rescue: f5.txt 請校對
%%%%%%%%%%%%%% 翻譯
0f特定的啟動參數 - 各種硬件07
您可以在提示符 0fboot:07 後使用以下啟動參數，可同啟動方式(見<09F307>)一起使用。如果
您要使用十六進制數值，您必須使用前綴0x(形如0x300)。
0f硬件 指定的參數07
單色顯示器 0fmono07
顯示器不使用幀緩沖(fb)模式 0fvideo=vc:807
IBM PS/1或者ValuePoint(IDE磁盤) 0fhd=0b柱面數0f,0b磁頭數0f,0b扇區數07
IBM ThinkPad 0ffloppy=thinkpad07
IBM Pentium Microchannel 0fmca-pentium no-hlt07
保護I/O端口區域 0freserve=0biobase0f,0bextent07[0f,0b...07]
補償有缺限的 FPU (舊型機器) 0fno38707
高級電源管理 0fapm=on07
0f以太網絡設備︰07
一些以太網絡設備和專用的光驅驅動程序是以模塊方式加載的。對于這類驅動程序，
在安裝過程當中才需要給出參數，啟動的時候不需要。詳情請查閱"安裝手冊"。
請按<09回車鍵07>或者輸入啟動方式，參數，然後按<09回車鍵07>啟動。
請按功能鍵 <09F107> 查閱幫助索引頁面。
%%%%%%%%%%%%%%%%%%%%%%%
0fSPECIAL BOOT ARGUMENTS - VARIOUS HARDWARE07
You can use the following boot arguments at the 0fboot:07 prompt,
in combination with the boot method (see <09F307>).
If you use hex numbers you have to use the 0x prefix (e.g., 0x300).
0fHARDWARE PARAMETER TO SPECIFY07
Monochrome monitor 0fmono07
Disable framebuffer for monitor 0fvideo=vc:807
IBM PS/1 or ValuePoint (IDE disk) 0fhd=0bcylinders0f,0bheads0f,0bsectors07
IBM ThinkPad 0ffloppy=thinkpad07
IBM Pentium Microchannel 0fmca-pentium no-hlt07
Protect I/O port regions 0freserve=0biobase0f,0bextent07[0f,0b...07]
Workaround faulty FPU (old machines) 0fno38707
Advanced Power Management 0fapm=on07
0fEthernet:07
Some ethernet and proprietary CD-ROM drivers are loaded as modules.
For such drivers, give parameters for them during the installation
process, not at boot. See the Installation Manual for details.
Press <09ENTER07> or type boot method, arguments, and <09ENTER07> to boot.
Press function key <09F107> for the help index.
%%%%%%%%%%%%%%%%%%%%
--
Best regard
hashao
--
To UNSUBSCRIBE, email to debian-chinese-gb-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
--
| This message was re-posted from debian-chinese-gb@lists.debian.org
| and converted from gb2312 to big5 by an automatic gateway.
Reply to: