Bug#1027848: On Tyan TN71-BP012 (POWER8) bookworm-DI-alpha1 shutdown is not working.
Package: installation-reports
Boot method: USB stick
Date: 2022-01-03
Machine: Tyan TN71-BP012
Processor: ppc64el POWER8 (raw), altivec supported
Memory: 133598MB
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
udev devtmpfs 63413824 0 63413824 0% /dev
tmpfs tmpfs 13358656 16960 13341696 1% /run
/dev/sda2 ext4 238263032 4465168 221621944 2% /
tmpfs tmpfs 66793024 0 66793024 0% /dev/shm
tmpfs tmpfs 5120 0 5120 0% /run/lock
tmpfs tmpfs 13358592 832 13357760 1% /run/user/1000
Output of lspci -knn (or lspci -nn):
0000:00:00.0 PCI bridge [0604]: IBM POWER8 Host Bridge (PHB3) [1014:03dc]
0001:00:00.0 PCI bridge [0604]: IBM POWER8 Host Bridge (PHB3) [1014:03dc]
0001:01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca)
Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748]
0001:02:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca)
Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748]
0001:02:02.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca)
Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748]
0001:02:08.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca)
Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748]
0001:02:09.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca)
Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748]
0001:02:0a.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca)
Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748]
0001:02:10.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca)
Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748]
0001:02:11.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca)
Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748]
0001:03:00.0 Ethernet controller [0200]: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] [15b3:1007]
Subsystem: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] [15b3:0050]
Kernel driver in use: mlx4_core
Kernel modules: mlx4_core
0001:04:00.0 Ethernet controller [0200]: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] [15b3:1007]
Subsystem: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] [15b3:0050]
Kernel driver in use: mlx4_core
Kernel modules: mlx4_core
0001:05:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11)
Subsystem: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235]
Kernel driver in use: ahci
Kernel modules: ahci
0001:06:00.0 USB controller [0c03]: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller [104c:8241] (rev 02)
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
0001:07:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150] (rev 03)
Subsystem: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150]
0001:08:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 30)
Subsystem: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000]
Kernel driver in use: ast
Kernel modules: ast
0002:00:00.0 PCI bridge [0604]: IBM POWER8 Host Bridge (PHB3) [1014:03dc]
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O] *no grub menu for boot media (USB stick) have to create menu entry in Petitboot
Detect network card: [O] *firmware non free needed.(firmware-misc-nonfree_20221214-3_all.deb) mlx4_core
Configure network: [O]
Detect media: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O] *Shutdown is not working
Comments/Problems:
Shutdown is not working,
have to press power button for 10 second or via megaRAC ordering shutdown,
for both 5.19.0-1 and 6.0.0-6 linux kernel.
For kernel 6.0.0-6 on screen is displayed:
Broadcast message from user@debian (Wed 2023...:
The system will power off now!
On serial port:
[ OK ] Stopped Set Up Additional Binary Formats.
[ OK ] Stopped Network Time Synchronization.
[ OK ] Unset automount Arbitrary …s File System Automount Point.
[ OK ] Stopped Record System Boot/Shutdown in UTMP.
[ OK ] Stopped Create Volatile Files and Directories.
[ OK ] Stopped target Local File Systems.
Unmounting /run/credentials/systemd-sysusers.service...
Unmounting /run/credential…temd-tmpfiles-setup.service...
Unmounting /run/credential…-tmpfiles-setup-dev.service...
[ OK ] Unmounted /run/credentials/systemd-sysusers.service.
[ OK ] Unmounted /run/credentials…ystemd-tmpfiles-setup.service.
[ OK ] Unmounted /run/credentials…md-tmpfiles-setup-dev.service.
[ OK ] Stopped target Preparation for Local File Systems.
[ OK ] Reached target Unmount All Filesystems.
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create System Users.
[ OK ] Stopped Remount Root and Kernel File Systems.
[ OK ] Reached target System Shutdown.
[ OK ] Reached target Late Shutdown Services.
[ OK ] Finished System Power Off.
[ OK ] Reached target System Power Off.
[ 1009.685492] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 1009.706325] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 1009.724614] systemd-journald[713]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 1009.743162] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 1009.760875] systemd-shutdown[1]: Unmounting file systems.
[ 1009.761460] [3820]: Remounting '/' read-only with options 'errors=remount-ro'.
[ 1009.776695] EXT4-fs (sda2): re-mounted. Quota mode: none.
[ 1009.781997] systemd-shutdown[1]: All filesystems unmounted.
[ 1009.782028] systemd-shutdown[1]: Deactivating swaps.
[ 1009.782093] systemd-shutdown[1]: All swaps deactivated.
[ 1009.782122] systemd-shutdown[1]: Detaching loop devices.
[ 1009.782401] systemd-shutdown[1]: All loop devices detached.
[ 1009.782524] systemd-shutdown[1]: Stopping MD devices.
[ 1009.782669] systemd-shutdown[1]: All MD devices stopped.
[ 1009.782694] systemd-shutdown[1]: Detaching DM devices.
[ 1009.782833] systemd-shutdown[1]: All DM devices detached.
[ 1009.782859] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[ 1009.784906] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 1009.785242] systemd-shutdown[1]: Powering off.
But the system isn't powering off,
have to press power bouton or ordering shut down via Megarac.
(was working with 11.6)
Best Regards
Olivier
Reply to: