Re: Ethernet bonding under GNU/kFreeBSD
On 4/6/11 10:42 AM, Timo Juhani Lindfors wrote:
> Emanuele Balla <balla@staff.spin.it> writes:
>> root@zfs1:~# kldload if_lagg
>> root@zfs1:~# ifconfig lagg0 create
>> root@zfs1:~# ifconfig lagg0 up laggproto lacp laggport em2 laggport em3
>> ifconfig: laggproto: bad value
>
> Thanks for the example. Can you try if it works with ifconfig from
> FreeBSD chroot? (FAQ has steps to create one)
Thank you for the hint!
Done, and works smoothly:
root@zfs1:~# freebsd ifconfig lagg0 up laggproto lacp laggport em2
laggport em3
root@zfs1:~# freebsd ifconfig lagg0
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
ether 00:25:90:23:38:a8
inet6 fe80::21b:21ff:fe89:cf3e%lagg0 prefixlen 64 scopeid 0x6
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect
status: no carrier
laggproto lacp
laggport: em3 flags=0<>
laggport: em2 flags=0<>
--
# Emanuele Balla # #
# System & Network Engineer # Cell: +39 348 7747907 #
# Spin s.r.l. - AS6734 # Phone: +39 040 9869090 #
# Trieste # Email: balla@staff.spin.it #
Reply to: