Accepted fai 3.2.18 (source all)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Mon, 20 Apr 2009 12:02:57 +0200
Source: fai
Binary: fai-client fai-doc fai-server fai-quickstart fai-nfsroot
Architecture: source all
Version: 3.2.18
Distribution: unstable
Urgency: low
Maintainer: Thomas Lange <lange@debian.org>
Changed-By: Thomas Lange <lange@debian.org>
Description:
fai-client - Fully Automatic Installation client package
fai-doc - Documentation for FAI
fai-nfsroot - Fully Automatic Installation nfsroot package
fai-quickstart - Fully Automatic Installation quickstart package
fai-server - Fully Automatic Installation server package
Closes: 265973 439250 441436 444210 449236 456978 464541 495535 496072 500208 500244 500579 500821 503653 504801 504813 506463 507892 508192 508247 513090 515057 515139 515775 516385 517417 520257 521027 521153 521172 521290 523625 524369
Changes:
fai (3.2.18) unstable; urgency=low
.
[ Thomas Lange ]
* control: add depends on net-tools for fai-client (closes: #521027)
* ainsl: add test if target file exists,
improve exit codes (closes: #500244)
* fai-cd: use a pipe when sending commands to grub
* ftar, fcopy: add info about the other tool
* new file live.conf will disable some messages during booting
* make-fai-nfsroot: call apt-get update when using -k (closes: #507892),
-k now also upgrades all packages inside the nfsroot,
add -N to install_packages call, this is good for cross architecture
building the nfsroot
check if debootstrap finished properly (closes: #524369)
try to umount mirror before removing old nfsroot (closes: #500208)
* fai-do-scripts: skip files with certain suffixes (closes: #500579),
improve test if $debug is set to 1 (closes: #496072)
call cfagent scripts with -v if fai is in debug mode
* lib/subroutines-linux: don't rely on ' as a field separator when
parsing boot.log, use = and strip off any quotes (closes: #439250),
check earlier if faimond is available, send TASKBEGIN message
* lib/get-config-dir-svn: Make username in svn:// config url optional
(thanks Alexander Fisher) (closes: #441436)
* bin/fai-setup: Do not unconditionally add $FAI_CONFIGDIR to exports(5)
(thanks Sebastian Harl) (closes: #504801)
* lib/get-config-dir-svn: Added support for password in SVN URL (thanks
Robin Powell) (closes: #515057)
* 20-removable_media: add fd0 entry to fstab only if device is present
* fai-cd, make-fai-nfsroot: awk can also do the grep
* NFSROOT: install aMD64 apckages with aptitude, this also helps when
building an amd64 nfsroot on i386
* fai-mirror: check if -C was used, (thanks to James Richardson for the
patch) (closes: #523625), fixing informal message (closes: #516385)
* fai: set STOP_ON_ERROR to 700, this can be overwritten by fai.conf or
in a file called class/*.var (closes: #515139),
create /var/run/fai (closes: #515775)
always change HOSTNAME when -u was used (closes: #456978)
add -u to help message
* fai-client.dirs, fai-server.dirs: remove /var/run/fai
* subroutines: add trap for softupdates (closes: #449236)
stop_fai_installation() sends message to faimond
send TASKEND faiend message
include target directory information into stamp (closes: #503653)
* packages_config/FAIBASE: add lvm2 (closes: #517417)
* fai-chboot: always add $append to pxe configuration (closes: #495535)
* fai-chboot.8: fix description of -i
* compat,rules: update to compat level 7
* fai-mirror: set Dir::Etc option instead of changing
Dir::Etc::sourceslist only (thanks Sebastian Harl) (closes: #504813)
* get-config-dir-git: do not clone into an existing directory (thanks
Sebastian Harl) (closes: #506463)
* mount2dir: add commands to create /var/lock and /var/run on the
filesystem mounted at / (closes: #464541)
* make-fai-nfsroot.8: adjust informationen about -U (closes: #520257)
* fai,subroutines: move definition of trap clean_exit into task
dirinstall
.
[ Michael Tautschnig ]
* setup-storage: Bumped version number to 1.0.4
* setup-storage/Exec.pm: Use --timeout=10 instead of --timeout 10 to stay
compatible with etch (thanks Vincent Fortier)
* setup-storage/Sizes.pm: Immediately fail if partitions > 2TB are to be
created on msdos disk labels
* setup-storage: Enable debug mode if -d was given on the command line
* setup-storage/Fstab.pm, setup-storage/Commands.pm: Proper perl text
replace syntax and additional random initialization of partition
(thanks William Famy) (closes: #500821)
* examples/simple/scripts/GRUB/20-initramfs: Update the initramfs in case
lvm2 or mdadm have been installed.
* example/simple/classes/50-host-classes: Added hosts bear (class
LVM_XEN_SERVER) and puma (RAID_XEN_VIRTUAL)
* example/simple/disk_config/{LVM_XEN_SERVER,RAID_XEN_VIRTUAL}: Added
corresponding disk_config examples that have a large LVM and a software
RAID configured
* conf/NFSROOT, debian/control, setup-storage/Volumes.pm: Moving back to
Linux::LVM perl module for parsing LVM command output as #488205 has been
fixed.
* setup-storage/Parser.pm, setup-storage.8: Added and documented support for
glob patterns in device names (e.g., /dev/disk/by-id/scsi-*)
* setup-storage/Sizes.pm: Fail early, if a non-existing device is used in a
volume group.
* setup-storage/Commands.pm: Properly handle existing volume groups and only
extend them if the underlying devices are preserved, otherwise create them
anew.
* setup-storage/Volumes.pm, setup-storage/Parser.pm: Always write a new
disklabel, if no partition on the disk must be preserved
* setup-storage/Parser.pm, setup-storage/Commands.pm: Make sure that the
user hasn't configured spares/missing devices with RAID-0 and only add
--spare-devices if at least 1 is configured. Thanks Camille Barette.
(closes: #508192)
* setup-storage/Commands.pm: Use the proper id for telling the user about
preserved/resized partitions. (closes: #521290)
* setup-storage/Init.pm, disk-info: Added AOE etherd/ device names to
regular expressions (thanks Jean Spirat)
* setup-storage/Commands.pm: If the disk config is marked virtual, create
dummy commands to tell later commands that the devices exist
(closes: #508247)
* setup-storage/Parser.pm: Support :encrypt with all mountpoint
specifications
* setup-storage/Sizes.pm: Properly tell the user that the lower bound of a
parition size is already too high
* setup-storage/Commands.pm: Added debug output in command dependency sorter
* setup-storage/Parser.pm, setup-storage/Commands.pm: Make random
initialization of encrypted partitions configurable
* setup-storage.8: Document new encryption possibilities
* lib/get-config-dir-*: task_error requires the exit code of the
preceeding command as the second argument
* lib/subroutines-linux: The exit code of a command earlier in a pipe
must be read using $PIPESTATUS, not $? (closes: #444210)
* bin/faimond: Try to load Proc::Daemon only in case -d is given; if it
fails, print a helpful error message (closes: #513090)
* bin/setup-storage, setup-storage/Volumes.pm: When propagating preserve
markers also check whether the to-be-preserved volume is defined at all
(closes: #521153)
* setup-storage/Parser.pm, setup-storage/Commands.pm: Added support for
optional (pv|vg|lv|md)createopts
* man/setup-storage.8: Documented these new options
* Moved parsing of createopts,tuneopts to Parser.pm for simpler code and
better syntax checking (closes: #521172)
* setup-storage/Sizes.pm: Change die to warn in case a preserved partition
is not aligned to cylinder boundaries
* setup-storage/Parser.pm: Only test for mkfs.X if such a filesystem is to
be created (i.e., it will not be preserved)
* fai-gude.sgml: add hint how to avoid this bug (closes: #265973)
Checksums-Sha1:
2224aaa4e2e8fc1ee1d60b73669d578807d53113 1042 fai_3.2.18.dsc
7baf6dfdac097d5b567f918f13dd758a89ae75ae 270525 fai_3.2.18.tar.gz
b0506c2d6fd910c08d8ebcbfb1c51c9a60ffc58f 149306 fai-client_3.2.18_all.deb
7b429d24da237c54bb858fb2e67ffe0e6bd6e90f 571174 fai-doc_3.2.18_all.deb
7b813b356b089096337d540a00e1de833eeea040 52718 fai-server_3.2.18_all.deb
adef9e15f08e6de83df26283a82505517b6aa5e4 1904 fai-quickstart_3.2.18_all.deb
b41292202d40e615e826a6dfcbf12b02831f7e96 56118 fai-nfsroot_3.2.18_all.deb
Checksums-Sha256:
8f0daa93513a2a0f239715027f28fda2b7f41182d6bedf298b00546ed213a44d 1042 fai_3.2.18.dsc
f2ba18b5df4317c3db703ad1d465481a2743097001cdb81c1b813109a5869b08 270525 fai_3.2.18.tar.gz
c71197ddf9e930de9e38260f4bfdee4c08d878d5e8d391a90d052eb99021290c 149306 fai-client_3.2.18_all.deb
19bf2bda2a38b57566984c1732fdafac1d2a837308b8a7f7313e8ce2597b857b 571174 fai-doc_3.2.18_all.deb
92042496bff81251a4b1b5887394313f2fbf6b24fac4f4d6cb002fd118d8922d 52718 fai-server_3.2.18_all.deb
b79a86ef46534582126d784bb34cc3dc6bcf6d32a4c7eef569de7a34ef0d195f 1904 fai-quickstart_3.2.18_all.deb
79446913d570378af13d21c76f09729a24e831d1060f11852b344bf369c7e904 56118 fai-nfsroot_3.2.18_all.deb
Files:
18266ba47c436c83b926fa3016a8dd6f 1042 admin extra fai_3.2.18.dsc
a03920fd9a76ccb8c8422e51a02be462 270525 admin extra fai_3.2.18.tar.gz
ee6fa207813cfc5368758f2a348cee7b 149306 admin extra fai-client_3.2.18_all.deb
de52e05d11a761de28b966d59e302969 571174 doc extra fai-doc_3.2.18_all.deb
372587766d2ac5719d5e698490f23e9b 52718 admin extra fai-server_3.2.18_all.deb
c5f7cdd8fb3520810260233568e9f8d1 1904 admin extra fai-quickstart_3.2.18_all.deb
0dd4e4c623a7ae88d24ff9f1a83e08a6 56118 admin extra fai-nfsroot_3.2.18_all.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iD8DBQFJ7Fxz3BPlTqubZv0RAq7XAJ9aBhlB/lNGPzDWjx/6GP7mXGalggCfWge0
jx198QMNdN0yZRTR0HWvwFE=
=AlLD
-----END PGP SIGNATURE-----
Accepted:
fai-client_3.2.18_all.deb
to pool/main/f/fai/fai-client_3.2.18_all.deb
fai-doc_3.2.18_all.deb
to pool/main/f/fai/fai-doc_3.2.18_all.deb
fai-nfsroot_3.2.18_all.deb
to pool/main/f/fai/fai-nfsroot_3.2.18_all.deb
fai-quickstart_3.2.18_all.deb
to pool/main/f/fai/fai-quickstart_3.2.18_all.deb
fai-server_3.2.18_all.deb
to pool/main/f/fai/fai-server_3.2.18_all.deb
fai_3.2.18.dsc
to pool/main/f/fai/fai_3.2.18.dsc
fai_3.2.18.tar.gz
to pool/main/f/fai/fai_3.2.18.tar.gz
Reply to: