[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#584990: marked as done (debian-installer: "expert" mode install on PowerPC doesn't ask "expert" mode questions)

Your message dated Fri, 04 May 2012 15:32:55 +0000
with message-id <E1SQKV5-0005RW-Py@franck.debian.org>
and subject line Bug#636265: fixed in debian-cd 3.1.8
has caused the Debian Bug report #636265,
regarding debian-installer: "expert" mode install on PowerPC doesn't ask "expert" mode questions
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org

636265: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=636265
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: debian-installer
Version: testing "businesscard" sid_d-i Binary-1 20100608-04:27
Severity: important

Download the current businesscard iso:

	Daily build #3 for powerpc, using installer build from sid
	This build finished at Tue Jun 8 04:29:30 UTC 2010.
	[   ] debian-testing-powerpc-businesscard.iso            08-Jun-2010 06:28   67M  
Burn it to CD-R
Boot that CD on G4 PowerMac
Choose "expert" mode install
At the "choose language" screen, go "back"
at main menu, choose "change priority"
observer that priority is set to "high" even though I chose "expert" at boot.
change to low and continue installation normally in "expert" mode.

Without the "change to low" step, it continues as if I had chosen "install" rather than "expert"...

Installation fails later due to (presumably) unrelated bug -- reported elsewhere.
So this bug report is being done on the same hardware but with a working (older) installation.

install.tar.gz logs attached.

-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: powerpc (ppc)

Kernel: Linux 2.6.32-5-powerpc
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash

Attachment: install.tar.gz
Description: GNU Zip compressed data

--- End Message ---
--- Begin Message ---
Source: debian-cd
Source-Version: 3.1.8

We believe that the bug you reported is fixed in the latest version of
debian-cd, which is due to be installed in the Debian FTP archive:

  to main/d/debian-cd/debian-cd_3.1.8.dsc
  to main/d/debian-cd/debian-cd_3.1.8.tar.gz
  to main/d/debian-cd/debian-cd_3.1.8_all.deb

A summary of the changes between this version and the previous one is

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 636265@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
Steve McIntyre <93sam@debian.org> (supplier of updated debian-cd package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)

Hash: SHA256

Format: 1.8
Date: Fri, 04 May 2012 16:13:42 +0100
Source: debian-cd
Binary: debian-cd
Architecture: source all
Version: 3.1.8
Distribution: unstable
Urgency: low
Maintainer: Debian CD Group <debian-cd@lists.debian.org>
Changed-By: Steve McIntyre <93sam@debian.org>
 debian-cd  - Tools for building (Official) Debian CD set
Closes: 495102 636265 648690 650926 651530 662234
 debian-cd (3.1.8) unstable; urgency=low
   [ Steve McIntyre ]
   * Switch i386 kernel flavours again on advice from Ben:
     + Removed all mention of 686-bigmem as it's now gone
     + Added 686-pae onto CD#1 in place of 686
     + Leave the 486 kernel on CD#1 still, for people who can't use 686-pae
     + Add zfsutils into the generate_d-i+k_list for kfreebsd users.
   * Add support for translated package description files. Closes: #495102
     + Add needed dependency on bzip2
     + Other minor cleanups in tools/make_disc_trees.pl
   * Fix "expert" mode in yaboot for powerpc. Closes: #636265. Thanks to
     Milan Kupcevic for the patch.
   * Update list of Linux kernel packages. Closes: #648690. Thanks to Ben
     Hutchings for the patch.
   * Remove lots of old stuff neither needed nor supported any more:
     + removed architectures: alpha arm hppa
     + removed releases: etch lenny
     + removed unversioned data/sparc and data/yaboot, versioned
       equivalents are in place already.
   * tools/generate_firmware_task: Add LOCALDEBS support
   * Add more armel kernel flavours
   * Add armhf as a known architecture, merging common armel/armhf boot
     setup scripts.
   * Remove hppa boot script, unsupported now.
   * Tweak command line options for creating source images: add -joliet-long
   [ Joey Hess ]
   * Read tasksel's debian-tasks.desc from its new location.
   [ Ian Campbell ]
   * Rename "xm-debian.cfg" to just "debian.cfg" for Xen config.
   [ Raphaël Hertzog ]
   * Changes triggered by various lintian warnings:
     + Switch to “3.0 (native)” source format to get rid of .svn
       directories in the source package (when built from the svn checkout
     + Support build-arch/build-indep targets in debian/rules.
     + Drop executable rights from tools/boot/wheezy/boot-hurd
       (and fix debian/rules to not re-add it).
     + Bump Standards-Version to 3.9.2 (no change required).
   [ Philipp Kern ]
   * Add an extra tweaked version of d390.ins for s390 booting. The
     Hardware Management Console needs the file to be in the root
   [ Robert Millan ]
   * Add kfreebsd 9. Closes: #650926
   * Add graphical installer image for kfreebsd-amd64. Closes: #651530
   * generate_d-i+k_list: Add ufutils. Closes: #662234
 65db70665693120dc7f34a925eaf896fbed5bb84 1676 debian-cd_3.1.8.dsc
 066b073a23ff67185d882a321b3b81a1374e6f69 837073 debian-cd_3.1.8.tar.gz
 00a43b120d053525946649aaa414a389f0721ade 844840 debian-cd_3.1.8_all.deb
 12ff2cd6c14b63568c2b4380a8622b3854cfa23077df4f56edb2b63df2656b50 1676 debian-cd_3.1.8.dsc
 1e6858005bd07a7d7bc6c44a650338137285f9a8effaf484ead91ed274ce5b2f 837073 debian-cd_3.1.8.tar.gz
 8e841a0a1ef7ae84724d499e4915707d693eca5be396549e983aacf02c683269 844840 debian-cd_3.1.8_all.deb
 6087fd075d6d2f40c7ca40faceb06a92 1676 admin extra debian-cd_3.1.8.dsc
 4692a91d15af7ec102786dd6854b18a3 837073 admin extra debian-cd_3.1.8.tar.gz
 1ac0a12fa62cf94fb1ef84965ba6b00d 844840 admin extra debian-cd_3.1.8_all.deb

Version: GnuPG v1.4.10 (GNU/Linux)


--- End Message ---

Reply to: