wpasupplicant issues
On Mon, Jul 11, 2011 at 4:34 AM, Robert Millan <rmh@debian.org> wrote:
> 2011/7/11 Zac Slade <krakrjak@gmail.com>:
> Thanks for testing. In case this helps, the FreeBSD Handbook has a
> lot of information about setting up WPA2 networking:
>
> http://www.freebsd.org/doc/handbook/network-wireless.html
>
> though much of it is FreeBSD-specific. Please let us know in case you
> figure it out.
I figured it out... well a little anyway. The journey to wireless
networking in kfreebsd continues.
Using the FreeBSD Handbook I was able to get the the interface to
authenticate using wpasupplicant. The example given worked like a
charm. However I did get some errors and dhclient would exit
immediately with a return code of 1.
Here's the output from wpa_supplicant showing a good connection and
persisting the connection with a rekey.
krakrjak@pleco> sudo wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
ioctl[SIOCS80211, op=20, val=0, arg_len=7]: Invalid argument
ioctl[SIOCS80211, op=20, val=0, arg_len=7]: Invalid argument
Trying to associate with 00:60:b3:25:17:66 (SSID='zoneone' freq=2427 MHz)
Associated with 00:60:b3:25:17:66
WPA: Key negotiation completed with 00:60:b3:25:17:66 [PTK=TKIP GTK=TKIP]
CTRL-EVENT-CONNECTED - Connection to 00:60:b3:25:17:66 completed
(auth) [id=0 id_str=]
WPA: Group rekeying completed with 00:60:b3:25:17:66 [GTK=TKIP]
^C
CTRL-EVENT-TERMINATING - signal 2 received
ioctl[SIOCS80211, op=20, val=0, arg_len=7]: Invalid argument
ioctl[SIOCS80211, op=20, val=0, arg_len=7]: Invalid argument
ioctl[SIOCS80211, op=20, val=0, arg_len=7]: Cannot assign requested address
ioctl[SIOCS80211, op=26, val=0, arg_len=0]: Operation not supported
--
Zac Slade
krakrjak@gmail.com
Reply to: