Your message dated Sun, 8 Oct 2006 13:35:11 +0100 with message-id <20061008123510.GX30190@einval.com> and subject line Closing old bugs has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database)
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Beta 4 installation report (Failed)
- From: Nicolas Bonifas <nicolas.bonifas@free.fr>
- Date: Sun, 2 May 2004 15:40:24 +0200
- Message-id: <200405021540.24857.nicolas.bonifas@free.fr>
Package: installation-reports Debian-installer-version: 20040429. Got from www.debian.org/devel/debian-installer. uname -a: [Installation failed] Date: 2004, May 2nd Method: 50 Mb boot CD then network install over a NAT 110 Mb boot CD then network install over a NAT Machine: IBM Aptiva E32 Processor: Pentium MMX 233 Mhz Memory: 64 Mb Root Device: IDE 4 Gb hard drive (QUANTUM BIGFOOT_CY4320A) Root Size/partition table: [Installation failed] Output of lspci: 00:00.0 Host bridge: ALi Corporation M1531 [Aladdin IV] (rev b3) 00:02.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] (rev 07) 00:04.0 VGA compatible controller: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] (rev 9a) 00:0b.0 IDE interface: ALi Corporation M5229 IDE (rev 20) 00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [ ] Config network: [ ] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Although I downloaded the files 2 times each and burned it on 3 different CDs using 2 different CD-burners, the installation always failed while trying to load the file libc-udeb. Here are the MD5 checksums of the files I downloaded: eb2f763d967286313bd339f781ce664d sarge-i386-businesscard.iso 52a66d5290a43e17dd0216467962bfc9 sarge-i386-netinst.iso When checking CD's integrity, it says that the file ./dists/sarge/main/binary-i386/Release is corrupted. Some other minor remarks: Display is uglier on my computer with the framebuffer than without it. French translation is very incomplete. When ejecting CD while testing integrity, it says the CD is ok.
--- End Message ---
--- Begin Message ---
- To: 218032-done@bugs.debian.org, 239078-done@bugs.debian.org, 239290-done@bugs.debian.org, 246948-done@bugs.debian.org, 248055-done@bugs.debian.org, 251825-done@bugs.debian.org
- Subject: Closing old bugs
- From: Steve McIntyre <steve@einval.com>
- Date: Sun, 8 Oct 2006 13:35:11 +0100
- Message-id: <20061008123510.GX30190@einval.com>
#218032 - Descarga CD's con jigdo #239078 - install: Beta3, BIOS does not boot CD #239290 - Can not boot the CD at all #246948 - No error if CD is ejected while integrity is being tested #248055 - missing appropriate powerpc kernel on sarge CD #251825 - full cd isses: missing netcfg, missing kernel for modern macs d-i and debian CDs have seen lots of development (including a stable release and several etch betas) since the last traffic on these bugs, so I'm closing these - the reported problems should all be fixed by now. If you're still experiencing problems, please re-open or open a new bug against newer versions. Thanks, -- Steve McIntyre, Cambridge, UK. steve@einval.com Who needs computer imagery when you've got Brian Blessed?Attachment: signature.asc
Description: Digital signature
--- End Message ---