Accepted nslu2-utils 0.10+r71-1 (source all arm)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.7
Date: Sun, 5 Nov 2006 13:52:48 -0500
Source: nslu2-utils
Binary: slugimage nslu2-utils
Architecture: source arm all
Version: 0.10+r71-1
Distribution: unstable
Urgency: low
Maintainer: Joey Hess <joeyh@debian.org>
Changed-By: Joey Hess <joeyh@debian.org>
Description:
nslu2-utils - utilities and init scripts for the Linksys NSLU2
slugimage - NSUL2 firmware image manipulation utility
Changes:
nslu2-utils (0.10+r71-1) unstable; urgency=low
.
[ Joey Hess ]
* Add note to README.Debian about using avahi-autoipd.
* Since initramfs-tools ignores hook script nonzero exit codes, deal with
errors differently -- print a warning message, instruct the user to hit
ctrl-c, and pause for user input.
* Remove NSLU2_IXP400_REQUIRED and /etc/nslu2.conf, since the user can just
hit enter to force building an initramfs missing the kernel module.
* Depend on flash-kernel, replace nslu2-flashkernel with a wrapper that
calls it; nslu2-flashkernel is deprecated and /etc/kernel-img.conf
should be modified to use flash-kernel.
* Support the debian 2.6.18-1-ixp4xx kernel, which as of version 2.6.18-4,
includes a free IXP ethernet driver, that needs only some non-free
firmware. Add code to check for the firmware if building an initramfs for
this version of the kernel.
.
[ Martin Michlmayr ]
* In nslu2-flashkernel check whether the APEX flash partition exists,
otherwise give a link to upgrade instructions.
.
[ Joey Hess ]
* Add code to the postinst to run flash-kernel on upgrade, IFF the APEX
flash partition exists. It's not necessary to run it on fresh install
since flash-kernel-installer in d-i will handle that.
* Update slugos-init files to r71.
* Add udev rule file to create /dev/rtc0 -> /dev/rtc symlink.
* Add /etc/rcS.d/S10nslu2-rtc.sh, which modprobes rtc-dev before hwclock.sh
runs.
* Use the heartbeat led trigger for cpu-idle.
* For the user led state, set ready to on, and status to cpu-idle, this
looks better than the upstream setting of ready to cpu-idle and status to
off.
* Fix an unnecessary nonzero exit from the leds program.
* Include leds.8 in the package.
* Modified zleds startup script to turn on the disk led. For now
it always turns on disk 1.
* Document led states in README.Debian.
Files:
a560f44699c8e7c6798b6fa87f6c7c73 742 admin extra nslu2-utils_0.10+r71-1.dsc
4f4d88edf0367dfd70a817c749d33e7c 31538 admin extra nslu2-utils_0.10+r71.orig.tar.gz
f61c0e7e516b332c98a63f37d34bec04 20517 admin extra nslu2-utils_0.10+r71-1.diff.gz
120667b265d850d155e36e272e086795 17186 admin extra slugimage_0.10+r71-1_all.deb
6701731c127d65b621cbb3eea54813a5 14124 admin extra nslu2-utils_0.10+r71-1_arm.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFTj3d2tp5zXiKP0wRAi+9AJ9GfyN1kUnWAyRswj1FByKPxw3zdACgsFtB
6EIWm62HUKVHjTDjGa4pyo4=
=O9Iy
-----END PGP SIGNATURE-----
Accepted:
nslu2-utils_0.10+r71-1.diff.gz
to pool/main/n/nslu2-utils/nslu2-utils_0.10+r71-1.diff.gz
nslu2-utils_0.10+r71-1.dsc
to pool/main/n/nslu2-utils/nslu2-utils_0.10+r71-1.dsc
nslu2-utils_0.10+r71-1_arm.deb
to pool/main/n/nslu2-utils/nslu2-utils_0.10+r71-1_arm.deb
nslu2-utils_0.10+r71.orig.tar.gz
to pool/main/n/nslu2-utils/nslu2-utils_0.10+r71.orig.tar.gz
slugimage_0.10+r71-1_all.deb
to pool/main/n/nslu2-utils/slugimage_0.10+r71-1_all.deb
Reply to: