[thhsieh: [Update] xcin-2.5.1-2]
----- Forwarded message from Tung-Han Hsieh <thhsieh> -----
Date: Wed, 22 Sep 1999 11:31:11 +0800
From: Tung-Han Hsieh <thhsieh>
To: xcin@linux.org.tw
Subject: [Update] xcin-2.5.1-2
X-Mailer: Mutt 0.95.4us
Hi, 各位:
請試試這一個新的 update:
ftp://xcin.linux.org.tw/pub/xcin/xcin/xcin-2.5.1-2.tar.gz
ftp://twcpro.phys.ntu.edu.tw/xcin/xcin/xcin-2.5.1-2.tar.gz
同時搭配目前的 libtabe-0.1-pre4:
ftp://xcin.linux.org.tw/pub/xcin/libtabe/devel/libtabe-0.1-pre4.tar.gz
ftp://twcpro.phys.ntu.edu.tw/xcin/libtabe/devel/libtabe-0.1-pre4.tar.gz
目前 libtabe 還有問題有待解決,尤其是 bims.c 選字的部分,同時也有
一個網友 Joe <joe@os.nctu.edu.tw> 所提供的 patch (詳見
http://xcin.linux.org.tw/libtabe/index.html), 有興趣的朋友可以試
看看,在此感謝這位網友的提供。
以下是這一版 xcin 的 change log (相較於 xcin-2.5.1-1):
1. bimsphone bug fix: mcch choice problem for N%10 = 0 or 1, and '<', '>'
are not functional to change pages. Now page changes can be rotated, and
',', '.' keys are also used for change pages.
Thanks to joe <joe@os.nctu.edu.tw>.
2. bimsphone new function: add keyword SELEC_KEY in xcinrc to choose the
selection keys.
Thanks to Scott Tsai <scottt@tpts5.seed.net.tw>.
3. gui.c & bimsphone bug fix: fix the displaying problem for mcch when
N%10 = 1.
Thanks to joe and Scott Tsai.
4. bimsphone bug fix: don't send any irrelevent keys back to the XIM client
when bimsphone buffer is not empty, in order to work around with the
problem of netscape.
Thanks to platin <platin@linux.org.tw>.
hashao <hashao@china.com>.
(PS. to platin and hashao:
這個 bug 就是 platin 曾向我回報的,在 netscape + bimsphone 下若
xcin 視窗中有東東,隨意按左右上下等鍵 xcin 裏頭的東東會跟著消失。
由於 netscape 那樣的設計,我發現這個問題很難克服。因此,目前我就
採用了 hashao 的建議,當 xcin buffer 裏頭有東東時,您的上下左右
鍵無法直接傳入 XIM client 中,這樣的修改應該是合理的,因為此時您
是針對某個游標點輸入,只是輸入的東東仍 catch 在 xcin 裏頭而已,
故這時候您沒有任何理由需要移動 client 上的游標,除非您將 catch
在 xcin 裏頭的東東全部都送出去為止。但對於 netscape 的情況而言,
仍然是治標不治本,如果您使用滑鼠去移動游標的話,問題一樣會出現。
治本之道是希望下一版的 netscape 可以將此問題直接修正。
5. xcin-2.5/doc update.
當我在打這封 mail 時,才赫然發現 xcin-2.5.1-2 的 doc/ 裏頭有些內容忘了
加了,如 Changes 4 沒有 Thanks to hashao, 也沒有將該問題放入 FAQ ....
等等,對此疏忽真是很抱歉。我會將這些疏忽在下一個 release 時補足的 :-))
T.H.Hsieh
----- End forwarded message -----
Reply to: