00:00 timtam chat[4427]: send (ppp^M)
Jun 29 22:00:00 timtam chat[4427]: send (\d)
Jun 29 22:00:01 timtam pppd[4426]: Serial connection established.
Jun 29 22:00:02 timtam pppd[4426]: Using interface ppp0
Jun 29 22:00:02 timtam pppd[4426]: Connect: ppp0 <--> /dev/ttyS1
Jun 29 22:00:02 timtam pppd[4426]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xffff8c25> <pcomp> <accomp>]
[etc.]
Any ideas?
Version numbers, kernel and hardware configuration, etc., available on
request.
(I'm actually quite embarrassed to be asking this here -- I expected
that my 7th or so Debian install should be troublefree, or require at
the most a couple of visits to the documentation. Oh well...)
TIA,
Tim.
--
Tim Bell - bhat@cs.mu.oz.au - Dept of Comp Sci - Uni of Melbourne, Australia
--
To UNSUBSCRIBE, email to debian-devel-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: