Re: RES: RES: Bug - Problemas de instalação
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 09/08/2006 10:28 AM, Paolo Bordoni Caldeira wrote:
[...]
>>>dmesg | grep -i hd
>
> [4294674.850000] hdb: HL-DT-STDVD-RAM GSA-H20N, ATAPI CD/DVD-ROM drive
> [4294675.429000] hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB
> Cache
> [4294687.327000] hdb: media error (bad sector): status=0x51 { DriveReady
> SeekComplete Error }
> [4294687.327000] hdb: media error (bad sector): error=0x30 {
> LastFailedSense=0x03 }
> [4294687.327000] end_request: I/O error, dev hdb, sector 1429184
> [4294687.327000] Buffer I/O error on device hdb, logical block 357296
> [4294687.785000] hdb: media error (bad sector): status=0x51 { DriveReady
> SeekComplete Error }
> [4294687.785000] hdb: media error (bad sector): error=0x30 {
> LastFailedSense=0x03 }
> [4294687.785000] end_request: I/O error, dev hdb, sector 1429184
> [4294687.785000] Buffer I/O error on device hdb, logical block 357296
> [4294688.242000] hdb: media error (bad sector): status=0x51 { DriveReady
> SeekComplete Error }
> [4294688.242000] hdb: media error (bad sector): error=0x30 {
> LastFailedSense=0x03 }
> [4294688.242000] end_request: I/O error, dev hdb, sector 1429184
> [4294688.242000] Buffer I/O error on device hdb, logical block 357296
> [4294688.734000] hdb: media error (bad sector): status=0x51 { DriveReady
> SeekComplete Error }
> [4294688.734000] hdb: media error (bad sector): error=0x30 {
> LastFailedSense=0x03 }
> [4294688.734000] end_request: I/O error, dev hdb, sector 1429184
> [4294688.734000] Buffer I/O error on device hdb, logical block 357296
> [4294689.190000] hdb: media error (bad sector): status=0x51 { DriveReady
> SeekComplete Error }
> [4294689.190000] hdb: media error (bad sector): error=0x30 {
> LastFailedSense=0x03 }
> [4294689.190000] end_request: I/O error, dev hdb, sector 1429184
> [4294689.190000] Buffer I/O error on device hdb, logical block 357296
> [4294689.645000] hdb: media error (bad sector): status=0x51 { DriveReady
> SeekComplete Error }
> [4294689.645000] hdb: media error (bad sector): error=0x30 {
> LastFailedSense=0x03 }
> [4294689.645000] end_request: I/O error, dev hdb, sector 1429184
> [4294689.645000] Buffer I/O error on device hdb, logical block 357296
> [4294808.334000] hda-intel: Invalid position buffer, using LPIB read method
> instead.
Tem um erro feio no seu HDB. Essas mensagens de erro de
bad sector são problemas. E pelo SeekComplete Error, ele não
consegue acessar corretamente o dispositivo.
>>>dmesg | grep -i ide
>
> [4294667.296000] BIOS-provided physical RAM map:
> [4294667.296000] ACPI: IRQ0 used by override.
> [4294667.296000] ACPI: IRQ2 used by override.
> [4294667.296000] ACPI: IRQ9 used by override.
> [4294669.921000] CPU: After generic identify, caps: bfebfbff 20000000
> 00000000 00000000 0000651d 00000000 00000001
> [4294669.921000] CPU: After vendor identify, caps: bfebfbff 20000000
> 00000000 00000000 0000651d 00000000 00000001
> [4294670.658000] Boot video device is 0000:02:00.0
> [4294671.096000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [4294671.096000] ide: Assuming 33MHz system bus speed for PIO modes;
> override with idebus=xx
> [4294673.239000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
> [4294673.239000] VP_IDE: chipset revision 7
> [4294673.239000] VP_IDE: not 100% native mode: will probe irqs later
> [4294673.239000] VP_IDE: Unknown VIA SouthBridge, disabling DMA. // O linux
> não reconhece a controladora
> [4294673.801000] Probing IDE interface ide0...
> [4294674.901000] Probing IDE interface ide1...
> [4294675.420000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [4294687.327000] ide: failed opcode was: unknown
> [4294687.785000] ide: failed opcode was: unknown
> [4294688.242000] ide: failed opcode was: unknown
> [4294688.734000] ide: failed opcode was: unknown
> [4294689.190000] ide: failed opcode was: unknown
> [4294689.645000] ide: failed opcode was: unknown
Definitivamente, tem algo errado...
> Aproveito para esclarecer que chequei um meu hardware no site
> http://kmuto.jp/debian/hcl/index.cgi com o resutado do comando lspci -n e o
> site me retornou o seguinte resultado referente a controladora SATA 2
> PCI ID Works? Vendor Device
> 11060591 - VIA Technologies, Inc. VT8237A SATA 2-Port
> Controller
>
> Siceramente acho que as distribuições Linux não estã prontas para suportar
> SATA 2, estou quase desistindo. Se alguém tiver mais alguma sugestão por
> favor me diga!
Hmmm, não inverta as responsabilidades, quem desenvolve para
o Linux faz o possível (e muitas vezes o impossível) pra fornecer o
suporte, que seria muito mais fácil e rápido se os fabricantes
fornecessem as especificações de bom grado, melhor ainda, se eles
fizessem os drivers diretamente para o Linux.
> Agradeço desde já a coloboração de todos e do Gustavo e Otavio que vêem me
> ajudando até agora!
Abraço,
- --
Felipe Augusto van de Wiel (faw)
"Debian. Freedom to code. Code to freedom!"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Using GnuPG with Debian - http://enigmail.mozdev.org
iD8DBQFFBstACjAO0JDlykYRAgZXAJwOXWhAVLaiJv7LMF0Gq6nCRO9WoACfcPB0
Apulxh03joBQTd48kczmrCk=
=spPK
-----END PGP SIGNATURE-----
Reply to: