Package: cdimage.debian.org
Today I've created (by jigdo) squeeze image: I wanted to nstall amd64
distro. I choosed dvd device to boot and saw squeeze installer's boot
screen. It asked what to do: graphical or text mode, etc. But my USB
keyword didn't work in this screen, so I couldn't continue installing.
A few years ago I installed debian/lenny/i386 on this host without any
problem. BIOS supports the keyword properly, too.
I was forced to install debian using debootstrap + knoppix (6.2).
Knoppix's first screen works properly with my keyboard:
Bus 001 Device 004: ID 177f:0060 Sweex (see lsusb.txt in attache)
Squeeze (which was installed using debootstrap) supports the keyword,
too (I write this mail from this host).
I've attached dmidecode.txt, dmesg.txt and lsusb.txt. They contain
output of the same program.
--
... mpd is off
. ''`. Dmitry E. Oboukhov
: :’ : email: unera@debian.org jabber://UNera@uvw.ru
`. `~’ GPGKey: 1024D / F8E26537 2006-11-21
`- 1B23 D4F8 8EC0 D902 0555 E438 AB8C 00CF F8E2 6537
# dmidecode 2.9 SMBIOS 2.4 present. 38 structures occupying 1179 bytes. Table at 0x000F0100. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Award Software International, Inc. Version: F4 Release Date: 06/19/2008 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 1024 kB Characteristics: PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Gigabyte Technology Co., Ltd. Product Name: EP43-DS3L Version: Serial Number: UUID: 00000000-0000-0000-0000-001FD08879C6 Wake-up Type: Power Switch SKU Number: Family: Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: Gigabyte Technology Co., Ltd. Product Name: EP43-DS3L Version: x.x Serial Number: Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: Gigabyte Technology Co., Ltd. Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: Socket 775 Type: Central Processor Family: Other Manufacturer: Intel ID: 77 06 01 00 FF FB EB BF Version: Intel(R) Core(TM)2 Quad CPU Voltage: 1.0 V External Clock: 333 MHz Max Speed: 4000 MHz Current Speed: 2333 MHz Status: Populated, Enabled Upgrade: Socket 478 L1 Cache Handle: 0x000A L2 Cache Handle: 0x000B L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Handle 0x0005, DMI type 5, 24 bytes Memory Controller Information Error Detecting Method: 8-bit Parity Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 4096 MB Supported Speeds: Other Supported Memory Types: Other Memory Module Voltage: 5.0 V Associated Memory Slots: 4 0x0006 0x0007 0x0008 0x0009 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: A0 Bank Connections: 1 Current Speed: Unknown Type: Other Installed Size: 2048 MB (Single-bank Connection) Enabled Size: 2048 MB (Single-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: A1 Bank Connections: 2 Current Speed: Unknown Type: Other Installed Size: 2048 MB (Single-bank Connection) Enabled Size: 2048 MB (Single-bank Connection) Error Status: OK Handle 0x0008, DMI type 6, 12 bytes Memory Module Information Socket Designation: A2 Bank Connections: 3 Current Speed: Unknown Type: Other Installed Size: 2048 MB (Single-bank Connection) Enabled Size: 2048 MB (Single-bank Connection) Error Status: OK Handle 0x0009, DMI type 6, 12 bytes Memory Module Information Socket Designation: A3 Bank Connections: 4 Current Speed: Unknown Type: Other Installed Size: 2048 MB (Single-bank Connection) Enabled Size: 2048 MB (Single-bank Connection) Error Status: OK Handle 0x000A, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 64 KB Maximum Size: 64 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000B, DMI type 7, 19 bytes Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 2048 KB Maximum Size: 2048 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: External Connector Type: None Port Type: Other Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: External Connector Type: None Port Type: Other Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: Other External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: Detected External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB Internal Connector Type: None External Reference Designator: External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB Internal Connector Type: None External Reference Designator: External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0016, DMI type 9, 13 bytes System Slot Information Designation: PCI Type: 32-bit PCI Current Usage: Available Length: Long ID: 0 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0017, DMI type 9, 13 bytes System Slot Information Designation: PCI Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0018, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x0019, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x001A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Speed: 667 MHz (1.5 ns) Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x001B, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Speed: 667 MHz (1.5 ns) Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x001C, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: A2 Bank Locator: Bank4/5 Type: Unknown Type Detail: None Speed: 667 MHz (1.5 ns) Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x001D, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: A3 Bank Locator: Bank6/7 Type: Unknown Type Detail: None Speed: 667 MHz (1.5 ns) Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x001E, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x001FFFFFFFF Range Size: 8 GB Physical Array Handle: 0x0019 Partition Width: 32 Handle 0x001F, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x001A Memory Array Mapped Address Handle: 0x001E Partition Row Position: 1 Handle 0x0020, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x001B Memory Array Mapped Address Handle: 0x001E Partition Row Position: 1 Handle 0x0021, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00100000000 Ending Address: 0x0017FFFFFFF Range Size: 2 GB Physical Device Handle: 0x001C Memory Array Mapped Address Handle: 0x001E Partition Row Position: 1 Handle 0x0022, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00180000000 Ending Address: 0x001FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x001D Memory Array Mapped Address Handle: 0x001E Partition Row Position: 1 Handle 0x0023, DMI type 32, 11 bytes System Boot Information Status: No errors detected Handle 0x0024, DMI type 64, 13 bytes Unknown Type Header and Data: 40 0D 24 00 00 1F D0 88 79 C6 FF FF B4 Strings: Handle 0x0025, DMI type 127, 4 bytes End Of Table
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-29) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 15:35:08 UTC 2010 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=2d99d2b7-b4ef-4749-8de8-2ec39f514a60 ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask FC0000000 write-back [ 0.000000] 4 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfee0000 page 4k [ 0.000000] kernel direct mapping tables up to bfee0000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] 0100000000 - 0240000000 page 2M [ 0.000000] kernel direct mapping tables up to 240000000 @ b000-15000 [ 0.000000] RAMDISK: 3769d000 - 37fef61d [ 0.000000] ACPI: RSDP 00000000000f6e30 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000bfee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000bfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000bfee3180 04B82 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000bfee0000 00040 [ 0.000000] ACPI: HPET 00000000bfee7e80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000bfee7f00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000bfee7d80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000bfee8860 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000005ffff] pages 48 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0240000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000168a414] TEXT DATA BSS ==> [0001000000 - 000168a414] [ 0.000000] #3 [003769d000 - 0037fef61d] RAMDISK ==> [003769d000 - 0037fef61d] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [000168b000 - 000168b0f6] BRK ==> [000168b000 - 000168b0f6] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000] [ 0.000000] found SMP MP-table at [ffff8800000f5440] f5440 [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfee0 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2096767 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767768 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000 [ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000 [ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000 [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008a00000 s90328 r8192 d24360 u524288 [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064404 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=2d99d2b7-b4ef-4749-8de8-2ec39f514a60 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880008b9e000 - ffff88000cb9e000 [ 0.000000] software IO TLB at phys 0x8b9e000 - 0xcb9e000 [ 0.000000] Memory: 8189244k/9437184k available (3078k kernel code, 1050116k absent, 197824k reserved, 1892k data, 592k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2333.298 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.59 BogoMIPS (lpj=9333192) [ 0.004024] Security Framework initialized [ 0.004028] SELinux: Disabled at boot. [ 0.004626] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010107] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011660] Mount-cache hash table entries: 256 [ 0.011800] Initializing cgroup subsys ns [ 0.011805] Initializing cgroup subsys cpuacct [ 0.011808] Initializing cgroup subsys devices [ 0.011810] Initializing cgroup subsys freezer [ 0.011812] Initializing cgroup subsys net_cls [ 0.011834] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.011836] CPU: L2 cache: 2048K [ 0.011839] CPU 0/0x0 -> Node 0 [ 0.011841] CPU: Physical Processor ID: 0 [ 0.011842] CPU: Processor Core ID: 0 [ 0.011845] mce: CPU supports 6 MCE banks [ 0.011852] CPU0: Thermal monitoring enabled (TM2) [ 0.011857] using mwait in idle threads. [ 0.011858] Performance Events: Core2 events, Intel PMU driver. [ 0.011863] ... version: 2 [ 0.011865] ... bit width: 40 [ 0.011866] ... generic registers: 2 [ 0.011867] ... value mask: 000000ffffffffff [ 0.011868] ... max period: 000000007fffffff [ 0.011870] ... fixed-purpose events: 3 [ 0.011871] ... event mask: 0000000700000003 [ 0.012854] ACPI: Core revision 20090903 [ 0.018961] Setting APIC routing to flat [ 0.019266] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.058959] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07 [ 0.060001] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU 1/0x2 -> Node 0 [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 2 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.144080] CPU1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07 [ 0.144089] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.148124] Booting processor 2 APIC 0x3 ip 0x6000 [ 0.008000] Initializing CPU#2 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU 2/0x3 -> Node 0 [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 3 [ 0.008000] CPU2: Thermal monitoring enabled (TM2) [ 0.236083] CPU2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07 [ 0.236089] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.240070] Booting processor 3 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#3 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU 3/0x1 -> Node 0 [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU3: Thermal monitoring enabled (TM2) [ 0.328028] CPU3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07 [ 0.328034] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.332019] Brought up 4 CPUs [ 0.332022] Total of 4 processors activated (18664.94 BogoMIPS). [ 0.333291] CPU0 attaching sched-domain: [ 0.333295] domain 0: span 0,3 level MC [ 0.333296] groups: 0 3 [ 0.333300] domain 1: span 0-3 level CPU [ 0.333302] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048) [ 0.333309] CPU1 attaching sched-domain: [ 0.333310] domain 0: span 1-2 level MC [ 0.333312] groups: 1 2 [ 0.333315] domain 1: span 0-3 level CPU [ 0.333317] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048) [ 0.333322] CPU2 attaching sched-domain: [ 0.333324] domain 0: span 1-2 level MC [ 0.333325] groups: 2 1 [ 0.333328] domain 1: span 0-3 level CPU [ 0.333330] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048) [ 0.333335] CPU3 attaching sched-domain: [ 0.333337] domain 0: span 0,3 level MC [ 0.333339] groups: 3 0 [ 0.333342] domain 1: span 0-3 level CPU [ 0.333343] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048) [ 0.333454] devtmpfs: initialized [ 0.337154] regulator: core version 0.5 [ 0.337154] NET: Registered protocol family 16 [ 0.337154] ACPI: bus type pci registered [ 0.337154] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.337154] PCI: MCFG area at e0000000 reserved in E820 [ 0.338371] PCI: Using MMCONFIG at e0000000 - e3ffffff [ 0.338373] PCI: Using configuration type 1 for base access [ 0.340213] bio: create slab <bio-0> at 0 [ 0.340439] ACPI: EC: Look up EC in DSDT [ 0.347091] ACPI: Interpreter enabled [ 0.347100] ACPI: (supports S0 S3 S4 S5) [ 0.347121] ACPI: Using IOAPIC for interrupt routing [ 0.351393] ACPI: No dock devices found. [ 0.351489] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.351570] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.351573] pci 0000:00:01.0: PME# disabled [ 0.351630] pci 0000:00:1a.0: reg 20 io port: [0xd100-0xd11f] [ 0.351686] pci 0000:00:1a.1: reg 20 io port: [0xd200-0xd21f] [ 0.351743] pci 0000:00:1a.2: reg 20 io port: [0xd000-0xd01f] [ 0.351791] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe9104000-0xe91043ff] [ 0.351857] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe9100000-0xe9103fff] [ 0.351890] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.351893] pci 0000:00:1b.0: PME# disabled [ 0.351945] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.351948] pci 0000:00:1c.0: PME# disabled [ 0.352014] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.352017] pci 0000:00:1c.4: PME# disabled [ 0.352073] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.352081] pci 0000:00:1c.5: PME# disabled [ 0.352125] pci 0000:00:1d.0: reg 20 io port: [0xd300-0xd31f] [ 0.352181] pci 0000:00:1d.1: reg 20 io port: [0xd400-0xd41f] [ 0.352237] pci 0000:00:1d.2: reg 20 io port: [0xd500-0xd51f] [ 0.352286] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe9105000-0xe91053ff] [ 0.352459] pci 0000:00:1f.2: reg 10 io port: [0xd600-0xd607] [ 0.352463] pci 0000:00:1f.2: reg 14 io port: [0xd700-0xd703] [ 0.352468] pci 0000:00:1f.2: reg 18 io port: [0xd800-0xd807] [ 0.352473] pci 0000:00:1f.2: reg 1c io port: [0xd900-0xd903] [ 0.352478] pci 0000:00:1f.2: reg 20 io port: [0xda00-0xda0f] [ 0.352482] pci 0000:00:1f.2: reg 24 io port: [0xdb00-0xdb0f] [ 0.352519] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe9106000-0xe91060ff] [ 0.352530] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.352565] pci 0000:00:1f.5: reg 10 io port: [0xdd00-0xdd07] [ 0.352570] pci 0000:00:1f.5: reg 14 io port: [0xde00-0xde03] [ 0.352575] pci 0000:00:1f.5: reg 18 io port: [0xdf00-0xdf07] [ 0.352579] pci 0000:00:1f.5: reg 1c io port: [0xe000-0xe003] [ 0.352584] pci 0000:00:1f.5: reg 20 io port: [0xe100-0xe10f] [ 0.352589] pci 0000:00:1f.5: reg 24 io port: [0xe200-0xe20f] [ 0.352635] pci 0000:01:00.0: reg 10 32bit mmio: [0xe4000000-0xe4ffffff] [ 0.352642] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.352649] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xd0000000-0xd1ffffff] [ 0.352654] pci 0000:01:00.0: reg 24 io port: [0xa000-0xa07f] [ 0.352658] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 0.352701] pci 0000:01:00.1: reg 10 32bit mmio: [0xe6000000-0xe6003fff] [ 0.352830] pci 0000:00:01.0: bridge io port: [0xa000-0xafff] [ 0.352832] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe6ffffff] [ 0.352836] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff] [ 0.352920] pci 0000:03:00.0: reg 10 io port: [0xb000-0xb007] [ 0.352928] pci 0000:03:00.0: reg 14 io port: [0xb100-0xb103] [ 0.352936] pci 0000:03:00.0: reg 18 io port: [0xb200-0xb207] [ 0.352944] pci 0000:03:00.0: reg 1c io port: [0xb300-0xb303] [ 0.352953] pci 0000:03:00.0: reg 20 io port: [0xb400-0xb40f] [ 0.353017] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.353068] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] [ 0.353071] pci 0000:00:1c.4: bridge 32bit mmio: [0xe7000000-0xe7ffffff] [ 0.353114] pci 0000:04:00.0: reg 10 io port: [0xc000-0xc0ff] [ 0.353132] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xe9010000-0xe9010fff] [ 0.353144] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xe9000000-0xe900ffff] [ 0.353152] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.353186] pci 0000:04:00.0: supports D1 D2 [ 0.353188] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.353192] pci 0000:04:00.0: PME# disabled [ 0.360087] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff] [ 0.360090] pci 0000:00:1c.5: bridge 32bit mmio: [0xe8000000-0xe8ffffff] [ 0.360095] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xe9000000-0xe90fffff] [ 0.360135] pci 0000:00:1e.0: transparent bridge [ 0.360159] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.360294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.360348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.360407] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.360453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.375632] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.375719] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.375803] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.375888] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.375972] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.376069] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.376158] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.376242] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.376348] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.376351] vgaarb: loaded [ 0.376367] PCI: Using ACPI for IRQ routing [ 0.376367] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.376367] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.388018] Switching to clocksource tsc [ 0.389119] pnp: PnP ACPI init [ 0.389130] ACPI: bus type pnp registered [ 0.391019] pnp: PnP ACPI: found 11 devices [ 0.391021] ACPI: ACPI bus type pnp unregistered [ 0.391029] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.391031] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.391034] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.391036] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.391039] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.391044] system 00:07: ioport range 0x400-0x4bf has been reserved [ 0.391049] system 00:08: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.391054] system 00:09: iomem range 0xce200-0xcffff has been reserved [ 0.391056] system 00:09: iomem range 0xf0000-0xf7fff could not be reserved [ 0.391059] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 0.391061] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 0.391064] system 00:09: iomem range 0xbfee0000-0xbfefffff could not be reserved [ 0.391066] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.391069] system 00:09: iomem range 0x100000-0xbfedffff could not be reserved [ 0.391071] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.391074] system 00:09: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.391076] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.391079] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.391081] system 00:09: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.391084] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved [ 0.391086] system 00:09: iomem range 0xe0000-0xeffff has been reserved [ 0.395920] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.395923] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.395926] pci 0000:00:01.0: MEM window: 0xe4000000-0xe6ffffff [ 0.395928] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff [ 0.395932] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.395935] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.395939] pci 0000:00:1c.0: MEM window: 0xe9200000-0xe93fffff [ 0.395942] pci 0000:00:1c.0: PREFETCH window: 0x000000e9400000-0x000000e95fffff [ 0.395947] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.395950] pci 0000:00:1c.4: IO window: 0xb000-0xbfff [ 0.395954] pci 0000:00:1c.4: MEM window: 0xe7000000-0xe7ffffff [ 0.395957] pci 0000:00:1c.4: PREFETCH window: 0x000000e9600000-0x000000e97fffff [ 0.395962] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.395965] pci 0000:00:1c.5: IO window: 0xc000-0xcfff [ 0.395969] pci 0000:00:1c.5: MEM window: 0xe8000000-0xe8ffffff [ 0.395972] pci 0000:00:1c.5: PREFETCH window: 0x000000e9000000-0x000000e90fffff [ 0.395977] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.395979] pci 0000:00:1e.0: IO window: disabled [ 0.395982] pci 0000:00:1e.0: MEM window: disabled [ 0.395985] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.395994] alloc irq_desc for 16 on node -1 [ 0.395996] alloc kstat_irqs on node -1 [ 0.396001] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.396004] pci 0000:00:01.0: setting latency timer to 64 [ 0.396011] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.396014] pci 0000:00:1c.0: setting latency timer to 64 [ 0.396021] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.396024] pci 0000:00:1c.4: setting latency timer to 64 [ 0.396030] alloc irq_desc for 17 on node -1 [ 0.396031] alloc kstat_irqs on node -1 [ 0.396034] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.396037] pci 0000:00:1c.5: setting latency timer to 64 [ 0.396043] pci 0000:00:1e.0: setting latency timer to 64 [ 0.396046] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.396048] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.396050] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.396052] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe6ffffff] [ 0.396054] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff] [ 0.396057] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.396058] pci_bus 0000:02: resource 1 mem: [0xe9200000-0xe93fffff] [ 0.396060] pci_bus 0000:02: resource 2 pref mem [0xe9400000-0xe95fffff] [ 0.396062] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] [ 0.396064] pci_bus 0000:03: resource 1 mem: [0xe7000000-0xe7ffffff] [ 0.396066] pci_bus 0000:03: resource 2 pref mem [0xe9600000-0xe97fffff] [ 0.396068] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff] [ 0.396070] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe8ffffff] [ 0.396072] pci_bus 0000:04: resource 2 pref mem [0xe9000000-0xe90fffff] [ 0.396074] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.396076] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.396102] NET: Registered protocol family 2 [ 0.396320] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.397548] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.400701] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.401081] TCP: Hash tables configured (established 524288 bind 65536) [ 0.401083] TCP reno registered [ 0.401198] NET: Registered protocol family 1 [ 0.401360] pci 0000:01:00.0: Boot video device [ 0.401418] Unpacking initramfs... [ 0.599403] Freeing initrd memory: 9545k freed [ 0.602781] audit: initializing netlink socket (disabled) [ 0.602793] type=2000 audit(1294506157.599:1): initialized [ 0.606070] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.607392] VFS: Disk quotas dquot_6.5.2 [ 0.607436] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.607510] msgmni has been set to 16013 [ 0.607958] alg: No test for stdrng (krng) [ 0.608013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.608016] io scheduler noop registered [ 0.608017] io scheduler anticipatory registered [ 0.608019] io scheduler deadline registered [ 0.608044] io scheduler cfq registered (default) [ 0.608136] alloc irq_desc for 24 on node -1 [ 0.608138] alloc kstat_irqs on node -1 [ 0.608147] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.608152] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.608226] alloc irq_desc for 25 on node -1 [ 0.608227] alloc kstat_irqs on node -1 [ 0.608233] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.608239] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.608327] alloc irq_desc for 26 on node -1 [ 0.608329] alloc kstat_irqs on node -1 [ 0.608336] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.608342] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.608434] alloc irq_desc for 27 on node -1 [ 0.608435] alloc kstat_irqs on node -1 [ 0.608441] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.608447] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.609741] Linux agpgart interface v0.103 [ 0.609786] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.610064] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.610112] PNP: No PS/2 controller found. Probing ports directly. [ 0.610461] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.610468] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.610582] mice: PS/2 mouse device common for all mice [ 0.610651] rtc_cmos 00:04: RTC can wake from S4 [ 0.610680] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.610702] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.610711] cpuidle: using governor ladder [ 0.610713] cpuidle: using governor menu [ 0.610717] No iBFT detected. [ 0.610983] TCP cubic registered [ 0.611072] NET: Registered protocol family 10 [ 0.611449] lo: Disabled Privacy Extensions [ 0.611679] Mobile IPv6 [ 0.611681] NET: Registered protocol family 17 [ 0.611761] PM: Resume from disk failed. [ 0.611769] registered taskstats version 1 [ 0.612142] rtc_cmos 00:04: setting system clock to 2011-01-08 17:02:38 UTC (1294506158) [ 0.612173] Initalizing network drop monitor service [ 0.612208] Freeing unused kernel memory: 592k freed [ 0.612339] Write protecting the kernel read-only data: 4232k [ 0.674236] udev[79]: starting version 164 [ 0.726703] usbcore: registered new interface driver usbfs [ 0.726730] usbcore: registered new interface driver hub [ 0.726762] usbcore: registered new device driver usb [ 0.731375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.731410] alloc irq_desc for 18 on node -1 [ 0.731413] alloc kstat_irqs on node -1 [ 0.731421] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.731457] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.731460] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.731481] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.732215] SCSI subsystem initialized [ 0.732724] uhci_hcd: USB Universal Host Controller Interface driver [ 0.735398] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.735415] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe9104000 [ 0.744984] libata version 3.00 loaded. [ 0.746982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.747002] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.747050] r8169 0000:04:00.0: setting latency timer to 64 [ 0.747089] alloc irq_desc for 28 on node -1 [ 0.747091] alloc kstat_irqs on node -1 [ 0.747103] r8169 0000:04:00.0: irq 28 for MSI/MSI-X [ 0.747588] eth0: RTL8168c/8111c at 0xffffc90000c5c000, 00:1f:d0:88:79:c6, XID 1c4000c0 IRQ 28 [ 0.747843] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.747864] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.747866] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.747868] usb usb1: Product: EHCI Host Controller [ 0.747869] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd [ 0.747871] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.747942] usb usb1: configuration #1 chosen from 1 choice [ 0.747972] hub 1-0:1.0: USB hub found [ 0.747981] hub 1-0:1.0: 6 ports detected [ 0.748050] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.748058] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.748061] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.748074] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 0.748110] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d100 [ 0.748150] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.748152] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.748154] usb usb2: Product: UHCI Host Controller [ 0.748155] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 0.748157] usb usb2: SerialNumber: 0000:00:1a.0 [ 0.748257] usb usb2: configuration #1 chosen from 1 choice [ 0.748307] hub 2-0:1.0: USB hub found [ 0.748314] hub 2-0:1.0: 2 ports detected [ 0.748372] alloc irq_desc for 23 on node -1 [ 0.748373] alloc kstat_irqs on node -1 [ 0.748378] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.748389] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.748391] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.748400] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 0.749844] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.749872] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 0.749934] scsi0 : pata_jmicron [ 0.750211] scsi1 : pata_jmicron [ 0.750842] ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16 [ 0.750845] ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16 [ 0.752308] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.752322] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe9105000 [ 0.767832] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.767847] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.767850] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.767852] usb usb3: Product: EHCI Host Controller [ 0.767854] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd [ 0.767855] usb usb3: SerialNumber: 0000:00:1d.7 [ 0.767918] usb usb3: configuration #1 chosen from 1 choice [ 0.767945] hub 3-0:1.0: USB hub found [ 0.767951] hub 3-0:1.0: 6 ports detected [ 0.768035] alloc irq_desc for 21 on node -1 [ 0.768038] alloc kstat_irqs on node -1 [ 0.768045] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.768052] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.768055] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.768066] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.768098] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d200 [ 0.768130] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.768132] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.768134] usb usb4: Product: UHCI Host Controller [ 0.768136] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 0.768137] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.768205] usb usb4: configuration #1 chosen from 1 choice [ 0.768232] hub 4-0:1.0: USB hub found [ 0.768238] hub 4-0:1.0: 2 ports detected [ 0.768284] ata_piix 0000:00:1f.2: version 2.13 [ 0.768295] alloc irq_desc for 19 on node -1 [ 0.768296] alloc kstat_irqs on node -1 [ 0.768300] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.768304] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.768340] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.768412] scsi2 : ata_piix [ 0.768500] scsi3 : ata_piix [ 0.769112] ata3: SATA max UDMA/133 cmd 0xd600 ctl 0xd700 bmdma 0xda00 irq 19 [ 0.769117] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd900 bmdma 0xda08 irq 19 [ 0.769175] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.769184] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.769192] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.769200] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.769229] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d000 [ 0.769261] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.769263] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.769264] usb usb5: Product: UHCI Host Controller [ 0.769266] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 0.769268] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.769319] usb usb5: configuration #1 chosen from 1 choice [ 0.769344] hub 5-0:1.0: USB hub found [ 0.769349] hub 5-0:1.0: 2 ports detected [ 0.769398] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.769401] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.769433] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.769554] scsi4 : ata_piix [ 0.769630] scsi5 : ata_piix [ 0.770129] ata5: SATA max UDMA/133 cmd 0xdd00 ctl 0xde00 bmdma 0xe100 irq 19 [ 0.770133] ata6: SATA max UDMA/133 cmd 0xdf00 ctl 0xe000 bmdma 0xe108 irq 19 [ 0.770180] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.770186] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.770189] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.770199] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.770224] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d300 [ 0.770260] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.770262] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.770264] usb usb6: Product: UHCI Host Controller [ 0.770265] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 0.770267] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.770330] usb usb6: configuration #1 chosen from 1 choice [ 0.770361] hub 6-0:1.0: USB hub found [ 0.770366] hub 6-0:1.0: 2 ports detected [ 0.770412] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.770417] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.770420] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.770430] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.770452] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400 [ 0.770482] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.770484] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.770486] usb usb7: Product: UHCI Host Controller [ 0.770488] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 0.770489] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.770551] usb usb7: configuration #1 chosen from 1 choice [ 0.770575] hub 7-0:1.0: USB hub found [ 0.770580] hub 7-0:1.0: 2 ports detected [ 0.770627] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.770633] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.770635] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.770642] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.770664] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d500 [ 0.770693] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.770695] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.770697] usb usb8: Product: UHCI Host Controller [ 0.770698] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 0.770700] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.770746] usb usb8: configuration #1 chosen from 1 choice [ 0.770771] hub 8-0:1.0: USB hub found [ 0.770777] hub 8-0:1.0: 2 ports detected [ 0.969212] ata1.00: HPA detected: current 156299375, native 156301488 [ 0.969217] ata1.00: ATA-7: ST380215A, 3.AAC, max UDMA/100 [ 0.969220] ata1.00: 156299375 sectors, multi 16: LBA48 [ 1.012844] ata1.01: ATA-7: ST3250824A, 3.AAH, max UDMA/100 [ 1.012847] ata1.01: 488397168 sectors, multi 16: LBA48 [ 1.060011] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.060853] ata1.00: configured for UDMA/100 [ 1.098571] ata5: SATA link down (SStatus 0 SControl 300) [ 1.109157] ata6: SATA link down (SStatus 0 SControl 300) [ 1.109172] ata1.01: configured for UDMA/100 [ 1.109278] scsi 0:0:0:0: Direct-Access ATA ST380215A 3.AA PQ: 0 ANSI: 5 [ 1.109436] scsi 0:0:1:0: Direct-Access ATA ST3250824A 3.AA PQ: 0 ANSI: 5 [ 1.192306] usb 1-3: New USB device found, idVendor=0424, idProduct=2514 [ 1.192309] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.192397] usb 1-3: configuration #1 chosen from 1 choice [ 1.192607] hub 1-3:1.0: USB hub found [ 1.192672] hub 1-3:1.0: 2 ports detected [ 1.430606] ata4.00: SATA link down (SStatus 0 SControl 300) [ 1.430622] ata4.01: SATA link down (SStatus 0 SControl 300) [ 1.464159] usb 1-3.1: new low speed USB device using ehci_hcd and address 3 [ 1.560018] usb 1-3.1: New USB device found, idVendor=046d, idProduct=c05a [ 1.560021] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.560023] usb 1-3.1: Product: USB Optical Mouse [ 1.560025] usb 1-3.1: Manufacturer: Logitech [ 1.560090] usb 1-3.1: configuration #1 chosen from 1 choice [ 1.588058] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.588071] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.601692] ata3.00: ATAPI: Optiarc DVD RW AD-5200S, 1.05, max UDMA/100 [ 1.629128] ata3.01: HPA detected: current 1953523055, native 1953525168 [ 1.629132] ata3.01: ATA-8: ST31000333AS, SD15, max UDMA/133 [ 1.629134] ata3.01: 1953523055 sectors, multi 16: LBA48 NCQ (not used) [ 1.629146] ata3.01: WARNING: device requires firmware update to be fully functional. [ 1.629148] ata3.01: contact the vendor or visit http://ata.wiki.kernel.org. [ 1.632637] usb 1-3.2: new low speed USB device using ehci_hcd and address 4 [ 1.644262] ata3.00: configured for UDMA/100 [ 1.703614] ata3.01: configured for UDMA/133 [ 1.705867] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-5200S 1.05 PQ: 0 ANSI: 5 [ 1.706038] scsi 2:0:1:0: Direct-Access ATA ST31000333AS SD15 PQ: 0 ANSI: 5 [ 1.710341] usbcore: registered new interface driver hiddev [ 1.712200] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1:1.0/input/input1 [ 1.712266] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.7-3.1/input0 [ 1.712289] usbcore: registered new interface driver usbhid [ 1.712291] usbhid: v2.6:USB HID core driver [ 1.716317] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.716366] sd 0:0:0:0: [sda] Write Protect is off [ 1.716369] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.716389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.716525] sda:sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.718329] Uniform CD-ROM driver Revision: 3.20 [ 1.718419] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.718539] sd 2:0:1:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.718588] sd 2:0:1:0: [sdc] Write Protect is off [ 1.718591] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.718611] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.718771] sdc: sda1 sda2 < [ 1.733504] sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.743464] sdc1 [ 1.743664] sd 2:0:1:0: [sdc] Attached SCSI disk [ 1.749565] sda5 > [ 1.749619] sd 0:0:1:0: [sdb] Write Protect is off [ 1.749621] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.749644] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.749826] sdb: [ 1.763374] usb 1-3.2: New USB device found, idVendor=177f, idProduct=0060 [ 1.763377] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.763379] usb 1-3.2: Product: Sweex USB keyboard [ 1.763381] usb 1-3.2: Manufacturer: Sweex keyboard [ 1.763465] usb 1-3.2: configuration #1 chosen from 1 choice [ 1.767634] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.767705] sdb1 sdb2 [ 1.769285] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.773119] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.773492] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.773596] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 1.773646] input: Sweex keyboard Sweex USB keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input2 [ 1.773695] sd 2:0:1:0: Attached scsi generic sg3 type 0 [ 1.773736] generic-usb 0003:177F:0060.0002: input,hidraw1: USB HID v1.10 Keyboard [Sweex keyboard Sweex USB keyboard] on usb-0000:00:1a.7-3.2/input0 [ 1.790709] input: Sweex keyboard Sweex USB keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.1/input/input3 [ 1.790775] generic-usb 0003:177F:0060.0003: input,hidraw2: USB HID v1.10 Device [Sweex keyboard Sweex USB keyboard] on usb-0000:00:1a.7-3.2/input1 [ 2.479031] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 3.382271] udev[508]: starting version 164 [ 3.701499] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 3.702284] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 3.702292] ACPI: Power Button [PWRB] [ 3.702359] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 3.702363] ACPI: Power Button [PWRF] [ 3.717525] ACPI: SSDT 00000000bfee7f80 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 3.717682] Marking TSC unstable due to TSC halts in idle [ 3.717791] Switching to clocksource hpet [ 3.718021] processor LNXCPU:00: registered as cooling_device0 [ 3.718266] ACPI: SSDT 00000000bfee8440 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 3.718486] processor LNXCPU:01: registered as cooling_device1 [ 3.718839] ACPI: SSDT 00000000bfee85a0 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 3.719028] processor LNXCPU:02: registered as cooling_device2 [ 3.719256] ACPI: SSDT 00000000bfee8700 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 3.719453] processor LNXCPU:03: registered as cooling_device3 [ 4.681441] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.738873] [drm] Initialized drm 1.1.0 20060810 [ 4.867868] Error: Driver 'pcspkr' is already registered, aborting... [ 4.867965] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.867970] nouveau 0000:01:00.0: setting latency timer to 64 [ 4.870660] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5000a2) [ 4.871690] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 4.912030] alloc irq_desc for 22 on node -1 [ 4.912032] alloc kstat_irqs on node -1 [ 4.912042] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.912095] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 4.951837] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 4.951841] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 4.951843] [drm] nouveau 0000:01:00.0: Bios version 70.16.2e.00 [ 4.951845] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid [ 4.951891] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 4.951893] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 4.951896] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 4.951899] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 4.951901] [drm] nouveau 0000:01:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07 [ 4.951904] [drm] nouveau 0000:01:00.0: 2: 0x00002261: type 0x61 idx 2 tag 0x08 [ 4.951906] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00020030 [ 4.951909] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01011312 00020030 [ 4.951911] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011310 00000000 [ 4.951913] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02022362 00020010 [ 4.951921] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD3F5 [ 5.015595] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 5.017529] [drm] nouveau 0000:01:00.0: 0xD717: Condition still not met after 20ms, skipping following opcodes [ 5.040014] [drm] nouveau 0000:01:00.0: 0xD71B: Condition still not met after 20ms, skipping following opcodes [ 5.040036] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD905 [ 5.064010] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE78C [ 5.064018] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE7CA [ 5.113578] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA0A [ 5.113580] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEA6F [ 5.136013] [drm] nouveau 0000:01:00.0: 0xEA6F: Condition still not met after 20ms, skipping following opcodes [ 5.136021] [drm] nouveau 0000:01:00.0: 0xC080: parsing output script 0 [ 5.136024] [drm] nouveau 0000:01:00.0: 0xC080: parsing output script 0 [ 5.295030] [TTM] Zone kernel: Available graphics memory: 4099692 kiB. [ 5.295032] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 5.295042] [drm] nouveau 0000:01:00.0: 1024 MiB VRAM [ 5.309514] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 5.309521] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining [ 5.310052] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 5.310055] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 5.310057] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 5.310059] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 5.310062] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 5.310107] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 5.310136] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [ 5.585019] [drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x401a0000, bo ffff88023bf23000 [ 5.591432] [drm] nouveau 0000:01:00.0: 0xC081: parsing output script 1 [ 5.591444] [drm] nouveau 0000:01:00.0: 0xC082: parsing output script 2 [ 5.591454] [drm] nouveau 0000:01:00.0: 0xBDAA: parsing clock script 0 [ 5.591751] [drm] nouveau 0000:01:00.0: 0xB980: parsing clock script 1 [ 5.596249] Console: switching to colour frame buffer device 240x75 [ 5.601776] fb0: nouveaufb frame buffer device [ 5.601778] registered panic notifier [ 5.601782] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 5.601837] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.601840] hda_intel: Disable MSI for Nvidia chipset [ 5.601889] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 6.933405] device-mapper: uevent: version 1.0.3 [ 6.933580] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 7.123105] loop: module loaded [ 8.798844] r8169: eth0: link up [ 8.798850] r8169: eth0: link up [ 19.116007] eth0: no IPv6 routers present [ 63.268876] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 63.270194] SGI XFS Quota Management subsystem [ 63.282893] JFS: nTxBlock = 8192, nTxLock = 65536 [ 63.348453] NTFS driver 2.1.29 [Flags: R/W MODULE]. [ 63.395164] QNX4 filesystem 0.2.3 registered. [ 63.511094] Btrfs loaded [ 63.674169] NTFS volume version 3.1. [ 63.674174] NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered. [ 63.675151] NTFS-fs warning (device sda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows. [ 63.993605] NTFS volume version 3.1. [ 64.245119] NTFS volume version 3.1. [ 113.930330] padlock: VIA PadLock not detected.
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 004: ID 177f:0060 Sweex
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x177f Sweex
idProduct 0x0060
bcdDevice 3.50
iManufacturer 1 Sweex keyboard
iProduct 2 Sweex USB keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 62
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 101
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 003: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc05a Optical Mouse M90
bcdDevice 54.00
iManufacturer 1 Logitech
iProduct 2 USB Optical Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 67
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0006 1x 6 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 2 TT per port
bMaxPacketSize0 64
idVendor 0x0424 Standard Microsystems Corp.
idProduct 0x2514 USB 2.0 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 1 Single TT
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 2 TT per port
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000d
Per-port power switching
Compound device
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 1 milli Ampere
DeviceRemovable 0x02
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
Port 2: 0000.0303 lowspeed power enable connect
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Attachment:
signature.asc
Description: Digital signature