grub2 2.02~beta2-18: Please update debconf PO translation for the package grub2
Hi,
You are noted as the last translator of the debconf translation for
grub2. The English template has been changed, and now some messages
are marked "fuzzy" in your translation or are missing.
I would be grateful if you could take the time and update it.
Please send the updated file to me, or submit it as a wishlist bug
against grub2.
The deadline for receiving the updated translation is
Sun, 21 Dec 2014 19:58:50 +0000.
Thanks in advance,
Ian.
# Copyright (C) 2009 Tetralet
# This file is distributed under the same license as the grub2 package.
#
msgid ""
msgstr ""
"Project-Id-Version: grub2\n"
"Report-Msgid-Bugs-To: grub2@packages.debian.org\n"
"POT-Creation-Date: 2014-12-07 16:09+0000\n"
"PO-Revision-Date: 2012-04-22 17:31-0700\n"
"Last-Translator: Vincent Chen <vinmun@gmail.com>\n"
"Language-Team: Debian-user in Chinese [Big5] <debian-chinese-big5@lists."
"debian.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "Chainload from menu.lst?"
msgstr "是否使用來自 menu.list 的 chainload 項目？"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "GRUB upgrade scripts have detected a GRUB Legacy setup in /boot/grub."
msgstr "GRUB 升級程式已在 /boot/grub 裡找到了 GRUB Legacy 的設定。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"In order to replace the Legacy version of GRUB in your system, it is "
"recommended that /boot/grub/menu.lst is adjusted to load a GRUB 2 boot image "
"from your existing GRUB Legacy setup. This step can be automatically "
"performed now."
msgstr ""
"為了要能取代您系統上 Legacy 版的 GRUB，建議能修改 /boot/grub/menu.lst 來讓您"
"原本的 GRUB Legacy 設定能載入 GRUB 2 影像檔。現在將要自動進行這個步驟。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"It's recommended that you accept chainloading GRUB 2 from menu.lst, and "
"verify that the new GRUB 2 setup works before it is written to the MBR "
"(Master Boot Record)."
msgstr ""
"在直接將 GRUB 2 安裝到 MBR（主要開機記錄）之前，建議您能同意在 menu.lst 裡先"
"以 chainload 的方式啟動 GRUB 2，以確認新的 GRUB 2 設定能正常運作。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"Whatever your decision, you can replace the old MBR image with GRUB 2 later "
"by issuing the following command as root:"
msgstr ""
"不管您的決定為何，您可以隨時讓 GRUB 2 取代舊有的 MBR 影像檔利用 root 身份執行"
"以下指令："
#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001 ../grub-pc.templates.in:4001
msgid "GRUB install devices:"
msgstr "GRUB 安裝裝置："
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
msgid ""
"The grub-pc package is being upgraded. This menu allows you to select which "
"devices you'd like grub-install to be automatically run for, if any."
msgstr ""
"grub-pc 套件正在升級。這個選單讓您選擇 grub-install 要在哪一個裝置上自動執"
"行，如果有的話。"
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
msgid ""
"Running grub-install automatically is recommended in most situations, to "
"prevent the installed GRUB core image from getting out of sync with GRUB "
"modules or grub.cfg."
msgstr ""
"在大多情況下建議自動執行 grub-install，以必免 GRUB 核心影像和 GRUB 模組或 "
"grub.cfg 拖步。"
#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001 ../grub-pc.templates.in:4001
msgid ""
"If you're unsure which drive is designated as boot drive by your BIOS, it is "
"often a good idea to install GRUB to all of them."
msgstr ""
"如果您不確定 BIOS 用哪個磁碟作為開機磁碟，通常安裝 GRUB 到所有磁碟是個不錯的"
"選擇。"
#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001 ../grub-pc.templates.in:4001
msgid ""
"Note: it is possible to install GRUB to partition boot records as well, and "
"some appropriate partitions are offered here. However, this forces GRUB to "
"use the blocklist mechanism, which makes it less reliable, and therefore is "
"not recommended."
msgstr ""
"注意：也可以將 GRUB 安裝到分割的開機記錄，這裡也提供了一些適當的分割選項。但"
"是，GRUB 將被迫使用黑名單機制，導致可靠性降低，因此不建議使用。"
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:4001
msgid ""
"The GRUB boot loader was previously installed to a disk that is no longer "
"present, or whose unique identifier has changed for some reason. It is "
"important to make sure that the installed GRUB core image stays in sync with "
"GRUB modules and grub.cfg. Please check again to make sure that GRUB is "
"written to the appropriate boot devices."
msgstr ""
"GRUB 的開機程式先前安裝到一個消失的磁碟上，或者它的唯一標識符因某種原因改變。"
"確保安裝的 GRUB 核心映像和 GRUB 模組及 grub.cfg 的同步是非常重要的。請再次檢"
"查以確保 GRUB 安裝到適當的開機裝置。"
#. Type: text
#. Description
#. Disk sizes are in decimal megabytes, to match how disk manufacturers
#. usually describe them.
#: ../grub-pc.templates.in:5001
msgid "${DEVICE} (${SIZE} MB; ${MODEL})"
msgstr "${DEVICE} (${SIZE} MB; ${MODEL})"
#. Type: text
#. Description
#. The "-" is used to indicate indentation. Leading spaces may not work.
#: ../grub-pc.templates.in:6001
msgid "- ${DEVICE} (${SIZE} MB; ${PATH})"
msgstr "- ${DEVICE} (${SIZE} MB; ${PATH})"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid "Writing GRUB to boot device failed - continue?"
msgstr "將 GRUB 寫入開機裝置失敗了。是否繼續？"
#. Type: boolean
#. Description
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001 ../grub-pc.templates.in:8001
msgid "GRUB failed to install to the following devices:"
msgstr "在將 GRUB 安裝至以下裝置時失敗了："
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid ""
"Do you want to continue anyway? If you do, your computer may not start up "
"properly."
msgstr "是否無論如何仍然繼續？但這樣話，您的電腦可能會無法正常開機。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid "Writing GRUB to boot device failed - try again?"
msgstr "將 GRUB 寫入開機裝置失敗了。再試一次？"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid ""
"You may be able to install GRUB to some other device, although you should "
"check that your system will boot from that device. Otherwise, the upgrade "
"from GRUB Legacy will be canceled."
msgstr ""
"您也許可以把 GRUB 安裝至其它的裝置，只是您得設定好您的系統會從該裝置開機。否"
"則，將中止 GRUB Legacy 的升級。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid "Continue without installing GRUB?"
msgstr "是否不安裝 GRUB 並繼續？"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid ""
"You chose not to install GRUB to any devices. If you continue, the boot "
"loader may not be properly configured, and when this computer next starts up "
"it will use whatever was previously in the boot sector. If there is an "
"earlier version of GRUB 2 in the boot sector, it may be unable to load "
"modules or handle the current configuration file."
msgstr ""
"您決定了不將 GRUB 安裝至任何裝置。如果您繼續，開機程式可能未經適當得設定，且"
"當您電腦下次開機時，它會使用原本就位於開機磁區上的東西，而這可能會導至模組無"
"法載入，或是無法處理目前所使用的設定檔。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid ""
"If you are already using a different boot loader and want to carry on doing "
"so, or if this is a special environment where you do not need a boot loader, "
"then you should continue anyway. Otherwise, you should install GRUB "
"somewhere."
msgstr ""
"如果您已在使用其它的開機程式，並且打算繼續使用；或是您的環境十分特殊所以不需"
"要開機程式，您可以不在意並繼續進行。否則，您應當找個地方安裝 GRUB。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:10001
msgid "Remove GRUB 2 from /boot/grub?"
msgstr "是否將 GRUB 2 從 /boot/grub 移除？"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:10001
msgid "Do you want to have all GRUB 2 files removed from /boot/grub?"
msgstr "您是否想將所有 GRUB 2 的檔案從 /boot/grub 移除？"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:10001
msgid ""
"This will make the system unbootable unless another boot loader is installed."
msgstr "除非安裝另一個開機程式，否則將會造成系統無法開機。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid "Finish conversion to GRUB 2 now?"
msgstr "是否要結束 GRUB 2 的轉換過程？"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"This system still has files from the GRUB Legacy boot loader installed, but "
"it now also has GRUB 2 boot records installed on these disks:"
msgstr ""
"這個系統上仍保有之前安裝 GRUB Legacy 所遺留下來的檔案，但它已有 GRUB 2 安裝於"
"以下磁碟的開機磁區："
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"It seems likely that GRUB Legacy is no longer in use, and that you should "
"instead upgrade the GRUB 2 images on these disks and finish the conversion "
"to GRUB 2 by removing old GRUB Legacy files. If you do not upgrade these "
"GRUB 2 images, then they may be incompatible with the new packages and cause "
"your system to stop booting properly."
msgstr ""
"這很可能表示再也用不到 GRUB Legacy 了，您應該替而升級這些裝置上的 GRUB 2 影像"
"檔，並移除這些 GRUB Legacy 所遺留下來的檔案，以結束 GRUB 2 的轉換過程。如果您"
"沒升級這些 GRUB 2 影像檔的話，它們可能和新的套件不相容，且會導致您的系統無法"
"正常開機。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"You should generally finish the conversion to GRUB 2 unless these boot "
"records were created by a GRUB 2 installation on some other operating system."
msgstr ""
"您應當逐漸得結束 GRUB 2 的轉換過程，除非這些開機記錄是由其它的作業系統所安裝"
"的 GRUB 2 建立的。"
#. Type: string
#. Description
#: ../templates.in:1001
msgid "Linux command line:"
msgstr "Linux 命令列："
#. Type: string
#. Description
#: ../templates.in:1001
msgid ""
"The following Linux command line was extracted from /etc/default/grub or the "
"`kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is "
"correct, and modify it if necessary. The command line is allowed to be empty."
msgstr ""
"以下的 Linux 命令列是由 /etc/default/grub，或是由 GRUB Legacy 的 menu.lst 中"
"的 `kopt' 參數所擷取出來的。請確認它是否正確，若有必要請加以修改。此命令列可"
"以留空。"
#. Type: string
#. Description
#: ../templates.in:2001
msgid "Linux default command line:"
msgstr "Linux 預設命令列："
#. Type: string
#. Description
#: ../templates.in:2001
msgid ""
"The following string will be used as Linux parameters for the default menu "
"entry but not for the recovery mode."
msgstr ""
"以下的字串將會用在預設的選單項目中做為 Linux 參數，但不會用於回復模式。"
#. Type: boolean
#. Description
#: ../templates.in:3001
msgid "Force extra installation to the EFI removable path?"
msgstr ""
#. Type: boolean
#. Description
#: ../templates.in:3001
msgid ""
"Some EFI-based systems are buggy and do not handle new bootloaders "
"correctly. If you force extra installation of GRUB to the EFI removable "
"path, it should make sure that this system will boot Debian correctly "
"despite such a problem. However, this may remove the ability to boot any "
"other operating systems that also depend on this path. If so, you will need "
"to ensure that GRUB is configured successfully to be able boot any other OS "
"installations correctly."
msgstr ""
#. Type: string
#. Description
#: ../templates.in:4001
msgid "kFreeBSD command line:"
msgstr "kFreeBSD 命令列："
#. Type: string
#. Description
#: ../templates.in:4001
msgid ""
"The following kFreeBSD command line was extracted from /etc/default/grub or "
"the `kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is "
"correct, and modify it if necessary. The command line is allowed to be empty."
msgstr ""
"以下的 kFreeBSD 命令列是由 /etc/default/grub，或是由 GRUB Legacy 的 menu.lst "
"中的 `kopt' 參數所擷取出來的。請確認它是否正確，若有必要請加以修改。此命令列"
"可以留空。"
#. Type: string
#. Description
#: ../templates.in:5001
msgid "kFreeBSD default command line:"
msgstr "kFreeBSD 預設命令列："
#. Type: string
#. Description
#: ../templates.in:5001
msgid ""
"The following string will be used as kFreeBSD parameters for the default "
"menu entry but not for the recovery mode."
msgstr ""
"以下的字串將會用在預設的選單項目中做為 kFreeBSD 參數，但不會用於回復模式。"
#. Type: note
#. Description
#: ../templates.in:6001
msgid "/boot/grub/device.map has been regenerated"
msgstr "已重新產生 /boot/grub/device.map"
#. Type: note
#. Description
#: ../templates.in:6001
msgid ""
"The file /boot/grub/device.map has been rewritten to use stable device "
"names. In most cases, this should significantly reduce the need to change it "
"in future, and boot menu entries generated by GRUB should not be affected."
msgstr ""
"/boot/grub/device.map 這個檔案已使用不變的裝置名稱重新寫入。在大多數的狀況之"
"下，如此可以有效得避免在日後還會有什麼變動，且也不會影響到 GRUB 所產生的選單"
"項目。"
#. Type: note
#. Description
#: ../templates.in:6001
msgid ""
"However, since more than one disk is present in the system, it is possible "
"that the system is depending on the old device map. Please check whether "
"there are any custom boot menu entries that rely on GRUB's (hdN) drive "
"numbering, and update them if necessary."
msgstr ""
"但由於您的系統上不只安裝了一顆硬碟，舊的裝置對應表可能還在使用中。請檢視您是"
"否有還在使用著 GRUB 的 (hdN) 磁碟命名規則的自訂開機項目，若有必要請加以更新。"
#. Type: note
#. Description
#: ../templates.in:6001
msgid ""
"If you do not understand this message, or if there are no custom boot menu "
"entries, you can ignore this message."
msgstr "如果您不了解這些訊息，或著沒有任何自訂的開機項目，您可以忽略這個訊息。"
#~ msgid ""
#~ "In either case, whenever you want GRUB 2 to be loaded directly from MBR, "
#~ "you can do so by issuing (as root) the following command:"
#~ msgstr ""
#~ "不管您要採取何種方式，當您想讓 GRUB 2 可以由 MBR 直接啟動的話，您可以（以 "
#~ "root 身份）執行以下的指令："
#~ msgid "GRUB installation failed. Continue?"
#~ msgstr "GRUB 安裝失敗了。是否繼續？"
Reply to: