Re: 声卡问题

To: "☈ Debian" <debian-chinese-gb@lists.debian.org>
Subject: Re: 声卡问题
From: Billy <etobilly@gmail.com>
Date: Wed, 15 Aug 2007 12:47:01 +0800
Message-id: <[🔎] ea440f230708142147x158c7717h7c813b1400752235@mail.gmail.com>
In-reply-to: <[🔎] 46C25B13.30306@163.com>
References: <[🔎] ea440f230708131838t2fc43a62o545c90e19860aad8@mail.gmail.com> <[🔎] 46C25B13.30306@163.com>

我就重启了一下机器，差距怎么这么大嗫？！
我一开机，登录，发现没有声音，把dmesg，lsmod和lspci都>出来，就重启了。登录就有声音了。
很费解啊！

On 8/15/07, 高超 <achaoge@163.com > wrote:

Billy wrote:
> hi，
> 我的笔记本是intel
> 815的声卡，在启动Debian的时候，只要在登陆画面出现的时候发出一声像pc喇叭嘟的一声，登陆进去声卡就没声音，放什么都不行。要是登陆的时候没有那一声，就没问题。所以每一次开机就是一次赌博，很烦躁。
> 各位高人，有没有知道怎么解决的啊？
在声卡能用的时候，保存以下命令的输出信息:
dmesg, lspci, lsmod
在声卡不能用的时候，比较同样的命令的信息。

ps. 如果把信息发到列表供大家分析的话，请不要直接粘贴，而用附件的方式。
> 谢过先

--
To UNSUBSCRIBE, email to debian-chinese-gb-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Linux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12etch2) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed May 9 23:03:12 UTC 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f7e0000 (usable)
 BIOS-e820: 000000003f7e0000 - 000000003f7e8000 (ACPI data)
 BIOS-e820: 000000003f7e8000 - 000000003f800000 (ACPI NVS)
 BIOS-e820: 000000003f800000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 260064
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 30688 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 Acer                                  ) @ 0x000fe030
ACPI: RSDT (v001 Acer   FALCON3M 0x00000001 Acer 0x00000000) @ 0x3f7e0000
ACPI: FADT (v001 Acer   FALCON3M 0x00000001 Acer 0x00000000) @ 0x3f7e0054
ACPI: BOOT (v001 Acer   FALCON3M 0x00000001 Acer 0x00000000) @ 0x3f7e002c
ACPI: DSDT (v001   Acer FALCON3M 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf108
Allocating PCI resources starting at 50000000 (gap: 40000000:bfff0000)
Detected 1133.261 MHz processor.
Built 1 zonelists.  Total pages: 260064
Kernel command line: root=/dev/hda5 ro 
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (017fc000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023140k/1040256k available (1544k kernel code, 16400k reserved, 577k data, 196k init, 122752k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2268.00 BogoMIPS (lpj=4536007)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c00)
CPU0: Intel(R) Celeron(TM) CPU                1133MHz stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4784k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI quirk: region f100-f17f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region f200-f23f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: ioport range 0x7b0-0x7bb has been reserved
pnp: 00:01: ioport range 0x7c0-0x7df has been reserved
pnp: 00:01: ioport range 0xbb0-0xbbb has been reserved
pnp: 00:01: ioport range 0xbc0-0xbdf has been reserved
pnp: 00:01: ioport range 0xfb0-0xfbb has been reserved
pnp: 00:01: ioport range 0xfc0-0xfdf has been reserved
pnp: 00:01: ioport range 0x13b0-0x13bb has been reserved
pnp: 00:01: ioport range 0x13c0-0x13df has been reserved
pnp: 00:0b: ioport range 0xf100-0xf16f could not be reserved
pnp: 00:0b: ioport range 0xf178-0xf17f has been reserved
pnp: 00:0b: ioport range 0xf200-0xf23f has been reserved
pnp: 00:0b: ioport range 0x380-0x38f has been reserved
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0x580-0x587 has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 2, cardbus bridge: 0000:01:09.0
  IO window: 00009400-000094ff
  IO window: 00009800-000098ff
  PREFETCH window: 50000000-51ffffff
  MEM window: 54000000-55ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 9000-9fff
  MEM window: a0100000-a01fffff
  PREFETCH window: 50000000-51ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [PILF] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [PILF] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x6e set to 0x1
audit: initializing netlink socket (disabled)
audit(1187136547.308:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:09 activated.
00:09: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [PILB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [PILB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THR1] (61 C)
ACPI: Thermal Zone [THR2] (55 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [PILA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000aca0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [PILD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [PILD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000ace0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [PILC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [PILC] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0x9000, 00:00:e2:84:d1:e2, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100'
ICH3M: IDE controller at PCI slot 0000:00:1f.1
ACPI: Unable to derive IRQ for device 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xb060-0xb067, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xb068-0xb06f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
usb 1-1: new low speed USB device using uhci_hcd and address 2
Time: acpi_pm clocksource has been installed.
usb 1-1: configuration #1 chosen from 1 choice
hda: TOSHIBA MK2018GAP, ATA DISK drive
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usbcore: registered new driver hiddev
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input1
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SR243T1, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB), CHS=38760/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0x98000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
input: PC Speaker as /class/input/input2
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [PILB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [PILB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Real Time Clock Driver v1.12ac
pnp: Device 00:07 activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
intel8x0_measure_ac97_clock: measured 55375 usecs
intel8x0: clocking to 48000
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [PILB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input3
Unable to initialize codec #0
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
Intel ICH Modem: probe of 0000:00:1f.6 failed with error -13
Yenta: CardBus bridge found at 0000:01:09.0 [1025:1024]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0098, PCI irq 10
Socket status: 30000821
Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
pcmcia: parent PCI bridge I/O window: 0x9000 - 0x9fff
cs: IO port probe 0x9000-0x9fff: clean.
pcmcia: parent PCI bridge Memory window: 0xa0100000 - 0xa01fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x4
codec_write 0: semaphore is not ready for register 0x4
codec_write 0: semaphore is not ready for register 0x6
codec_write 0: semaphore is not ready for register 0x6
codec_write 0: semaphore is not ready for register 0x12
codec_write 0: semaphore is not ready for register 0x12
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x68
pccard: CardBus card inserted into slot 0
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [PILF] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:00.0 to 64
ohci_hcd 0000:02:00.0: OHCI Host Controller
ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:02:00.0: irq 10, io mem 0x54000000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
PCI: Enabling device 0000:02:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [PILF] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:00.1 to 64
ohci_hcd 0000:02:00.1: OHCI Host Controller
ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:02:00.1: irq 10, io mem 0x54001000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Enabling device 0000:02:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.2[C] -> Link [PILF] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:02:00.2: EHCI Host Controller
ehci_hcd 0000:02:00.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:00.2: irq 10, io mem 0x54002000
ehci_hcd 0000:02:00.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
Adding 1020088k swap on /dev/hda6.  Priority:-1 extents:1 across:1020088k
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
cs: memory probe 0xa0100000-0xa01fffff: excluding 0xa0100000-0xa01fffff
cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
cs: memory probe 0x50000000-0x51ffffff: excluding 0x50000000-0x51ffffff
cs: warning: no high memory space available!
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: AC Adapter [AC] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth0: no IPv6 routers present
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized i915 1.5.0 20060119 on minor 0
[drm] Initialized i915 1.5.0 20060119 on minor 1
eth0: no IPv6 routers present
codec_write 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x68
codec_write 0: semaphore is not ready for register 0x2a
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x68
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x68
codec_write 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x2c
codec_write 0: semaphore is not ready for register 0x2a
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x2c
codec_write 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x68
codec_write 0: semaphore is not ready for register 0x2a
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x68
codec_write 0: semaphore is not ready for register 0x2a
codec_write 0: semaphore is not ready for register 0x2a
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x68
codec_write 0: semaphore is not ready for register 0x2a
codec_write 0: semaphore is not ready for register 0x2a
usb 5-1: new high speed USB device using ehci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
  Vendor: ST332062  Model: 0A                Rev:  0 0
  Type:   Direct-Access                      ANSI SCSI revision: 00
usb-storage: device scan complete
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 33 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 33 00 00 00
sda: assuming drive cache: write through
 sda: sda2
sd 0:0:0:0: Attached scsi disk sda
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
EXT2-fs warning: mounting fs with errors, running e2fsck is recommended
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2
codec_write 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x68
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x68
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x68
codec_write 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x2c
codec_write 0: semaphore is not ready for register 0x2a
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x2c
codec_write 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x2c
codec_read 0: semaphore is not ready for register 0x68
codec_write 0: semaphore is not ready for register 0x2a
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
codec_write 0: semaphore is not ready for register 0x18
usb 5-1: USB disconnect, address 2
sd 0:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sda2, logical block 34426
lost page write due to I/O error on sda2
Buffer I/O error on device sda2, logical block 34427
lost page write due to I/O error on sda2
sd 0:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sda2, logical block 7341072
lost page write due to I/O error on sda2
sd 0:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sda2, logical block 12256266
lost page write due to I/O error on sda2
sd 0:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sda2, logical block 12846089
lost page write due to I/O error on sda2
sd 0:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sda2, logical block 21890059
lost page write due to I/O error on sda2
sd 0:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sda2, logical block 23725067
lost page write due to I/O error on sda2
sd 0:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sda2, logical block 23757837
lost page write due to I/O error on sda2
sd 0:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sda2, logical block 23790605
lost page write due to I/O error on sda2
sd 0:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sda2, logical block 24314893
lost page write due to I/O error on sda2
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
sd 0:0:0:0: rejecting I/O to device being removed
scsi 0:0:0:0: rejecting I/O to dead device

Linux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12etch2) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed May 9 23:03:12 UTC 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f7e0000 (usable)
 BIOS-e820: 000000003f7e0000 - 000000003f7e8000 (ACPI data)
 BIOS-e820: 000000003f7e8000 - 000000003f800000 (ACPI NVS)
 BIOS-e820: 000000003f800000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 260064
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 30688 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 Acer                                  ) @ 0x000fe030
ACPI: RSDT (v001 Acer   FALCON3M 0x00000001 Acer 0x00000000) @ 0x3f7e0000
ACPI: FADT (v001 Acer   FALCON3M 0x00000001 Acer 0x00000000) @ 0x3f7e0054
ACPI: BOOT (v001 Acer   FALCON3M 0x00000001 Acer 0x00000000) @ 0x3f7e002c
ACPI: DSDT (v001   Acer FALCON3M 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf108
Allocating PCI resources starting at 50000000 (gap: 40000000:bfff0000)
Detected 1133.260 MHz processor.
Built 1 zonelists.  Total pages: 260064
Kernel command line: root=/dev/hda5 ro 
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (017fc000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023140k/1040256k available (1544k kernel code, 16400k reserved, 577k data, 196k init, 122752k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2268.02 BogoMIPS (lpj=4536050)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c00)
CPU0: Intel(R) Celeron(TM) CPU                1133MHz stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4784k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI quirk: region f100-f17f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region f200-f23f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: ioport range 0x7b0-0x7bb has been reserved
pnp: 00:01: ioport range 0x7c0-0x7df has been reserved
pnp: 00:01: ioport range 0xbb0-0xbbb has been reserved
pnp: 00:01: ioport range 0xbc0-0xbdf has been reserved
pnp: 00:01: ioport range 0xfb0-0xfbb has been reserved
pnp: 00:01: ioport range 0xfc0-0xfdf has been reserved
pnp: 00:01: ioport range 0x13b0-0x13bb has been reserved
pnp: 00:01: ioport range 0x13c0-0x13df has been reserved
pnp: 00:0b: ioport range 0xf100-0xf16f could not be reserved
pnp: 00:0b: ioport range 0xf178-0xf17f has been reserved
pnp: 00:0b: ioport range 0xf200-0xf23f has been reserved
pnp: 00:0b: ioport range 0x380-0x38f has been reserved
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0x580-0x587 has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 2, cardbus bridge: 0000:01:09.0
  IO window: 00009400-000094ff
  IO window: 00009800-000098ff
  PREFETCH window: 50000000-51ffffff
  MEM window: 54000000-55ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 9000-9fff
  MEM window: a0100000-a01fffff
  PREFETCH window: 50000000-51ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [PILF] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [PILF] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x6e set to 0x1
audit: initializing netlink socket (disabled)
audit(1187137365.304:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:09 activated.
00:09: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [PILB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [PILB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THR1] (58 C)
ACPI: Thermal Zone [THR2] (53 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
ACPI: Unable to derive IRQ for device 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xb060-0xb067, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xb068-0xb06f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
USB Universal Host Controller Interface driver v3.0
8139too Fast Ethernet driver 0.9.27
hda: TOSHIBA MK2018GAP, ATA DISK drive
Time: acpi_pm clocksource has been installed.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SR243T1, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt Link [PILA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000aca0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hda: max request size: 128KiB
ACPI: PCI Interrupt Link [PILD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [PILD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000ace0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [PILC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [PILC] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0x9000, 00:00:e2:84:d1:e2, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
hda: 39070080 sectors (20003 MB), CHS=38760/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 <<6>usb 1-1: new low speed USB device using uhci_hcd and address 2
 hda5 hda6 hda7 hda8 >
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usbcore: registered new driver hiddev
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input1
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Attempting manual resume
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
ts: Compaq touchscreen protocol output
intel_rng: FWH not detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0x98000000
input: PC Speaker as /class/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [PILB] -> GSI 10 (level, low) -> IRQ 10
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [PILB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pnp: Device 00:07 activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
Unable to initialize codec #0
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
Intel ICH Modem: probe of 0000:00:1f.6 failed with error -13
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [PILB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input3
intel8x0_measure_ac97_clock: measured 55694 usecs
intel8x0: clocking to 48000
Yenta: CardBus bridge found at 0000:01:09.0 [1025:1024]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0098, PCI irq 10
Socket status: 30000821
Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
pcmcia: parent PCI bridge I/O window: 0x9000 - 0x9fff
cs: IO port probe 0x9000-0x9fff: clean.
pcmcia: parent PCI bridge Memory window: 0xa0100000 - 0xa01fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
pccard: CardBus card inserted into slot 0
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [PILF] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:00.0 to 64
ohci_hcd 0000:02:00.0: OHCI Host Controller
ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:02:00.0: irq 10, io mem 0x54000000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
PCI: Enabling device 0000:02:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [PILF] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:00.1 to 64
ohci_hcd 0000:02:00.1: OHCI Host Controller
ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:02:00.1: irq 10, io mem 0x54001000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Enabling device 0000:02:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.2[C] -> Link [PILF] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:02:00.2: EHCI Host Controller
ehci_hcd 0000:02:00.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:00.2: irq 10, io mem 0x54002000
ehci_hcd 0000:02:00.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
Adding 1020088k swap on /dev/hda6.  Priority:-1 extents:1 across:1020088k
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
cs: memory probe 0xa0100000-0xa01fffff: excluding 0xa0100000-0xa01fffff
cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
cs: memory probe 0x50000000-0x51ffffff: excluding 0x50000000-0x51ffffff
cs: warning: no high memory space available!
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: AC Adapter [AC] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth0: no IPv6 routers present
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized i915 1.5.0 20060119 on minor 0
[drm] Initialized i915 1.5.0 20060119 on minor 1
eth0: no IPv6 routers present

Module                  Size  Used by
i915                   17600  2 
drm                    61332  3 i915
rfcomm                 34584  0 
l2cap                  21696  5 rfcomm
bluetooth              45956  4 rfcomm,l2cap
ppdev                   8676  0 
lp                     11012  0 
button                  6672  0 
ac                      5188  0 
battery                 9636  0 
ipv6                  226016  8 
nls_iso8859_1           4256  1 
nls_cp437               5920  1 
vfat                   11872  1 
fat                    46684  1 vfat
ext3                  119240  1 
jbd                    52456  1 ext3
mbcache                 8356  1 ext3
dm_snapshot            15552  0 
dm_mirror              19152  0 
dm_mod                 50232  2 dm_snapshot,dm_mirror
loop                   15048  0 
ehci_hcd               28136  0 
ohci_hcd               18276  0 
pcmcia                 34140  0 
firmware_class          9600  1 pcmcia
joydev                  9088  0 
yenta_socket           24460  2 
rsrc_nonstatic         11840  1 yenta_socket
pcmcia_core            36852  3 pcmcia,yenta_socket,rsrc_nonstatic
parport_pc             32132  1 
parport                33256  3 ppdev,lp,parport_pc
rtc                    12372  0 
snd_intel8x0m          15980  0 
floppy                 53156  0 
snd_intel8x0           30332  1 
snd_ac97_codec         83104  2 snd_intel8x0m,snd_intel8x0
snd_ac97_bus            2400  1 snd_ac97_codec
i2c_i801                7468  0 
snd_pcm_oss            38368  0 
snd_mixer_oss          15200  1 snd_pcm_oss
snd_pcm                68676  4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              20996  1 snd_pcm
psmouse                35016  0 
serio_raw               6660  0 
pcspkr                  3072  0 
snd                    47012  9 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore               9248  1 snd
snd_page_alloc          9640  3 snd_intel8x0m,snd_intel8x0,snd_pcm
i2c_core               19680  1 i2c_i801
shpchp                 33024  0 
pci_hotplug            28704  1 shpchp
intel_agp              21148  1 
agpgart                29896  3 drm,intel_agp
tsdev                   7520  0 
evdev                   9088  2 
reiserfs              212640  1 
ide_cd                 36064  0 
cdrom                  32544  1 ide_cd
ide_disk               14848  5 
usbhid                 37248  0 
8139cp                 21920  0 
piix                    9444  0 [permanent]
8139too                25120  0 
mii                     5344  2 8139cp,8139too
generic                 5476  0 [permanent]
ide_core              110504  4 ide_cd,ide_disk,piix,generic
uhci_hcd               21164  0 
usbcore               112644  5 ehci_hcd,ohci_hcd,usbhid,uhci_hcd
thermal                13608  0 
processor              28840  1 thermal
fan                     4804  0

Module                  Size  Used by
i915                   17600  2 
drm                    61332  3 i915
rfcomm                 34584  0 
l2cap                  21696  5 rfcomm
bluetooth              45956  4 rfcomm,l2cap
ppdev                   8676  0 
lp                     11012  0 
button                  6672  0 
ac                      5188  0 
battery                 9636  0 
ipv6                  226016  8 
nls_iso8859_1           4256  1 
nls_cp437               5920  1 
vfat                   11872  1 
fat                    46684  1 vfat
ext3                  119240  1 
jbd                    52456  1 ext3
mbcache                 8356  1 ext3
dm_snapshot            15552  0 
dm_mirror              19152  0 
dm_mod                 50232  2 dm_snapshot,dm_mirror
loop                   15048  0 
ehci_hcd               28136  0 
ohci_hcd               18276  0 
pcmcia                 34140  0 
firmware_class          9600  1 pcmcia
joydev                  9088  0 
yenta_socket           24460  2 
rsrc_nonstatic         11840  1 yenta_socket
pcmcia_core            36852  3 pcmcia,yenta_socket,rsrc_nonstatic
snd_intel8x0           30332  1 
parport_pc             32132  1 
parport                33256  3 ppdev,lp,parport_pc
floppy                 53156  0 
snd_intel8x0m          15980  0 
i2c_i801                7468  0 
rtc                    12372  0 
snd_ac97_codec         83104  2 snd_intel8x0,snd_intel8x0m
snd_ac97_bus            2400  1 snd_ac97_codec
snd_pcm_oss            38368  0 
snd_mixer_oss          15200  1 snd_pcm_oss
shpchp                 33024  0 
pci_hotplug            28704  1 shpchp
psmouse                35016  0 
serio_raw               6660  0 
pcspkr                  3072  0 
intel_agp              21148  1 
i2c_core               19680  1 i2c_i801
snd_pcm                68676  4 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss
snd_timer              20996  1 snd_pcm
snd                    47012  9 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore               9248  1 snd
snd_page_alloc          9640  3 snd_intel8x0,snd_intel8x0m,snd_pcm
agpgart                29896  3 drm,intel_agp
tsdev                   7520  0 
evdev                   9088  2 
reiserfs              212640  1 
usbhid                 37248  0 
8139cp                 21920  0 
ide_cd                 36064  0 
cdrom                  32544  1 ide_cd
ide_disk               14848  5 
8139too                25120  0 
mii                     5344  2 8139cp,8139too
uhci_hcd               21164  0 
piix                    9444  0 [permanent]
generic                 5476  0 [permanent]
ide_core              110504  4 ide_cd,ide_disk,piix,generic
usbcore               112644  5 ehci_hcd,ohci_hcd,usbhid,uhci_hcd
thermal                13608  0 
processor              28840  1 thermal
fan                     4804  0

00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04)
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:09.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller
02:00.0 USB Controller: NEC Corporation USB (rev 41)
02:00.1 USB Controller: NEC Corporation USB (rev 41)
02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 02)

00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04)
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:09.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller
02:00.0 USB Controller: NEC Corporation USB (rev 41)
02:00.1 USB Controller: NEC Corporation USB (rev 41)
02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 02)

Reply to:

Follow-Ups:
- Re: 声卡问题
  - From: "Wang Xu" <gnawux@gmail.com>
- Re: 声卡问题
  - From: "Jiahua Huang" <jhuangjiahua@gmail.com>

References:
- 声卡问题
  - From: Billy <etobilly@gmail.com>
- Re: 声卡问题
  - From: 高超 <achaoge@163.com>

Prev by Date: Re: 声卡问题
Next by Date: Re: 声卡问题
Previous by thread: Re: 声卡问题
Next by thread: Re: 声卡问题
Index(es):
- Date
- Thread