[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#601957: common-lisp-controller: config file conflict when upgrading from lenny



Package: common-lisp-controller
Version: 7.4
Severity: serious

Hi,

Installing this package in lenny and upgrading to squeeze causes to run
into a configuration file issue. See log below.

- Lucas

IT-Header: common-lisp-controller lsqueeze64-instest / Sun Oct 31 12:21:48 +0100 2010
-- Checking if the package is already installed: NO
-- Finding version: common-lisp-controller 7.4
-- Finding depends: adduser net-tools ifupdown libgdbm3 netbase perl-modules perl binfmt-support realpath cl-asdf sbcl
-- Installing depends: OK
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Starting
   Starting 2
   Done
   The following extra packages will be installed:
     common-lisp-controller
   Suggested packages:
     iproute dhcp3-client dhcp-client ppp perl-doc libterm-readline-gnu-perl
     libterm-readline-perl-perl make sbcl-doc sbcl-source slime
   The following NEW packages will be installed:
     adduser binfmt-support cl-asdf common-lisp-controller ifupdown libgdbm3
     net-tools netbase perl perl-modules realpath sbcl
   0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded.
   Need to get 19.7 MB of archives.
   After this operation, 91.2 MB of additional disk space will be used.
   Get:1 http://localhost/debian/ squeeze/main adduser all 3.112 [157 kB]
   Get:2 http://localhost/debian/ squeeze/main net-tools amd64 1.60-23 [337 kB]
   Get:3 http://localhost/debian/ squeeze/main ifupdown amd64 0.6.10 [49.4 kB]
   Get:4 http://localhost/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB]
   Get:5 http://localhost/debian/ squeeze/main netbase all 4.42 [20.4 kB]
   Get:6 http://localhost/debian/ squeeze/main perl-modules all 5.10.1-15 [3481 kB]
   Get:7 http://localhost/debian/ squeeze/main perl amd64 5.10.1-15 [4461 kB]
   Get:8 http://localhost/debian/ squeeze/main binfmt-support all 1.2.18 [23.1 kB]
   Get:9 http://localhost/debian/ squeeze/main realpath amd64 1.15 [16.2 kB]
   Get:10 http://localhost/debian/ squeeze/main common-lisp-controller all 7.4 [34.5 kB]
   Get:11 http://localhost/debian/ squeeze/main cl-asdf all 2:2.004-1 [503 kB]
   Get:12 http://localhost/debian/ squeeze/main sbcl amd64 1:1.0.40.0-2 [10.6 MB]
   Preconfiguring packages ...
   Fetched 19.7 MB in 0s (74.9 MB/s)
   Selecting previously deselected package adduser.
   (Reading database ... 6239 files and directories currently installed.)
   Unpacking adduser (from .../archives/adduser_3.112_all.deb) ...
   Selecting previously deselected package net-tools.
   Unpacking net-tools (from .../net-tools_1.60-23_amd64.deb) ...
   Selecting previously deselected package ifupdown.
   Unpacking ifupdown (from .../ifupdown_0.6.10_amd64.deb) ...
   Selecting previously deselected package libgdbm3.
   Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ...
   Selecting previously deselected package netbase.
   Unpacking netbase (from .../archives/netbase_4.42_all.deb) ...
   Selecting previously deselected package perl-modules.
   Unpacking perl-modules (from .../perl-modules_5.10.1-15_all.deb) ...
   Selecting previously deselected package perl.
   Unpacking perl (from .../perl_5.10.1-15_amd64.deb) ...
   Selecting previously deselected package binfmt-support.
   Unpacking binfmt-support (from .../binfmt-support_1.2.18_all.deb) ...
   Selecting previously deselected package realpath.
   Unpacking realpath (from .../realpath_1.15_amd64.deb) ...
   Selecting previously deselected package common-lisp-controller.
   Unpacking common-lisp-controller (from .../common-lisp-controller_7.4_all.deb) ...
   adduser: `/etc/adduser.conf' does not exist. Using defaults.
   Warning: The home dir /usr/share/common-lisp/ you specified can't be accessed: No such file or directory
   Adding system user `cl-builder' (UID 105) ...
   Adding new group `cl-builder' (GID 108) ...
   Adding new user `cl-builder' (UID 105) with group `cl-builder' ...
   Not creating home directory `/usr/share/common-lisp/'.
   Selecting previously deselected package cl-asdf.
   Unpacking cl-asdf (from .../cl-asdf_2%3a2.004-1_all.deb) ...
   Selecting previously deselected package sbcl.
   Unpacking sbcl (from .../sbcl_1%3a1.0.40.0-2_amd64.deb) ...
   Setting up adduser (3.112) ...
   Setting up net-tools (1.60-23) ...
   Setting up ifupdown (0.6.10) ...
   ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces
   ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces
   Setting up libgdbm3 (1.8.3-9) ...
   Setting up netbase (4.42) ...
   Setting up realpath (1.15) ...
   Setting up perl-modules (5.10.1-15) ...
   Setting up perl (5.10.1-15) ...
   update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode.
   Setting up binfmt-support (1.2.18) ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   invoke-rc.d: policy-rc.d denied execution of start.
   Setting up common-lisp-controller (7.4) ...
   Reinstalling for sbcl
   Recompiling Common Lisp Controller for sbcl
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47943680 bytes from the dynamic space at 0x1000000000
   done]
   
   Done rebuilding
   Setting up sbcl (1:1.0.40.0-2) ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47935488 bytes from the dynamic space at 0x1000000000
   done]
   Setting up cl-asdf (2:2.004-1) ...
   Reinstalling for sbcl
   Recompiling Common Lisp Controller for sbcl
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47935488 bytes from the dynamic space at 0x1000000000
   done]
   
   Done rebuilding
-- Installing the package after its depends: OK
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Starting
   Starting 2
   Done
   common-lisp-controller is already the newest version.
   common-lisp-controller set to manually installed.
   0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
-- Installing the package together with its depends: OK
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Starting
   Starting 2
   Done
   The following extra packages will be installed:
     adduser binfmt-support cl-asdf ifupdown libgdbm3 net-tools netbase perl
     perl-modules realpath sbcl
   Suggested packages:
     iproute dhcp3-client dhcp-client ppp perl-doc libterm-readline-gnu-perl
     libterm-readline-perl-perl make sbcl-doc sbcl-source slime
   The following NEW packages will be installed:
     adduser binfmt-support cl-asdf common-lisp-controller ifupdown libgdbm3
     net-tools netbase perl perl-modules realpath sbcl
   0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded.
   Need to get 19.7 MB of archives.
   After this operation, 91.2 MB of additional disk space will be used.
   Get:1 http://localhost/debian/ squeeze/main adduser all 3.112 [157 kB]
   Get:2 http://localhost/debian/ squeeze/main net-tools amd64 1.60-23 [337 kB]
   Get:3 http://localhost/debian/ squeeze/main ifupdown amd64 0.6.10 [49.4 kB]
   Get:4 http://localhost/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB]
   Get:5 http://localhost/debian/ squeeze/main netbase all 4.42 [20.4 kB]
   Get:6 http://localhost/debian/ squeeze/main perl-modules all 5.10.1-15 [3481 kB]
   Get:7 http://localhost/debian/ squeeze/main perl amd64 5.10.1-15 [4461 kB]
   Get:8 http://localhost/debian/ squeeze/main binfmt-support all 1.2.18 [23.1 kB]
   Get:9 http://localhost/debian/ squeeze/main realpath amd64 1.15 [16.2 kB]
   Get:10 http://localhost/debian/ squeeze/main common-lisp-controller all 7.4 [34.5 kB]
   Get:11 http://localhost/debian/ squeeze/main cl-asdf all 2:2.004-1 [503 kB]
   Get:12 http://localhost/debian/ squeeze/main sbcl amd64 1:1.0.40.0-2 [10.6 MB]
   Preconfiguring packages ...
   Fetched 19.7 MB in 0s (74.6 MB/s)
   Selecting previously deselected package adduser.
   (Reading database ... 6239 files and directories currently installed.)
   Unpacking adduser (from .../archives/adduser_3.112_all.deb) ...
   Selecting previously deselected package net-tools.
   Unpacking net-tools (from .../net-tools_1.60-23_amd64.deb) ...
   Selecting previously deselected package ifupdown.
   Unpacking ifupdown (from .../ifupdown_0.6.10_amd64.deb) ...
   Selecting previously deselected package libgdbm3.
   Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ...
   Selecting previously deselected package netbase.
   Unpacking netbase (from .../archives/netbase_4.42_all.deb) ...
   Selecting previously deselected package perl-modules.
   Unpacking perl-modules (from .../perl-modules_5.10.1-15_all.deb) ...
   Selecting previously deselected package perl.
   Unpacking perl (from .../perl_5.10.1-15_amd64.deb) ...
   Selecting previously deselected package binfmt-support.
   Unpacking binfmt-support (from .../binfmt-support_1.2.18_all.deb) ...
   Selecting previously deselected package realpath.
   Unpacking realpath (from .../realpath_1.15_amd64.deb) ...
   Selecting previously deselected package common-lisp-controller.
   Unpacking common-lisp-controller (from .../common-lisp-controller_7.4_all.deb) ...
   adduser: `/etc/adduser.conf' does not exist. Using defaults.
   Warning: The home dir /usr/share/common-lisp/ you specified can't be accessed: No such file or directory
   Adding system user `cl-builder' (UID 105) ...
   Adding new group `cl-builder' (GID 108) ...
   Adding new user `cl-builder' (UID 105) with group `cl-builder' ...
   Not creating home directory `/usr/share/common-lisp/'.
   Selecting previously deselected package cl-asdf.
   Unpacking cl-asdf (from .../cl-asdf_2%3a2.004-1_all.deb) ...
   Selecting previously deselected package sbcl.
   Unpacking sbcl (from .../sbcl_1%3a1.0.40.0-2_amd64.deb) ...
   Setting up adduser (3.112) ...
   Setting up net-tools (1.60-23) ...
   Setting up ifupdown (0.6.10) ...
   ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces
   ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces
   Setting up libgdbm3 (1.8.3-9) ...
   Setting up netbase (4.42) ...
   Setting up realpath (1.15) ...
   Setting up perl-modules (5.10.1-15) ...
   Setting up perl (5.10.1-15) ...
   update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode.
   Setting up binfmt-support (1.2.18) ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   invoke-rc.d: policy-rc.d denied execution of start.
   Setting up common-lisp-controller (7.4) ...
   Reinstalling for sbcl
   Recompiling Common Lisp Controller for sbcl
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47943680 bytes from the dynamic space at 0x1000000000
   done]
   
   Done rebuilding
   Setting up sbcl (1:1.0.40.0-2) ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47935488 bytes from the dynamic space at 0x1000000000
   done]
   Setting up cl-asdf (2:2.004-1) ...
   Reinstalling for sbcl
   Recompiling Common Lisp Controller for sbcl
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47935488 bytes from the dynamic space at 0x1000000000
   done]
   
   Done rebuilding
-- Installing the package with aptitude: OK
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Initializing package states...
   Writing extended state information...
   The following NEW packages will be installed:
     adduser{a} binfmt-support{a} cl-asdf{a} common-lisp-controller 
     realpath{a} sbcl{a} 
   0 packages upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
   Need to get 11.3 MB of archives. After unpacking 54.5 MB will be used.
   Writing extended state information...
   Get:1 http://localhost/debian/ squeeze/main adduser all 3.112 [157 kB]
   Get:2 http://localhost/debian/ squeeze/main binfmt-support all 1.2.18 [23.1 kB]
   Get:3 http://localhost/debian/ squeeze/main realpath amd64 1.15 [16.2 kB]
   Get:4 http://localhost/debian/ squeeze/main common-lisp-controller all 7.4 [34.5 kB]
   Get:5 http://localhost/debian/ squeeze/main cl-asdf all 2:2.004-1 [503 kB]
   Get:6 http://localhost/debian/ squeeze/main sbcl amd64 1:1.0.40.0-2 [10.6 MB]
   Preconfiguring packages ...
   Fetched 11.3 MB in 0s (70.1 MB/s)
   Selecting previously deselected package adduser.
   (Reading database ... 10359 files and directories currently installed.)
   Unpacking adduser (from .../archives/adduser_3.112_all.deb) ...
   Selecting previously deselected package binfmt-support.
   Unpacking binfmt-support (from .../binfmt-support_1.2.18_all.deb) ...
   Selecting previously deselected package realpath.
   Unpacking realpath (from .../realpath_1.15_amd64.deb) ...
   Selecting previously deselected package common-lisp-controller.
   Unpacking common-lisp-controller (from .../common-lisp-controller_7.4_all.deb) ...
   adduser: `/etc/adduser.conf' does not exist. Using defaults.
   Warning: The home dir /usr/share/common-lisp/ you specified can't be accessed: No such file or directory
   Adding system user `cl-builder' (UID 105) ...
   Adding new group `cl-builder' (GID 108) ...
   Adding new user `cl-builder' (UID 105) with group `cl-builder' ...
   Not creating home directory `/usr/share/common-lisp/'.
   Selecting previously deselected package cl-asdf.
   Unpacking cl-asdf (from .../cl-asdf_2%3a2.004-1_all.deb) ...
   Selecting previously deselected package sbcl.
   Unpacking sbcl (from .../sbcl_1%3a1.0.40.0-2_amd64.deb) ...
   Setting up adduser (3.112) ...
   Setting up binfmt-support (1.2.18) ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   invoke-rc.d: policy-rc.d denied execution of start.
   Setting up realpath (1.15) ...
   Setting up common-lisp-controller (7.4) ...
   Reinstalling for sbcl
   Recompiling Common Lisp Controller for sbcl
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47943680 bytes from the dynamic space at 0x1000000000
   done]
   
   Done rebuilding
   Setting up sbcl (1:1.0.40.0-2) ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47935488 bytes from the dynamic space at 0x1000000000
   done]
   Setting up cl-asdf (2:2.004-1) ...
   Reinstalling for sbcl
   Recompiling Common Lisp Controller for sbcl
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47935488 bytes from the dynamic space at 0x1000000000
   done]
   
   Done rebuilding
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Reading extended state information...
   Initializing package states...
   Writing extended state information...
-- Installing the package together with its depends and recommends: OK
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Starting
   Starting 2
   Done
   The following extra packages will be installed:
     adduser binfmt-support cl-asdf ifupdown libgdbm3 net-tools netbase perl
     perl-modules realpath sbcl
   Suggested packages:
     iproute dhcp3-client dhcp-client ppp perl-doc libterm-readline-gnu-perl
     libterm-readline-perl-perl make sbcl-doc sbcl-source slime
   The following NEW packages will be installed:
     adduser binfmt-support cl-asdf common-lisp-controller ifupdown libgdbm3
     net-tools netbase perl perl-modules realpath sbcl
   0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded.
   Need to get 19.7 MB of archives.
   After this operation, 91.2 MB of additional disk space will be used.
   Get:1 http://localhost/debian/ squeeze/main adduser all 3.112 [157 kB]
   Get:2 http://localhost/debian/ squeeze/main net-tools amd64 1.60-23 [337 kB]
   Get:3 http://localhost/debian/ squeeze/main ifupdown amd64 0.6.10 [49.4 kB]
   Get:4 http://localhost/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB]
   Get:5 http://localhost/debian/ squeeze/main netbase all 4.42 [20.4 kB]
   Get:6 http://localhost/debian/ squeeze/main perl-modules all 5.10.1-15 [3481 kB]
   Get:7 http://localhost/debian/ squeeze/main perl amd64 5.10.1-15 [4461 kB]
   Get:8 http://localhost/debian/ squeeze/main binfmt-support all 1.2.18 [23.1 kB]
   Get:9 http://localhost/debian/ squeeze/main realpath amd64 1.15 [16.2 kB]
   Get:10 http://localhost/debian/ squeeze/main common-lisp-controller all 7.4 [34.5 kB]
   Get:11 http://localhost/debian/ squeeze/main cl-asdf all 2:2.004-1 [503 kB]
   Get:12 http://localhost/debian/ squeeze/main sbcl amd64 1:1.0.40.0-2 [10.6 MB]
   Preconfiguring packages ...
   Fetched 19.7 MB in 0s (74.6 MB/s)
   Selecting previously deselected package adduser.
   (Reading database ... 6239 files and directories currently installed.)
   Unpacking adduser (from .../archives/adduser_3.112_all.deb) ...
   Selecting previously deselected package net-tools.
   Unpacking net-tools (from .../net-tools_1.60-23_amd64.deb) ...
   Selecting previously deselected package ifupdown.
   Unpacking ifupdown (from .../ifupdown_0.6.10_amd64.deb) ...
   Selecting previously deselected package libgdbm3.
   Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ...
   Selecting previously deselected package netbase.
   Unpacking netbase (from .../archives/netbase_4.42_all.deb) ...
   Selecting previously deselected package perl-modules.
   Unpacking perl-modules (from .../perl-modules_5.10.1-15_all.deb) ...
   Selecting previously deselected package perl.
   Unpacking perl (from .../perl_5.10.1-15_amd64.deb) ...
   Selecting previously deselected package binfmt-support.
   Unpacking binfmt-support (from .../binfmt-support_1.2.18_all.deb) ...
   Selecting previously deselected package realpath.
   Unpacking realpath (from .../realpath_1.15_amd64.deb) ...
   Selecting previously deselected package common-lisp-controller.
   Unpacking common-lisp-controller (from .../common-lisp-controller_7.4_all.deb) ...
   adduser: `/etc/adduser.conf' does not exist. Using defaults.
   Warning: The home dir /usr/share/common-lisp/ you specified can't be accessed: No such file or directory
   Adding system user `cl-builder' (UID 105) ...
   Adding new group `cl-builder' (GID 108) ...
   Adding new user `cl-builder' (UID 105) with group `cl-builder' ...
   Not creating home directory `/usr/share/common-lisp/'.
   Selecting previously deselected package cl-asdf.
   Unpacking cl-asdf (from .../cl-asdf_2%3a2.004-1_all.deb) ...
   Selecting previously deselected package sbcl.
   Unpacking sbcl (from .../sbcl_1%3a1.0.40.0-2_amd64.deb) ...
   Setting up adduser (3.112) ...
   Setting up net-tools (1.60-23) ...
   Setting up ifupdown (0.6.10) ...
   ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces
   ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces
   Setting up libgdbm3 (1.8.3-9) ...
   Setting up netbase (4.42) ...
   Setting up realpath (1.15) ...
   Setting up perl-modules (5.10.1-15) ...
   Setting up perl (5.10.1-15) ...
   update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode.
   Setting up binfmt-support (1.2.18) ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   invoke-rc.d: policy-rc.d denied execution of start.
   Setting up common-lisp-controller (7.4) ...
   Reinstalling for sbcl
   Recompiling Common Lisp Controller for sbcl
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47943680 bytes from the dynamic space at 0x1000000000
   done]
   
   Done rebuilding
   Setting up sbcl (1:1.0.40.0-2) ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47935488 bytes from the dynamic space at 0x1000000000
   done]
   Setting up cl-asdf (2:2.004-1) ...
   Reinstalling for sbcl
   Recompiling Common Lisp Controller for sbcl
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into sbcl-new.core:
   writing 6352 bytes from the read-only space at 0x20000000
   writing 4064 bytes from the static space at 0x20100000
   writing 47935488 bytes from the dynamic space at 0x1000000000
   done]
   
   Done rebuilding
-- Removing the package: OK
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Starting
   Starting 2
   Investigating (0) sbcl [ amd64 ] < 1:1.0.40.0-2 > ( lisp )
   Broken sbcl:amd64 Depends on common-lisp-controller [ amd64 ] < 7.4 > ( lisp ) (>= 5.11)
     Considering common-lisp-controller:amd64 10002 as a solution to sbcl:amd64 1
     Removing sbcl:amd64 rather than change common-lisp-controller:amd64
   Investigating (0) cl-asdf [ amd64 ] < 2:2.004-1 > ( lisp )
   Broken cl-asdf:amd64 Depends on common-lisp-controller [ amd64 ] < 7.4 > ( lisp ) (>= 5.11)
     Considering common-lisp-controller:amd64 10002 as a solution to cl-asdf:amd64 0
     Removing cl-asdf:amd64 rather than change common-lisp-controller:amd64
   Done
   The following packages were automatically installed and are no longer required:
     realpath perl perl-modules libgdbm3 netbase binfmt-support ifupdown
     net-tools adduser
   Use 'apt-get autoremove' to remove them.
   The following packages will be REMOVED:
     cl-asdf common-lisp-controller sbcl
   0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded.
   After this operation, 53.3 MB disk space will be freed.
   (Reading database ... 8200 files and directories currently installed.)
   Removing sbcl ...
   Removing cl-asdf ...
   Removing common-lisp-controller ...
-- Removing all dependencies: OK
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Starting
   Starting 2
   Investigating (0) perl-modules [ amd64 ] < 5.10.1-15 > ( perl )
   Broken perl-modules:amd64 Depends on perl [ amd64 ] < 5.10.1-15 > ( perl ) (>= 5.10.1-1)
     Considering perl:amd64 10001 as a solution to perl-modules:amd64 2
     Removing perl-modules:amd64 rather than change perl:amd64
   Done
   Package cl-asdf is not installed, so not removed
   Package sbcl is not installed, so not removed
   The following package was automatically installed and is no longer required:
     adduser
   Use 'apt-get autoremove' to remove them.
   The following packages will be REMOVED:
     binfmt-support ifupdown libgdbm3 net-tools netbase perl perl-modules
     realpath
   0 upgraded, 0 newly installed, 8 to remove and 0 not upgraded.
   After this operation, 37.0 MB disk space will be freed.
   (Reading database ... 7777 files and directories currently installed.)
   Removing binfmt-support ...
   invoke-rc.d: policy-rc.d denied execution of stop.
   Removing ifupdown ...
   Removing net-tools ...
   Removing netbase ...
   Removing realpath ...
   Removing perl ...
   Removing perl-modules ...
   Removing libgdbm3 ...
-- Purging package: OK
   (Reading database ... 6325 files and directories currently installed.)
   Removing common-lisp-controller ...
   Purging configuration files for common-lisp-controller ...
-- Now testing upgrade from llenny64-instest.
-- Finding version in llenny64-instest: common-lisp-controller 6.17
-- Installing common-lisp-controller in llenny64-instest: OK
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Starting
   Starting 2
   Done
   The following extra packages will be installed:
     binfmt-support cl-asdf ifupdown libgdbm3 net-tools netbase perl perl-modules
     realpath sbcl
   Suggested packages:
     iproute dhcp3-client dhcp-client ppp perl-doc libterm-readline-gnu-perl
     libterm-readline-perl-perl sbcl-doc sbcl-source slime
   The following NEW packages will be installed:
     binfmt-support cl-asdf common-lisp-controller ifupdown libgdbm3 net-tools
     netbase perl perl-modules realpath sbcl
   0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded.
   Need to get 18.7MB of archives.
   After this operation, 79.9MB of additional disk space will be used.
   Get:1 http://localhost lenny/main net-tools 1.60-22 [286kB]
   Get:2 http://localhost lenny/main ifupdown 0.6.8+nmu1 [48.0kB]
   Get:3 http://localhost lenny/main libgdbm3 1.8.3-3 [23.4kB]
   Get:4 http://localhost lenny/main netbase 4.34 [18.5kB]
   Get:5 http://localhost lenny/main perl-modules 5.10.0-19lenny2 [3198kB]
   Get:6 http://localhost lenny/main perl 5.10.0-19lenny2 [5220kB]
   Get:7 http://localhost lenny/main binfmt-support 1.2.11 [21.4kB]
   Get:8 http://localhost lenny/main cl-asdf 1.111-1 [211kB]
   Get:9 http://localhost lenny/main realpath 1.12 [7452B]
   Get:10 http://localhost lenny/main common-lisp-controller 6.17 [32.0kB]
   Get:11 http://localhost lenny/main sbcl 1:1.0.18.0-2 [9666kB]
   Preconfiguring packages ...
   Fetched 18.7MB in 0s (73.7MB/s)
   Selecting previously deselected package net-tools.
   (Reading database ... 5924 files and directories currently installed.)
   Unpacking net-tools (from .../net-tools_1.60-22_amd64.deb) ...
   Selecting previously deselected package ifupdown.
   Unpacking ifupdown (from .../ifupdown_0.6.8+nmu1_amd64.deb) ...
   Selecting previously deselected package libgdbm3.
   Unpacking libgdbm3 (from .../libgdbm3_1.8.3-3_amd64.deb) ...
   Selecting previously deselected package netbase.
   Unpacking netbase (from .../archives/netbase_4.34_all.deb) ...
   Selecting previously deselected package perl-modules.
   Unpacking perl-modules (from .../perl-modules_5.10.0-19lenny2_all.deb) ...
   Selecting previously deselected package perl.
   Unpacking perl (from .../perl_5.10.0-19lenny2_amd64.deb) ...
   Selecting previously deselected package binfmt-support.
   Unpacking binfmt-support (from .../binfmt-support_1.2.11_all.deb) ...
   Selecting previously deselected package cl-asdf.
   Unpacking cl-asdf (from .../cl-asdf_1.111-1_all.deb) ...
   Selecting previously deselected package realpath.
   Unpacking realpath (from .../realpath_1.12_amd64.deb) ...
   Selecting previously deselected package common-lisp-controller.
   Unpacking common-lisp-controller (from .../common-lisp-controller_6.17_all.deb) ...
   Selecting previously deselected package sbcl.
   Unpacking sbcl (from .../sbcl_1%3a1.0.18.0-2_amd64.deb) ...
   Setting up net-tools (1.60-22) ...
   Setting up ifupdown (0.6.8+nmu1) ...
   ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces
   ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces
   Setting up libgdbm3 (1.8.3-3) ...
   Setting up netbase (4.34) ...
   Setting up cl-asdf (1.111-1) ...
   Reinstalling for sbcl
   Recompiling Common Lisp Controller for sbcl
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V5 in DEFUN
   STYLE-WARNING: redefining COMPILE-COMMON-LISP-CONTROLLER-V5 in DEFUN
   STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V4 in DEFUN
   STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER in DEFUN
   ; loading system definition from /usr/lib/sbcl/sb-grovel/sb-grovel.asd into
   ; #<PACKAGE "ASDF1">
   ; registering #<SYSTEM SB-GROVEL {1002C883F1}> as SB-GROVEL
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into /usr/lib/sbcl/sbcl-new.core:
   writing 6224 bytes from the read-only space at 0x20000000
   writing 3872 bytes from the static space at 0x20100000
   writing 40280064 bytes from the dynamic space at 0x1000000000
   done]
   
   Done rebuilding
   Setting up realpath (1.12) ...
   Setting up perl-modules (5.10.0-19lenny2) ...
   Setting up perl (5.10.0-19lenny2) ...
   Setting up binfmt-support (1.2.11) ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   Setting up common-lisp-controller (6.17) ...
   Reinstalling for sbcl
   Recompiling Common Lisp Controller for sbcl
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V5 in DEFUN
   STYLE-WARNING: redefining COMPILE-COMMON-LISP-CONTROLLER-V5 in DEFUN
   STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V4 in DEFUN
   STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER in DEFUN
   ; loading system definition from /usr/lib/sbcl/sb-grovel/sb-grovel.asd into
   ; #<PACKAGE "ASDF1">
   ; registering #<SYSTEM SB-GROVEL {1002C85B81}> as SB-GROVEL
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into /usr/lib/sbcl/sbcl-new.core:
   writing 6224 bytes from the read-only space at 0x20000000
   writing 3872 bytes from the static space at 0x20100000
   writing 40280064 bytes from the dynamic space at 0x1000000000
   done]
   
   Done rebuilding
   Setting up sbcl (1:1.0.18.0-2) ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   /usr/lib/common-lisp/bin/sbcl.sh loading and dumping clc.
   STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V5 in DEFUN
   STYLE-WARNING: redefining COMPILE-COMMON-LISP-CONTROLLER-V5 in DEFUN
   STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER-V4 in DEFUN
   STYLE-WARNING: redefining INIT-COMMON-LISP-CONTROLLER in DEFUN
   ; loading system definition from /usr/lib/sbcl/sb-grovel/sb-grovel.asd into
   ; #<PACKAGE "ASDF1">
   ; registering #<SYSTEM SB-GROVEL {1002C9FB41}> as SB-GROVEL
   
   [undoing binding stack and other enclosing state... done]
   [saving current Lisp image into /usr/lib/sbcl/sbcl-new.core:
   writing 6224 bytes from the read-only space at 0x20000000
   writing 3872 bytes from the static space at 0x20100000
   writing 40275968 bytes from the dynamic space at 0x1000000000
   done]
-- Upgrading distribution: FAILED
   ## Updating /etc/apt/sources.list...
   ## Running apt-get update...
   Get:1 http://localhost squeeze Release.gpg [835B]
   Get:2 http://localhost squeeze Release [89.9kB]
   Get:3 http://localhost squeeze/main Packages [8662kB]
   Get:4 http://localhost squeeze/main Sources [4854kB]
   Fetched 13.6MB in 0s (14.8MB/s)
   Reading package lists...
   ## Running apt-get -y install apt...
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Starting
   Starting 2
   Investigating apt-utils
   Package apt-utils has broken dep on libdb4.8
     Considering libdb4.8 1 as a solution to apt-utils 4
     Re-Instated libdb4.8
     Re-Instated apt-utils
   Done
   The following extra packages will be installed:
     apt-utils gcc-4.4-base libdb4.8 libstdc++6
   Suggested packages:
     aptitude synaptic wajig dpkg-dev apt-doc bzip2 python-apt
   The following NEW packages will be installed:
     gcc-4.4-base libdb4.8
   The following packages will be upgraded:
     apt apt-utils libstdc++6
   3 upgraded, 2 newly installed, 0 to remove and 78 not upgraded.
   Need to get 3572kB of archives.
   After this operation, 2830kB of additional disk space will be used.
   Get:1 http://localhost squeeze/main gcc-4.4-base 4.4.5-4 [122kB]
   Get:2 http://localhost squeeze/main libstdc++6 4.4.5-4 [341kB]
   Get:3 http://localhost squeeze/main libdb4.8 4.8.30-2 [696kB]
   Get:4 http://localhost squeeze/main apt-utils 0.8.6 [271kB]
   Get:5 http://localhost squeeze/main apt 0.8.6 [2143kB]
   Fetched 3572kB in 0s (58.5MB/s)
   Selecting previously deselected package gcc-4.4-base.
   (Reading database ... 7561 files and directories currently installed.)
   Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.5-4_amd64.deb) ...
   Setting up gcc-4.4-base (4.4.5-4) ...
   (Reading database ... 7569 files and directories currently installed.)
   Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.5-4_amd64.deb) ...
   Unpacking replacement libstdc++6 ...
   Setting up libstdc++6 (4.4.5-4) ...
   Selecting previously deselected package libdb4.8.
   (Reading database ... 7569 files and directories currently installed.)
   Unpacking libdb4.8 (from .../libdb4.8_4.8.30-2_amd64.deb) ...
   Preparing to replace apt-utils 0.7.20.2+lenny2 (using .../apt-utils_0.8.6_amd64.deb) ...
   Unpacking replacement apt-utils ...
   Preparing to replace apt 0.7.20.2+lenny2 (using .../archives/apt_0.8.6_amd64.deb) ...
   Unpacking replacement apt ...
   Setting up apt (0.8.6) ...
   Installing new version of config file /etc/apt/apt.conf.d/01autoremove ...
   Installing new version of config file /etc/logrotate.d/apt ...
   Installing new version of config file /etc/cron.daily/apt ...
   gpg: key F42584E6: "Lenny Stable Release Key <debian-release at lists.debian.org>" not changed
   gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster at debian.org>" not changed
   gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
   gpg: key B98321F9: "Squeeze Stable Release Key <debian-release at lists.debian.org>" not changed
   gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster at debian.org>" not changed
   gpg: Total number processed: 5
   gpg:              unchanged: 5
   Setting up libdb4.8 (4.8.30-2) ...
   Setting up apt-utils (0.8.6) ...
   ## Running apt-get -y upgrade...
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Entering ResolveByKeep
   Keeping package dpkg:amd64
   Keeping package debianutils:amd64
   Keeping package util-linux:amd64
   Keeping package sed:amd64
   Keeping package e2fsprogs:amd64
   Keeping package bash:amd64
   Keeping package findutils:amd64
   Keeping package grep:amd64
   Keeping package diff:amd64
   Keeping package libc6:amd64
   Keeping package sysv-rc:amd64
   Keeping package gnupg:amd64
   Keeping package perl:amd64
   Package perl:amd64 perl:amd64 Depends on perl-base [ amd64 ] < 5.10.0-19lenny2 -> 5.10.1-15 > ( perl ) (= 5.10.0-19lenny2)
     Keeping Package perl-base:amd64 due to Depends
   Keeping package gpgv:amd64
   Keeping package libgdbm3:amd64
   Keeping package liblocale-gettext-perl:amd64
   Keeping package perl-modules:amd64
   Keeping package readline-common:amd64
   Keeping package common-lisp-controller:amd64
   Keeping package cl-asdf:amd64
   Keeping package sbcl:amd64
   Keeping package nvi:amd64
   The following packages have been kept back:
     bash cl-asdf common-lisp-controller debianutils diff dpkg e2fsprogs
     findutils gnupg gpgv grep libc6 libgdbm3 liblocale-gettext-perl nvi perl
     perl-base perl-modules readline-common sbcl sed sysv-rc util-linux
   The following packages will be upgraded:
     base-files base-passwd binfmt-support bsdutils coreutils debconf
     debconf-i18n debfoster debian-archive-keyring e2fslibs gcc-4.3-base gzip
     hostname ifupdown initscripts less libacl1 libattr1 libblkid1 libbz2-1.0
     libcomerr2 libdb4.6 libgc1c2 libgcc1 libncurses5 libncursesw5 libpam-modules
     libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2
     libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libusb-0.1-4
     libuuid1 login lsb-base mawk mktemp mount ncurses-base ncurses-bin net-tools
     netbase passwd realpath sysvinit sysvinit-utils tar tzdata zlib1g
   55 upgraded, 0 newly installed, 0 to remove and 23 not upgraded.
   Need to get 15.0 MB of archives.
   After this operation, 4222 kB of additional disk space will be used.
   Get:1 http://localhost/debian/ squeeze/main base-files amd64 5.9 [68.5 kB]
   Get:2 http://localhost/debian/ squeeze/main coreutils amd64 8.5-1 [5102 kB]
   Get:3 http://localhost/debian/ squeeze/main gzip amd64 1.3.12-9 [108 kB]
   Get:4 http://localhost/debian/ squeeze/main hostname amd64 3.04 [15.7 kB]
   Get:5 http://localhost/debian/ squeeze/main login amd64 1:4.1.4.2+svn3283-2 [783 kB]
   Get:6 http://localhost/debian/ squeeze/main libtext-iconv-perl amd64 1.7-2 [18.5 kB]
   Get:7 http://localhost/debian/ squeeze/main libtext-charwidth-perl amd64 0.04-6 [11.9 kB]
   Get:8 http://localhost/debian/ squeeze/main libtext-wrapi18n-perl all 0.06-7 [9004 B]
   Get:9 http://localhost/debian/ squeeze/main debconf-i18n all 1.5.36 [208 kB]
   Get:10 http://localhost/debian/ squeeze/main debconf all 1.5.36 [164 kB]
   Get:11 http://localhost/debian/ squeeze/main libpam0g amd64 1.1.1-6 [119 kB]
   Get:12 http://localhost/debian/ squeeze/main libselinux1 amd64 2.0.96-1 [88.3 kB]
   Get:13 http://localhost/debian/ squeeze/main libpam-modules amd64 1.1.1-6 [366 kB]
   Get:14 http://localhost/debian/ squeeze/main passwd amd64 1:4.1.4.2+svn3283-2 [1113 kB]
   Get:15 http://localhost/debian/ squeeze/main libuuid1 amd64 2.17.2-3.3 [58.6 kB]
   Get:16 http://localhost/debian/ squeeze/main libblkid1 amd64 2.17.2-3.3 [108 kB]
   Get:17 http://localhost/debian/ squeeze/main mount amd64 2.17.2-3.3 [177 kB]
   Get:18 http://localhost/debian/ squeeze/main libncurses5 amd64 5.7+20100313-4 [365 kB]
   Get:19 http://localhost/debian/ squeeze/main ncurses-bin amd64 5.7+20100313-4 [320 kB]
   Get:20 http://localhost/debian/ squeeze/main sysvinit-utils amd64 2.88dsf-12 [121 kB]
   Get:21 http://localhost/debian/ squeeze/main libsepol1 amd64 2.0.41-1 [132 kB]
   Get:22 http://localhost/debian/ squeeze/main sysvinit amd64 2.88dsf-12 [119 kB]
   Get:23 http://localhost/debian/ squeeze/main tar amd64 1.23-3 [931 kB]
   Get:24 http://localhost/debian/ squeeze/main mktemp all 8.5-1 [14.8 kB]
   Get:25 http://localhost/debian/ squeeze/main base-passwd amd64 3.5.22 [41.9 kB]
   Get:26 http://localhost/debian/ squeeze/main bsdutils amd64 1:2.17.2-3.3 [79.5 kB]
   Get:27 http://localhost/debian/ squeeze/main ncurses-base all 5.7+20100313-4 [187 kB]
   Get:28 http://localhost/debian/ squeeze/main mawk amd64 1.3.3-15 [90.1 kB]
   Get:29 http://localhost/debian/ squeeze/main debian-archive-keyring all 2010.08.28 [19.9 kB]
   Get:30 http://localhost/debian/ squeeze/main libbz2-1.0 amd64 1.0.5-6 [46.4 kB]
   Get:31 http://localhost/debian/ squeeze/main libslang2 amd64 2.2.2-4 [546 kB]
   Get:32 http://localhost/debian/ squeeze/main libusb-0.1-4 amd64 2:0.1.12-16 [21.9 kB]
   Get:33 http://localhost/debian/ squeeze/main e2fslibs amd64 1.41.12-2 [144 kB]
   Get:34 http://localhost/debian/ squeeze/main lsb-base all 3.2-23.1 [20.5 kB]
   Get:35 http://localhost/debian/ squeeze/main initscripts amd64 2.88dsf-12 [69.3 kB]
   Get:36 http://localhost/debian/ squeeze/main libattr1 amd64 1:2.4.44-2 [12.8 kB]
   Get:37 http://localhost/debian/ squeeze/main libacl1 amd64 2.2.49-4 [28.3 kB]
   Get:38 http://localhost/debian/ squeeze/main libcomerr2 amd64 1.41.12-2 [49.2 kB]
   Get:39 http://localhost/debian/ squeeze/main libgcc1 amd64 1:4.4.5-4 [45.0 kB]
   Get:40 http://localhost/debian/ squeeze/main libpam-runtime all 1.1.1-6 [221 kB]
   Get:41 http://localhost/debian/ squeeze/main libss2 amd64 1.41.12-2 [54.3 kB]
   Get:42 http://localhost/debian/ squeeze/main tzdata all 2010l-1 [764 kB]
   Get:43 http://localhost/debian/ squeeze/main zlib1g amd64 1:1.2.3.4.dfsg-3 [79.2 kB]
   Get:44 http://localhost/debian/ squeeze/main gcc-4.3-base amd64 4.3.5-4 [110 kB]
   Get:45 http://localhost/debian/ squeeze/main libreadline5 amd64 5.2-7 [146 kB]
   Get:46 http://localhost/debian/ squeeze/main net-tools amd64 1.60-23 [337 kB]
   Get:47 http://localhost/debian/ squeeze/main ifupdown amd64 0.6.10 [49.4 kB]
   Get:48 http://localhost/debian/ squeeze/main libncursesw5 amd64 5.7+20100313-4 [389 kB]
   Get:49 http://localhost/debian/ squeeze/main netbase all 4.42 [20.4 kB]
   Get:50 http://localhost/debian/ squeeze/main less amd64 436-1 [127 kB]
   Get:51 http://localhost/debian/ squeeze/main libdb4.6 amd64 4.6.21-16 [600 kB]
   Get:52 http://localhost/debian/ squeeze/main libgc1c2 amd64 1:6.8-1.2 [126 kB]
   Get:53 http://localhost/debian/ squeeze/main binfmt-support all 1.2.18 [23.1 kB]
   Get:54 http://localhost/debian/ squeeze/main debfoster amd64 2.7-1.1 [38.2 kB]
   Get:55 http://localhost/debian/ squeeze/main realpath amd64 1.15 [16.2 kB]
   
