[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#594827: installation-reports: kFreeBSD install using daily-build 20100828-3

Package: installation-reports
Severity: normal
User: debian-bsd@lists.debian.org
Usertags: kfreebsd
X-Debbugs-CC: debian-bsd@lists.debian.org

-- Package-specific info:

Boot method: CD
Image version:
Date: 2010-08-28

Machine: KVM 0.9.1
Partitions: <df -Tl will do; the raw partition table is preferred>

Disk /dev/ad0: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000b4138

    Device Boot      Start         End      Blocks   Id  System
/dev/ad0p1   *           1        2497    20051968   a5  FreeBSD
Partition 1 has different physical/logical endings:
     phys=(1023, 254, 63) logical=(2496, 122, 58)
/dev/ad0p2            2497        2611      916481    5  Extended
Partition 2 has different physical/logical beginnings (non-Linux?):
     phys=(1023, 254, 63) logical=(2496, 155, 26)
Partition 2 has different physical/logical endings:
     phys=(1023, 254, 63) logical=(2610, 180, 2)
/dev/ad0p5            2497        2611      916480   82  Linux swap /

Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/ad0s1     ufs    19418446   3013244  14851728  17% /
devfs        devfs           1         1         0 100% /dev
         linprocfs           4         4         0 100% /proc
/sys         sysfs           4         4         0 100% /sys
fdescfs    fdescfs           1         1         0 100% /dev/fd
tmpfs        tmpfs     1575252         4   1575248   1% /lib/init/rw

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [E]


In the install menus the first character isn't highlighted when the item is

Graphical desktop install went through, although on boot gdm3 gives a black
screen as reported in http://bugs.debian.org/592549 .

Despite choosing UK keyboard on install still had to do 'dpkg-reconfigure
kbdcontrol' and choose 'uk.iso.kbd' to get correct keymap on console.

The '-k' of 'lspci -knn' doesn't work. I guess this is a Linux only

lspci -nn:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC
[Natoma] [8086:1237] (rev 02)
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA
[Natoma/Triton II] [8086:7000]
00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE
[Natoma/Triton II] [8086:7010]
00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI
[8086:7113] (rev 03)
00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8]
00:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 20)


Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to submit@bugs.debian.org.

Installer lsb-release:
DISTRIB_RELEASE="6.0 (squeeze) - installer build 20100827-10:20"

Installer hardware-summary:
uname -a: GNU/kFreeBSD debian-kfreebsd-i386-3 8.1-1-486 #0 Tue Aug 17
22:35:34 CEST 2010 i686 GNU/Linux
lspci -knn: Usage: lspci [<switches>]
lspci -knn:
lspci -knn: Basic display modes:
lspci -knn: -mm		Produce machine-readable output (single -m for an
obsolete format)
lspci -knn: -t		Show bus tree
lspci -knn:
lspci -knn: Display options:
lspci -knn: -v		Be verbose (-vv for very verbose)
lspci -knn: -x		Show hex-dump of the standard part of the config space
lspci -knn: -xxx		Show hex-dump of the whole config space (dangerous;
root only)
lspci -knn: -xxxx		Show hex-dump of the 4096-byte extended config space
(root only)
lspci -knn: -b		Bus-centric view (addresses and IRQ's as seen by the bus)
lspci -knn: -D		Always show domain numbers
lspci -knn:
lspci -knn: Resolving of device ID's to names:
lspci -knn: -n		Show numeric ID's
lspci -knn: -nn		Show both textual and numeric ID's (names & numbers)
lspci -knn: -q		Query the PCI ID database for unknown ID's via DNS
lspci -knn: -qq		As above, but re-query locally cached entries
lspci -knn: -Q		Query the PCI ID database for all ID's via DNS
lspci -knn:
lspci -knn: Selection of devices:
lspci -knn: -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]	Show only
devices in selected slots
lspci -knn: -d [<vendor>]:[<device>]			Show only devices with specified ID's
lspci -knn:
lspci -knn: Other options:
lspci -knn: -i <file>	Use specified ID database instead of
lspci -knn: -M		Enable `bus mapping' mode (dangerous; root only)
lspci -knn:
lspci -knn: PCI access options:
lspci -knn: -A <method>	Use the specified PCI access method (see `-A
help' for a list)
lspci -knn: -O <par>=<val>	Set PCI access parameter (see `-O help' for a
lspci -knn: -G		Enable PCI access debugging
lspci -knn: -F <file>	Read PCI configuration dump from a given file
usb-list: Error: directory /sys/bus does not exist; is sysfs mounted?
kldstat: Id Refs Address    Size     Name
kldstat:  1    5 0xc0400000 7e6000   kfreebsd.gz
kldstat:  2    1 0xc6906000 10000    ext2fs.ko
kldstat:  3    1 0xc727a000 4000     nullfs.ko
df: Filesystem           1K-blocks      Used Available Use% Mounted on
df: /dev/md0                 42479     29940     12539  70% /
df: devfs                        1         1         0 100% /dev
df: devfs                        1         1         0 100% /dev
df: fdescfs                      1         1         0 100% /dev/fd
df: linprocfs                    4         4         0 100% /proc
df: /sys                         4         4         0 100% /sys
df: /dev/ad0s1            19418446   2942116  14922856  16% /target
df: devfs                        1         1         0 100% /dev
df: linprocfs                    4         4         0 100% /proc
df: /sys                         4         4         0 100% /sys
df: devfs                        1         1         0 100% /target/dev
free: /usr/bin/report-hw: line 59: free: not found
/proc/cmdline: BOOT_IMAGE=/kernel ro root=302
/proc/cpuinfo: processor	: 0
/proc/cpuinfo: vendor_id	: GenuineIntel
/proc/cpuinfo: cpu family	: 6
/proc/cpuinfo: model		: 7
/proc/cpuinfo: model name	: QEMU Virtual CPU version 0.9.1
/proc/cpuinfo: stepping	: 3
/proc/cpuinfo: flags		: fpu de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr xmm sse2
/proc/cpuinfo: cpu MHz		: 1995.01
/proc/cpuinfo: bogomips	: 1995.01
/proc/meminfo: 	     total:    used:	free:  shared: buffers:	 cached:
/proc/meminfo: Mem:  750157824 124813312 625344512 1916928 0 28553216
/proc/meminfo: Swap: 938475520 0 938475520
/proc/meminfo: MemTotal:    732576 kB
/proc/meminfo: MemFree:     610688 kB
/proc/meminfo: MemShared:     1872 kB
/proc/meminfo: Buffers:          0 kB
/proc/meminfo: Cached:       27884 kB
/proc/meminfo: SwapTotal:   916480 kB
/proc/meminfo: SwapFree:    916480 kB

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: kfreebsd-i386 (i686)

Kernel: kFreeBSD 8.1-1-686
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Attachment: signature.asc
Description: OpenPGP digital signature

Reply to: