Re: nvidia虽然配置好了，但是x还是_不来:(

[Alex Lau <alex@dentonlive.com>]

wqinian rao 提到:
>好不容易把nvidia装上，结果安装x的时候（以前什么X都没有装）现在才开始装X包，比如task-x-window-system-core
>等，
>但是安装task-x-window-system却要把xfree86等删了才能装那两个rstart
>and rstartd，但是装了后再装task-x-window-system
>的时候又要xfree86等，又要把rstart and
>rstartd删了。如此反复
>不知道如何装了。我就没有装task-x-window-system,用
>dpkg-reconfigure
>
I never like the virtual package like task-x-window-system.
To much dependence problem. If you are using sid, I know the
x-window-system package work.

>xserver-xfree86，应该配置没有错吧，选那个什么的时候我选nvidia没有错吧？安装完，我运行startx的时候却说Failed
>to initialize the Nvdriver kernel module，和
>XIO:fatal 20 error 104(Connection reset by peer) on
>Xserver ":0:0"after 0 request (0 know processed) with 0 events remainiy
>如果运行XFree86就出现Failed to initialize the Nvdriver
>kernel module和Fatal server error no screens found
>请问是哪里出错了？？我在dpkg-reconfigure的时候，好象问了个显卡的bus吧，我没有写，因为lspci没有显示那格式啊，比如
>pic:xx:xx:xx只有最开始显示01:00.0，我这样输进去，结果却
>
after you install the module for nvdriver did you load it?
run $>lsmod see you loaded it, if not $>modconf and load that.
if you have kernel-module loaded and X wouldn't start
the X driver may not work with the kernel-module.
run $>XFree86 -configure as root, that will give you a config file
in root home, match and see the different with your
/etc/X11/XF86Config-4 file.
Usually it will get the pci scan done for you also.
Good luck
Alex

-- 
To UNSUBSCRIBE, email to debian-chinese-big5-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

-- 
| This message was re-posted from debian-chinese-big5@lists.debian.org
| and converted from big5 to gb2312 by an automatic gateway.


-- 
To UNSUBSCRIBE, email to debian-chinese-gb-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org