Extracting templates from packages: 54%
Extracting templates from packages: 100%
   Preconfiguring packages ...
   Fetched 15.0 MB in 0s (72.5 MB/s)
   (Reading database ... 7639 files and directories currently installed.)
   Preparing to replace base-files 5lenny7 (using .../base-files_5.9_amd64.deb) ...
   Unpacking replacement base-files ...
   Replacing files in old package dpkg ...
   Setting up base-files (5.9) ...
   Installing new version of config file /etc/debian_version ...
   Installing new version of config file /etc/issue ...
   Installing new version of config file /etc/issue.net ...
   (Reading database ... 7641 files and directories currently installed.)
   Preparing to replace coreutils 6.10-6 (using .../coreutils_8.5-1_amd64.deb) ...
   Unpacking replacement coreutils ...
   Replacing files in old package mktemp ...
   Setting up coreutils (8.5-1) ...
   (Reading database ... 7667 files and directories currently installed.)
   Preparing to replace gzip 1.3.12-6+lenny1 (using .../gzip_1.3.12-9_amd64.deb) ...
   Unpacking replacement gzip ...
   Setting up gzip (1.3.12-9) ...
   (Reading database ... 7667 files and directories currently installed.)
   Preparing to replace hostname 2.95 (using .../hostname_3.04_amd64.deb) ...
   Unpacking replacement hostname ...
   Setting up hostname (3.04) ...
   (Reading database ... 7673 files and directories currently installed.)
   Preparing to replace login 1:4.1.1-6+lenny1 (using .../login_1%3a4.1.4.2+svn3283-2_amd64.deb) ...
   Unpacking replacement login ...
   Setting up login (1:4.1.4.2+svn3283-2) ...
   Installing new version of config file /etc/securetty ...
   Installing new version of config file /etc/pam.d/login ...
   Installing new version of config file /etc/login.defs ...
   (Reading database ... 7672 files and directories currently installed.)
   Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ...
   Unpacking replacement libtext-iconv-perl ...
   Setting up libtext-iconv-perl (1.7-2) ...
   (Reading database ... 7673 files and directories currently installed.)
   Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ...
   Unpacking replacement libtext-charwidth-perl ...
   Setting up libtext-charwidth-perl (0.04-6) ...
   (Reading database ... 7673 files and directories currently installed.)
   Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ...
   Unpacking replacement libtext-wrapi18n-perl ...
   Setting up libtext-wrapi18n-perl (0.06-7) ...
   (Reading database ... 7673 files and directories currently installed.)
   Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.36_all.deb) ...
   Unpacking replacement debconf-i18n ...
   Setting up debconf-i18n (1.5.36) ...
   (Reading database ... 7687 files and directories currently installed.)
   Preparing to replace debconf 1.5.24 (using .../debconf_1.5.36_all.deb) ...
   Unpacking replacement debconf ...
   Setting up debconf (1.5.36) ...
   (Reading database ... 7691 files and directories currently installed.)
   Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.1-6_amd64.deb) ...
   Unpacking replacement libpam0g ...
   Setting up libpam0g (1.1.1-6) ...
   Checking for services that may need to be restarted...Checking init scripts...
   Nothing to restart.
   (Reading database ... 7691 files and directories currently installed.)
   Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.96-1_amd64.deb) ...
   Unpacking replacement libselinux1 ...
   Setting up libselinux1 (2.0.96-1) ...
   (Reading database ... 7691 files and directories currently installed.)
   Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.1-6_amd64.deb) ...
   Unpacking replacement libpam-modules ...
   Setting up libpam-modules (1.1.1-6) ...
   Installing new version of config file /etc/security/namespace.init ...
   Installing new version of config file /etc/security/limits.conf ...
   (Reading database ... 7697 files and directories currently installed.)
   Preparing to replace passwd 1:4.1.1-6+lenny1 (using .../passwd_1%3a4.1.4.2+svn3283-2_amd64.deb) ...
   Unpacking replacement passwd ...
   Setting up passwd (1:4.1.4.2+svn3283-2) ...
   (Reading database ... 7692 files and directories currently installed.)
   Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.17.2-3.3_amd64.deb) ...
   Unpacking replacement libuuid1 ...
   Setting up libuuid1 (2.17.2-3.3) ...
   (Reading database ... 7692 files and directories currently installed.)
   Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.17.2-3.3_amd64.deb) ...
   Unpacking replacement libblkid1 ...
   Setting up libblkid1 (2.17.2-3.3) ...
   (Reading database ... 7693 files and directories currently installed.)
   Preparing to replace mount 2.13.1.1-1 (using .../mount_2.17.2-3.3_amd64.deb) ...
   Unpacking replacement mount ...
   Setting up mount (2.17.2-3.3) ...
   (Reading database ... 7694 files and directories currently installed.)
   Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20100313-4_amd64.deb) ...
   Unpacking replacement libncurses5 ...
   Setting up libncurses5 (5.7+20100313-4) ...
   (Reading database ... 7694 files and directories currently installed.)
   Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20100313-4_amd64.deb) ...
   Unpacking replacement ncurses-bin ...
   Setting up ncurses-bin (5.7+20100313-4) ...
   (Reading database ... 7696 files and directories currently installed.)
   Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.88dsf-12_amd64.deb) ...
   Unpacking replacement sysvinit-utils ...
   Replacing files in old package sysvinit ...
   Setting up sysvinit-utils (2.88dsf-12) ...
   (Reading database ... 7700 files and directories currently installed.)
   Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.41-1_amd64.deb) ...
   Unpacking replacement libsepol1 ...
   Setting up libsepol1 (2.0.41-1) ...
   (Reading database ... 7700 files and directories currently installed.)
   Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.88dsf-12_amd64.deb) ...
   Unpacking replacement sysvinit ...
   Setting up sysvinit (2.88dsf-12) ...
   (Reading database ... 7701 files and directories currently installed.)
   Preparing to replace tar 1.20-1+lenny1 (using .../archives/tar_1.23-3_amd64.deb) ...
   Unpacking replacement tar ...
   Setting up tar (1.23-3) ...
   (Reading database ... 7701 files and directories currently installed.)
   Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_8.5-1_all.deb) ...
   Unpacking replacement mktemp ...
   Setting up mktemp (8.5-1) ...
   (Reading database ... 7701 files and directories currently installed.)
   Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ...
   Unpacking replacement base-passwd ...
   Setting up base-passwd (3.5.22) ...
   (Reading database ... 7701 files and directories currently installed.)
   Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.17.2-3.3_amd64.deb) ...
   Unpacking replacement bsdutils ...
   Setting up bsdutils (1:2.17.2-3.3) ...
   (Reading database ... 7702 files and directories currently installed.)
   Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20100313-4_all.deb) ...
   Unpacking replacement ncurses-base ...
   Setting up ncurses-base (5.7+20100313-4) ...
   (Reading database ... 7652 files and directories currently installed.)
   Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ...
   Unpacking replacement mawk ...
   Preparing to replace debian-archive-keyring 2010.08.28~lenny1 (using .../debian-archive-keyring_2010.08.28_all.deb) ...
   Unpacking replacement debian-archive-keyring ...
   Setting up debian-archive-keyring (2010.08.28) ...
   gpg: key F42584E6: "Lenny Stable Release Key <debian-release at lists.debian.org>" not changed
   gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster at debian.org>" not changed
   gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
   gpg: key B98321F9: "Squeeze Stable Release Key <debian-release at lists.debian.org>" not changed
   gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster at debian.org>" not changed
   gpg: Total number processed: 5
   gpg:              unchanged: 5
   (Reading database ... 7652 files and directories currently installed.)
   Preparing to replace libbz2-1.0 1.0.5-1 (using .../libbz2-1.0_1.0.5-6_amd64.deb) ...
   Unpacking replacement libbz2-1.0 ...
   Setting up libbz2-1.0 (1.0.5-6) ...
   (Reading database ... 7652 files and directories currently installed.)
   Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.2-4_amd64.deb) ...
   Unpacking replacement libslang2 ...
   Setting up libslang2 (2.2.2-4) ...
   (Reading database ... 7652 files and directories currently installed.)
   Preparing to replace libusb-0.1-4 2:0.1.12-13 (using .../libusb-0.1-4_2%3a0.1.12-16_amd64.deb) ...
   Unpacking replacement libusb-0.1-4 ...
   Setting up libusb-0.1-4 (2:0.1.12-16) ...
   (Reading database ... 7652 files and directories currently installed.)
   Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.12-2_amd64.deb) ...
   Unpacking replacement e2fslibs ...
   Setting up e2fslibs (1.41.12-2) ...
   (Reading database ... 7652 files and directories currently installed.)
   Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23.1_all.deb) ...
   Unpacking replacement lsb-base ...
   Setting up lsb-base (3.2-23.1) ...
   (Reading database ... 7652 files and directories currently installed.)
   Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.88dsf-12_amd64.deb) ...
   Unpacking replacement initscripts ...
   Setting up initscripts (2.88dsf-12) ...
   Installing new version of config file /etc/init.d/bootlogd ...
   Installing new version of config file /etc/init.d/stop-bootlogd ...
   Installing new version of config file /etc/init.d/stop-bootlogd-single ...
   Installing new version of config file /etc/init.d/bootmisc.sh ...
   Installing new version of config file /etc/init.d/checkfs.sh ...
   Installing new version of config file /etc/init.d/checkroot.sh ...
   Installing new version of config file /etc/init.d/hostname.sh ...
   Installing new version of config file /etc/init.d/killprocs ...
   Installing new version of config file /etc/init.d/mountall.sh ...
   Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ...
   Installing new version of config file /etc/init.d/mountoverflowtmp ...
   Installing new version of config file /etc/init.d/mountdevsubfs.sh ...
   Installing new version of config file /etc/init.d/mountkernfs.sh ...
   Installing new version of config file /etc/init.d/mtab.sh ...
   Installing new version of config file /etc/init.d/rc.local ...
   Installing new version of config file /etc/init.d/rmnologin ...
   Installing new version of config file /etc/init.d/sendsigs ...
   Installing new version of config file /etc/init.d/umountfs ...
   Installing new version of config file /etc/init.d/umountnfs.sh ...
   Installing new version of config file /etc/init.d/urandom ...
   Installing new version of config file /etc/network/if-up.d/mountnfs ...
   (Reading database ... 7655 files and directories currently installed.)
   Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-2_amd64.deb) ...
   Unpacking replacement libattr1 ...
   Setting up libattr1 (1:2.4.44-2) ...
   (Reading database ... 7655 files and directories currently installed.)
   Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.49-4_amd64.deb) ...
   Unpacking replacement libacl1 ...
   Setting up libacl1 (2.2.49-4) ...
   (Reading database ... 7656 files and directories currently installed.)
   Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.12-2_amd64.deb) ...
   Unpacking replacement libcomerr2 ...
   Setting up libcomerr2 (1.41.12-2) ...
   (Reading database ... 7656 files and directories currently installed.)
   Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.5-4_amd64.deb) ...
   Unpacking replacement libgcc1 ...
   Setting up libgcc1 (1:4.4.5-4) ...
   (Reading database ... 7656 files and directories currently installed.)
   Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.1-6_all.deb) ...
   Unpacking replacement libpam-runtime ...
   Setting up libpam-runtime (1.1.1-6) ...
   (Reading database ... 7673 files and directories currently installed.)
   Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.12-2_amd64.deb) ...
   Unpacking replacement libss2 ...
   Setting up libss2 (1.41.12-2) ...
   (Reading database ... 7673 files and directories currently installed.)
   Preparing to replace tzdata 2010j-0lenny1 (using .../tzdata_2010l-1_all.deb) ...
   Unpacking replacement tzdata ...
   Setting up tzdata (2010l-1) ...
   
   Current default time zone: 'Etc/UTC'
   Local time is now:      Sun Oct 31 11:22:54 UTC 2010.
   Universal Time is now:  Sun Oct 31 11:22:54 UTC 2010.
   Run 'dpkg-reconfigure tzdata' if you wish to change it.
   
   (Reading database ... 7682 files and directories currently installed.)
   Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.4.dfsg-3_amd64.deb) ...
   Unpacking replacement zlib1g ...
   Setting up zlib1g (1:1.2.3.4.dfsg-3) ...
   (Reading database ... 7682 files and directories currently installed.)
   Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.5-4_amd64.deb) ...
   Unpacking replacement gcc-4.3-base ...
   Setting up gcc-4.3-base (4.3.5-4) ...
   (Reading database ... 7681 files and directories currently installed.)
   Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ...
   Unpacking replacement libreadline5 ...
   Setting up libreadline5 (5.2-7) ...
   (Reading database ... 7681 files and directories currently installed.)
   Preparing to replace net-tools 1.60-22 (using .../net-tools_1.60-23_amd64.deb) ...
   Unpacking replacement net-tools ...
   Preparing to replace ifupdown 0.6.8+nmu1 (using .../ifupdown_0.6.10_amd64.deb) ...
   Unpacking replacement ifupdown ...
   Preparing to replace libncursesw5 5.7+20081213-1 (using .../libncursesw5_5.7+20100313-4_amd64.deb) ...
   Unpacking replacement libncursesw5 ...
   Preparing to replace netbase 4.34 (using .../archives/netbase_4.42_all.deb) ...
   Unpacking replacement netbase ...
   Preparing to replace less 418-1 (using .../archives/less_436-1_amd64.deb) ...
   Unpacking replacement less ...
   Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-16_amd64.deb) ...
   Unpacking replacement libdb4.6 ...
   Preparing to replace libgc1c2 1:6.8-1.1 (using .../libgc1c2_1%3a6.8-1.2_amd64.deb) ...
   Unpacking replacement libgc1c2 ...
   Preparing to replace binfmt-support 1.2.11 (using .../binfmt-support_1.2.18_all.deb) ...
   Unpacking replacement binfmt-support ...
   Preparing to replace debfoster 2.7-1 (using .../debfoster_2.7-1.1_amd64.deb) ...
   Unpacking replacement debfoster ...
   Preparing to replace realpath 1.12 (using .../realpath_1.15_amd64.deb) ...
   Unpacking replacement realpath ...
   Setting up mawk (1.3.3-15) ...
   Setting up net-tools (1.60-23) ...
   Setting up ifupdown (0.6.10) ...
   Installing new version of config file /etc/init.d/ifupdown-clean ...
   ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces
   ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces
   Setting up libncursesw5 (5.7+20100313-4) ...
   Setting up netbase (4.42) ...
   Installing new version of config file /etc/services ...
   Installing new version of config file /etc/protocols ...
   Installing new version of config file /etc/init.d/networking ...
   Setting up less (436-1) ...
   Setting up libdb4.6 (4.6.21-16) ...
   Setting up libgc1c2 (1:6.8-1.2) ...
   Setting up binfmt-support (1.2.18) ...
   Installing new version of config file /etc/init.d/binfmt-support ...
   update-binfmts: warning: Couldn't load the binfmt_misc module. 
   Setting up debfoster (2.7-1.1) ...
   Setting up realpath (1.15) ...
   ## Running apt-get -y dist-upgrade...
   Reading package lists...
   Building dependency tree...
   Reading state information...
   Starting
   Starting 2
   Done
   The following NEW packages will be installed:
     adduser ca-certificates dash diffutils gnupg-curl insserv libc-bin
     libcurl3-gnutls libdb4.7 libgcrypt11 libgnutls26 libgpg-error0
     libgssapi-krb5-2 libidn11 libk5crypto3 libkeyutils1 libkrb5-3
     libkrb5support0 libldap-2.4-2 liblzma2 libreadline6 libsasl2-2
     libsasl2-modules libssl0.9.8 libtasn1-3 openssl sensible-utils xz-utils
   The following packages will be upgraded:
     bash cl-asdf common-lisp-controller debianutils diff dpkg e2fsprogs
     findutils gnupg gpgv grep libc6 libgdbm3 liblocale-gettext-perl nvi perl
     perl-base perl-modules readline-common sbcl sed sysv-rc util-linux
   23 upgraded, 28 newly installed, 0 to remove and 0 not upgraded.
   Need to get 41.0 MB of archives.
   After this operation, 28.8 MB of additional disk space will be used.
   Get:1 http://localhost/debian/ squeeze/main libc-bin amd64 2.11.2-6 [746 kB]
   Get:2 http://localhost/debian/ squeeze/main libc6 amd64 2.11.2-6 [4272 kB]
   Get:3 http://localhost/debian/ squeeze/main liblzma2 amd64 4.999.9beta+20100810-1 [172 kB]
   Get:4 http://localhost/debian/ squeeze/main xz-utils amd64 4.999.9beta+20100810-1 [175 kB]
   Get:5 http://localhost/debian/ squeeze/main dpkg amd64 1.15.8.5 [2255 kB]
   Get:6 http://localhost/debian/ squeeze/main sensible-utils all 0.0.4 [5408 B]
   Get:7 http://localhost/debian/ squeeze/main debianutils amd64 3.4 [49.9 kB]
   Get:8 http://localhost/debian/ squeeze/main dash amd64 0.5.5.1-6 [104 kB]
   Get:9 http://localhost/debian/ squeeze/main bash amd64 4.1-3 [1325 kB]
   Get:10 http://localhost/debian/ squeeze/main diffutils amd64 1:3.0-1 [361 kB]
   Get:11 http://localhost/debian/ squeeze/main util-linux amd64 2.17.2-3.3 [729 kB]
   Get:12 http://localhost/debian/ squeeze/main e2fsprogs amd64 1.41.12-2 [817 kB]
   Get:13 http://localhost/debian/ squeeze/main findutils amd64 4.4.2-1+b1 [689 kB]
   Get:14 http://localhost/debian/ squeeze/main grep amd64 2.6.3-3 [308 kB]
   Get:15 http://localhost/debian/ squeeze/main perl-modules all 5.10.1-15 [3481 kB]
   Get:16 http://localhost/debian/ squeeze/main libdb4.7 amd64 4.7.25-9 [662 kB]
   Get:17 http://localhost/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB]
   Get:18 http://localhost/debian/ squeeze/main perl amd64 5.10.1-15 [4461 kB]
   Get:19 http://localhost/debian/ squeeze/main perl-base amd64 5.10.1-15 [1066 kB]
   Get:20 http://localhost/debian/ squeeze/main sed amd64 4.2.1-7 [251 kB]
   Get:21 http://localhost/debian/ squeeze/main diff all 1:3.0-1 [6490 B]
   Get:22 http://localhost/debian/ squeeze/main liblocale-gettext-perl amd64 1.05-6 [21.6 kB]
   Get:23 http://localhost/debian/ squeeze/main readline-common all 6.1-3 [54.0 kB]
   Get:24 http://localhost/debian/ squeeze/main libreadline6 amd64 6.1-3 [161 kB]
   Get:25 http://localhost/debian/ squeeze/main gpgv amd64 1.4.10-4 [221 kB]
   Get:26 http://localhost/debian/ squeeze/main gnupg amd64 1.4.10-4 [2148 kB]
   Get:27 http://localhost/debian/ squeeze/main insserv amd64 1.14.0-2 [71.0 kB]
   Get:28 http://localhost/debian/ squeeze/main sysv-rc all 2.88dsf-12 [73.0 kB]
   Get:29 http://localhost/debian/ squeeze/main adduser all 3.112 [157 kB]
   Get:30 http://localhost/debian/ squeeze/main libssl0.9.8 amd64 0.9.8o-2 [945 kB]
   Get:31 http://localhost/debian/ squeeze/main libgpg-error0 amd64 1.6-1 [43.9 kB]
   Get:32 http://localhost/debian/ squeeze/main libgcrypt11 amd64 1.4.5-2 [282 kB]
   Get:33 http://localhost/debian/ squeeze/main libtasn1-3 amd64 2.7-1 [63.1 kB]
   Get:34 http://localhost/debian/ squeeze/main libgnutls26 amd64 2.8.6-1 [559 kB]
   Get:35 http://localhost/debian/ squeeze/main libkeyutils1 amd64 1.4-1 [6942 B]
   Get:36 http://localhost/debian/ squeeze/main libkrb5support0 amd64 1.8.3+dfsg-2 [45.2 kB]
   Get:37 http://localhost/debian/ squeeze/main libk5crypto3 amd64 1.8.3+dfsg-2 [105 kB]
   Get:38 http://localhost/debian/ squeeze/main libkrb5-3 amd64 1.8.3+dfsg-2 [374 kB]
   Get:39 http://localhost/debian/ squeeze/main libgssapi-krb5-2 amd64 1.8.3+dfsg-2 [130 kB]
   Get:40 http://localhost/debian/ squeeze/main libidn11 amd64 1.15-2 [158 kB]
   Get:41 http://localhost/debian/ squeeze/main libsasl2-2 amd64 2.1.23.dfsg1-6 [115 kB]
   Get:42 http://localhost/debian/ squeeze/main libldap-2.4-2 amd64 2.4.23-6 [210 kB]
   Get:43 http://localhost/debian/ squeeze/main openssl amd64 0.9.8o-2 [1059 kB]
   Get:44 http://localhost/debian/ squeeze/main ca-certificates all 20090814+nmu2 [153 kB]
   Get:45 http://localhost/debian/ squeeze/main cl-asdf all 2:2.004-1 [503 kB]
   Get:46 http://localhost/debian/ squeeze/main sbcl amd64 1:1.0.40.0-2 [10.6 MB]
   Get:47 http://localhost/debian/ squeeze/main common-lisp-controller all 7.4 [34.5 kB]
   Get:48 http://localhost/debian/ squeeze/main libcurl3-gnutls amd64 7.21.0-1 [266 kB]
   Get:49 http://localhost/debian/ squeeze/main gnupg-curl amd64 1.4.10-4 [74.6 kB]
   Get:50 http://localhost/debian/ squeeze/main libsasl2-modules amd64 2.1.23.dfsg1-6 [155 kB]
   Get:51 http://localhost/debian/ squeeze/main nvi amd64 1.81.6-8.1 [278 kB]
   
