Installed setserial 2.17-11 (source i386)

[Gordon Russell <g.russell@dcs.napier.ac.uk>]

Installed:
setserial_2.17-11.diff.gz
  to dists/potato/main/source/base/setserial_2.17-11.diff.gz
  replacing setserial_2.17-10.diff.gz
setserial_2.17-11.diff.gz
  to dists/woody/main/source/base/setserial_2.17-11.diff.gz
  replacing setserial_2.17-10.diff.gz
setserial_2.17-11.dsc
  to dists/potato/main/source/base/setserial_2.17-11.dsc
  replacing setserial_2.17-10.dsc
setserial_2.17-11.dsc
  to dists/woody/main/source/base/setserial_2.17-11.dsc
  replacing setserial_2.17-10.dsc
setserial_2.17-11_i386.deb
  to dists/potato/main/binary-i386/base/setserial_2.17-11.deb
  replacing setserial_2.17-10.deb
setserial_2.17-11_i386.deb
  to dists/woody/main/binary-i386/base/setserial_2.17-11.deb
  replacing setserial_2.17-10.deb


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.6
Date: Wed,  3 May 2000 10:59:47 +0100
Source: setserial
Binary: setserial
Architecture: source i386
Version: 2.17-11
Distribution: frozen unstable
Urgency: low
Maintainer: Gordon Russell <g.russell@dcs.napier.ac.uk>
Description: 
 setserial  - Controls configuration of serial ports.
Closes: 62525 63448
Changes: 
 setserial (2.17-11) frozen unstable; urgency=low
 .
   * The grep commands in the postinst could cause the postinst
     to fail if there were no serial ports detected by setserial. This
     actually appears to be a possibility for the SPARC architecture, so
     I have protected against this using IF testing.
     (closes: #63448)
   * An additional issue raised by the above bug report is if you have an old
     serial.conf file and you have not yet gone through the process of being
     asked if you want autosave, then the answer to the question is basically
     ignored. I have fixed this in the postinst to work better...
   * I can now make use of dpkg-reconfigure, and it appears to work.
   * Unfortunately I had to add a new depconf template, and stop using one
     of the older ones. This means that many of you will have to respond
     to a question when you update to this setserial version. Sorry about
     that... You should find the default answer adequate. For now, I have
     set its priority to "medium". Should this be "low"?
   * Another side-effect of moving to debconf - stdout output in postrm causes
     the postrm to fail. I have removed all output to stdout and replaced it
     where necessary to stderr. Hopefully it will work a lot better now.
     Thanks to Joey Hess for giving me the fix...
     (closes: #62525)
Files: 
 080cb5d5d5c0611149939fec37bd7957 606 base required setserial_2.17-11.dsc
 12ae79ed0cf4e6a16a062bdd4dd27463 22055 base required setserial_2.17-11.diff.gz
 a86cfb45179b831f603b03c5904ce9db 34128 base required setserial_2.17-11_i386.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.1 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjkRd6cACgkQsbjrHwXvAeNyuACfVWu6yoG0WX64ztg0EjD9Lw63
LTMAnRRMxvJoCk5rIXH7dqtxnV8VKwRC
=Ffez
-----END PGP SIGNATURE-----