Extracting templates from packages: 58%
Extracting templates from packages: 100%
   Preconfiguring packages ...
   Fetched 41.0 MB in 0s (76.9 MB/s)
   Selecting previously deselected package libc-bin.
   dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ...
   dpkg: yes, will deconfigure libc6 (broken by libc-bin).
   (Reading database ... 7714 files and directories currently installed.)
   Unpacking libc-bin (from .../libc-bin_2.11.2-6_amd64.deb) ...
   De-configuring libc6 ...
   Replacing files in old package libc6 ...
   Setting up libc-bin (2.11.2-6) ...
   Installing new version of config file /etc/gai.conf ...
   Installing new version of config file /etc/bindresvport.blacklist ...
   (Reading database ... 7720 files and directories currently installed.)
   Preparing to replace libc6 2.7-18lenny4 (using .../libc6_2.11.2-6_amd64.deb) ...
   Removing obsolete conffile /etc/init.d/glibc.sh ...
   Checking for services that may need to be restarted...
   Checking init scripts...
   Unpacking replacement libc6 ...
   Setting up libc6 (2.11.2-6) ...
   Checking for services that may need to be restarted...
   Checking init scripts...
   Nothing to restart.
   Selecting previously deselected package liblzma2.
   (Reading database ... 7715 files and directories currently installed.)
   Unpacking liblzma2 (from .../liblzma2_4.999.9beta+20100810-1_amd64.deb) ...
   Setting up liblzma2 (4.999.9beta+20100810-1) ...
   Selecting previously deselected package xz-utils.
   (Reading database ... 7724 files and directories currently installed.)
   Unpacking xz-utils (from .../xz-utils_4.999.9beta+20100810-1_amd64.deb) ...
   Setting up xz-utils (4.999.9beta+20100810-1) ...
   (Reading database ... 7763 files and directories currently installed.)
   Preparing to replace dpkg 1.14.29 (using .../dpkg_1.15.8.5_amd64.deb) ...
   Unpacking replacement dpkg ...
   Setting up dpkg (1.15.8.5) ...
   Installing new version of config file /etc/logrotate.d/dpkg ...
   Selecting previously deselected package sensible-utils.
   (Reading database ... 7766 files and directories currently installed.)
   Unpacking sensible-utils (from .../sensible-utils_0.0.4_all.deb) ...
   Replacing files in old package debianutils ...
   Setting up sensible-utils (0.0.4) ...
   (Reading database ... 7773 files and directories currently installed.)
   Preparing to replace debianutils 2.30 (using .../debianutils_3.4_amd64.deb) ...
   Unpacking replacement debianutils ...
   Setting up debianutils (3.4) ...
   Selecting previously deselected package dash.
   (Reading database ... 7769 files and directories currently installed.)
   Unpacking dash (from .../dash_0.5.5.1-6_amd64.deb) ...
   Adding 'diversion of /bin/sh to /bin/sh.distrib by dash'
   Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash'
   Setting up dash (0.5.5.1-6) ...
   (Reading database ... 7780 files and directories currently installed.)
   Preparing to replace bash 3.2-4 (using .../archives/bash_4.1-3_amd64.deb) ...
   Unpacking replacement bash ...
   Setting up bash (4.1-3) ...
   Installing new version of config file /etc/bash.bashrc ...
   Installing new version of config file /etc/skel/.bashrc ...
   update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode.
   Selecting previously deselected package diffutils.
   (Reading database ... 7803 files and directories currently installed.)
   Unpacking diffutils (from .../diffutils_1%3a3.0-1_amd64.deb) ...
   Replacing files in old package diff ...
   Setting up diffutils (1:3.0-1) ...
   (Reading database ... 7825 files and directories currently installed.)
   Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.17.2-3.3_amd64.deb) ...
   install-info: warning: maintainer scripts should not call install-info anymore,
   install-info: warning: this is handled now by a dpkg trigger provided by the
   install-info: warning: install-info package; package util-linux should be updated.
   Unpacking replacement util-linux ...
   Replacing files in old package e2fsprogs ...
   Setting up util-linux (2.17.2-3.3) ...
   Installing new version of config file /etc/init.d/hwclockfirst.sh ...
   Installing new version of config file /etc/init.d/hwclock.sh ...
   update-alternatives: using /bin/less to provide /usr/bin/pager (pager) in auto mode.
   (Reading database ... 7840 files and directories currently installed.)
   Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.12-2_amd64.deb) ...
   Unpacking replacement e2fsprogs ...
   Setting up e2fsprogs (1.41.12-2) ...
   Installing new version of config file /etc/mke2fs.conf ...
   (Reading database ... 7843 files and directories currently installed.)
   Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1+b1_amd64.deb) ...
   install-info: warning: maintainer scripts should not call install-info anymore,
   install-info: warning: this is handled now by a dpkg trigger provided by the
   install-info: warning: install-info package; package findutils should be updated.
   Unpacking replacement findutils ...
   Setting up findutils (4.4.2-1+b1) ...
   (Reading database ... 7845 files and directories currently installed.)
   Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.6.3-3_amd64.deb) ...
   Unpacking replacement grep ...
   Setting up grep (2.6.3-3) ...
   (Reading database ... 7847 files and directories currently installed.)
   Preparing to replace perl-modules 5.10.0-19lenny2 (using .../perl-modules_5.10.1-15_all.deb) ...
   Unpacking replacement perl-modules ...
   Selecting previously deselected package libdb4.7.
   Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ...
   Preparing to replace libgdbm3 1.8.3-3 (using .../libgdbm3_1.8.3-9_amd64.deb) ...
   Unpacking replacement libgdbm3 ...
   Preparing to replace perl 5.10.0-19lenny2 (using .../perl_5.10.1-15_amd64.deb) ...
   Unpacking replacement perl ...
   Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-15_amd64.deb) ...
   Unpacking replacement perl-base ...
   Setting up perl-base (5.10.1-15) ...
   (Reading database ... 8022 files and directories currently installed.)
   Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-7_amd64.deb) ...
   Unpacking replacement sed ...
   Setting up sed (4.2.1-7) ...
   (Reading database ... 8025 files and directories currently installed.)
   Preparing to replace diff 2.8.1-12 (using .../diff_1%3a3.0-1_all.deb) ...
   Unpacking replacement diff ...
   Setting up diff (1:3.0-1) ...
   (Reading database ... 8020 files and directories currently installed.)
   Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ...
   Unpacking replacement liblocale-gettext-perl ...
   Setting up liblocale-gettext-perl (1.05-6) ...
   (Reading database ... 8020 files and directories currently installed.)
   Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.1-3_all.deb) ...
   install-info: warning: maintainer scripts should not call install-info anymore,
   install-info: warning: this is handled now by a dpkg trigger provided by the
   install-info: warning: install-info package; package readline-common should be updated.
   Unpacking replacement readline-common ...
   Setting up readline-common (6.1-3) ...
   Selecting previously deselected package libreadline6.
   (Reading database ... 8020 files and directories currently installed.)
   Unpacking libreadline6 (from .../libreadline6_6.1-3_amd64.deb) ...
   Setting up libreadline6 (6.1-3) ...
   (Reading database ... 8033 files and directories currently installed.)
   Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-4_amd64.deb) ...
   Unpacking replacement gpgv ...
   Setting up gpgv (1.4.10-4) ...
   (Reading database ... 8034 files and directories currently installed.)
   Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-4_amd64.deb) ...
   Unpacking replacement gnupg ...
   Setting up gnupg (1.4.10-4) ...
   Selecting previously deselected package insserv.
   dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ...
   dpkg: yes, will deconfigure sysv-rc (broken by insserv).
   (Reading database ... 8042 files and directories currently installed.)
   Unpacking insserv (from .../insserv_1.14.0-2_amd64.deb) ...
   De-configuring sysv-rc ...
   Setting up insserv (1.14.0-2) ...
   (Reading database ... 8071 files and directories currently installed.)
   Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.88dsf-12_all.deb) ...
   Unpacking replacement sysv-rc ...
   Setting up sysv-rc (2.88dsf-12) ...
   info: Checking if it is safe to convert to dependency based boot.
   info: Reordering boot system, log to /var/lib/insserv/run-20101031T1123.log
   success: Enabled dependency based boot system.
   Selecting previously deselected package adduser.
   (Reading database ... 8072 files and directories currently installed.)
   Unpacking adduser (from .../archives/adduser_3.112_all.deb) ...
   Selecting previously deselected package libssl0.9.8.
   Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8o-2_amd64.deb) ...
   Selecting previously deselected package libgpg-error0.
   Unpacking libgpg-error0 (from .../libgpg-error0_1.6-1_amd64.deb) ...
   Selecting previously deselected package libgcrypt11.
   Unpacking libgcrypt11 (from .../libgcrypt11_1.4.5-2_amd64.deb) ...
   Selecting previously deselected package libtasn1-3.
   Unpacking libtasn1-3 (from .../libtasn1-3_2.7-1_amd64.deb) ...
   Selecting previously deselected package libgnutls26.
   Unpacking libgnutls26 (from .../libgnutls26_2.8.6-1_amd64.deb) ...
   Selecting previously deselected package libkeyutils1.
   Unpacking libkeyutils1 (from .../libkeyutils1_1.4-1_amd64.deb) ...
   Selecting previously deselected package libkrb5support0.
   Unpacking libkrb5support0 (from .../libkrb5support0_1.8.3+dfsg-2_amd64.deb) ...
   Selecting previously deselected package libk5crypto3.
   Unpacking libk5crypto3 (from .../libk5crypto3_1.8.3+dfsg-2_amd64.deb) ...
   Selecting previously deselected package libkrb5-3.
   Unpacking libkrb5-3 (from .../libkrb5-3_1.8.3+dfsg-2_amd64.deb) ...
   Selecting previously deselected package libgssapi-krb5-2.
   Unpacking libgssapi-krb5-2 (from .../libgssapi-krb5-2_1.8.3+dfsg-2_amd64.deb) ...
   Selecting previously deselected package libidn11.
   Unpacking libidn11 (from .../libidn11_1.15-2_amd64.deb) ...
   Selecting previously deselected package libsasl2-2.
   Unpacking libsasl2-2 (from .../libsasl2-2_2.1.23.dfsg1-6_amd64.deb) ...
   Selecting previously deselected package libldap-2.4-2.
   Unpacking libldap-2.4-2 (from .../libldap-2.4-2_2.4.23-6_amd64.deb) ...
   Selecting previously deselected package openssl.
   Unpacking openssl (from .../openssl_0.9.8o-2_amd64.deb) ...
   Selecting previously deselected package ca-certificates.
   Unpacking ca-certificates (from .../ca-certificates_20090814+nmu2_all.deb) ...
   dpkg: common-lisp-controller: dependency problems, but removing anyway as you requested:
    sbcl depends on common-lisp-controller (>= 5.11).
   (Reading database ... 8812 files and directories currently installed.)
   Removing common-lisp-controller ...
   (Reading database ... 8788 files and directories currently installed.)
   Preparing to replace cl-asdf 1.111-1 (using .../cl-asdf_2%3a2.004-1_all.deb) ...
   Unpacking replacement cl-asdf ...
   Preparing to replace sbcl 1:1.0.18.0-2 (using .../sbcl_1%3a1.0.40.0-2_amd64.deb) ...
   Unpacking replacement sbcl ...
   Selecting previously deselected package common-lisp-controller.
   Unpacking common-lisp-controller (from .../common-lisp-controller_7.4_all.deb) ...
   adduser: `/etc/adduser.conf' does not exist. Using defaults.
   Adding system user `cl-builder' (UID 105) ...
   Adding new group `cl-builder' (GID 108) ...
   Adding new user `cl-builder' (UID 105) with group `cl-builder' ...
   Not creating home directory `/usr/share/common-lisp/'.
   Selecting previously deselected package libcurl3-gnutls.
   Unpacking libcurl3-gnutls (from .../libcurl3-gnutls_7.21.0-1_amd64.deb) ...
   Selecting previously deselected package gnupg-curl.
   Unpacking gnupg-curl (from .../gnupg-curl_1.4.10-4_amd64.deb) ...
   Adding 'diversion of /usr/lib/gnupg/gpgkeys_curl to /usr/lib/gnupg/gpgkeys_curl.non_curl by gnupg-curl'
   Adding 'diversion of /usr/lib/gnupg/gpgkeys_hkp to /usr/lib/gnupg/gpgkeys_hkp.non_curl by gnupg-curl'
   Selecting previously deselected package libsasl2-modules.
   Unpacking libsasl2-modules (from .../libsasl2-modules_2.1.23.dfsg1-6_amd64.deb) ...
   Preparing to replace nvi 1.81.6-4 (using .../nvi_1.81.6-8.1_amd64.deb) ...
   invoke-rc.d: policy-rc.d denied execution of stop.
   Unpacking replacement nvi ...
   Setting up libdb4.7 (4.7.25-9) ...
   Setting up libgdbm3 (1.8.3-9) ...
   Setting up adduser (3.112) ...
   Setting up libssl0.9.8 (0.9.8o-2) ...
   Setting up libgpg-error0 (1.6-1) ...
   Setting up libgcrypt11 (1.4.5-2) ...
   Setting up libtasn1-3 (2.7-1) ...
   Setting up libgnutls26 (2.8.6-1) ...
   Setting up libkeyutils1 (1.4-1) ...
   Setting up libkrb5support0 (1.8.3+dfsg-2) ...
   Setting up libk5crypto3 (1.8.3+dfsg-2) ...
   Setting up libkrb5-3 (1.8.3+dfsg-2) ...
   Setting up libgssapi-krb5-2 (1.8.3+dfsg-2) ...
   Setting up libidn11 (1.15-2) ...
   Setting up libsasl2-2 (2.1.23.dfsg1-6) ...
   Setting up libldap-2.4-2 (2.4.23-6) ...
   Setting up openssl (0.9.8o-2) ...
   Setting up ca-certificates (20090814+nmu2) ...
   Updating certificates in /etc/ssl/certs... WARNING: Skipping duplicate certificate brasil.gov.br.pem
   141 added, 0 removed; done.
   Running hooks in /etc/ca-certificates/update.d....done.
   Setting up libcurl3-gnutls (7.21.0-1) ...
   Setting up gnupg-curl (1.4.10-4) ...
   Setting up libsasl2-modules (2.1.23.dfsg1-6) ...
   Setting up nvi (1.81.6-8.1) ...
   invoke-rc.d: policy-rc.d denied execution of start.
   Setting up perl-modules (5.10.1-15) ...
   Setting up perl (5.10.1-15) ...
   Setting up common-lisp-controller (7.4) ...
   
   Configuration file `/etc/lisp-config.lisp'
    ==> File on system created by you or by a script.
    ==> File also in package provided by package maintainer.
      What would you like to do about it ?  Your options are:
       Y or I  : install the package maintainer's version
       N or O  : keep your currently-installed version
         D     : show the differences between the versions
         Z     : start a shell to examine the situation
    The default action is to keep your current version.
   *** lisp-config.lisp (Y/I/N/O/D/Z) [default=N] ? dpkg: error processing common-lisp-controller (--configure):
    EOF on stdin at conffile prompt
   dpkg: dependency problems prevent configuration of cl-asdf:
    cl-asdf depends on common-lisp-controller (>= 5.11); however:
     Package common-lisp-controller is not configured yet.
   dpkg: error processing cl-asdf (--configure):
    dependency problems - leaving unconfigured
   configured to not write apport reports
   configured to not write apport reports
   dpkg: dependency problems prevent configuration of sbcl:
    sbcl depends on common-lisp-controller (>= 5.11); however:
     Package common-lisp-controller is not configured yet.
   dpkg: error processing sbcl (--configure):
    dependency problems - leaving unconfigured
   configured to not write apport reports
   Errors were encountered while processing:
    common-lisp-controller
    cl-asdf
    sbcl
   E: Sub-process /usr/bin/dpkg returned an error code (1)
-- Result: FAILED
-- Total time: 78.61192s
-- Tests OK: inst-deps inst-after-deps inst-with-deps inst-aptitude inst-with-recs rm-pkg rm-deps purge-pkg inst-old
-- Tests Failed: upgrade-old





Reply to: