Bug#1053937: Aw: Re: Bug#1053937: debian-installer: installer does not detect internal UFS-drive
Hi Cyril :)
Cyril Brulebois wrote:
> Looking around, it seems “ufshci-module” is a best guess name for what
> the industry calls UFSHCI, and seems to be shipped as ufshcd-core.ko
> (ufs/core) and ufshcd-pci.ko (ufs/host).
$ lsmod | grep ufs
ufshcd_pci 20480 0
ufshcd_core 262144 3 ufshcd_pci
scsi_mod 286720 3 sd_mod,sg,ufshcd_core
> I've built a test netboot-gtk installation image; contrary to a full
> netinst ISO, there's no firmware in there, but I thought it might be
> good enough for you to test and report whether the storage appears,
> without going through the whole installation process.
> https://people.debian.org/~kibi/bug-1053937/
YES! Thank you, works perfectly. I can see the drive and all partitions.
Of course an alpha installer for trixie with ufs would be nice, as most people with a surface go 4 probably want Gnome 45...
By the way, this is the lspci -vv entry of the drive:
00:12.7 Universal Flash Storage controller: Intel Corporation Device 54ff (prog-if 01 [UFSHCI])
Subsystem: Intel Corporation Device 7270
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
IOMMU group: 7
Region 0: Memory at 60e9153000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: ufshcd
Kernel modules: ufshcd_pci
hwinfo:
29: PCI 12.7: 0109 Mass storage controller
[Created at pci.386]
Unique ID: Gd_A.0f3BFfhdmt1
SysFS ID: /devices/pci0000:00/0000:00:12.7
SysFS BusID: 0000:00:12.7
Hardware Class: storage
Model: "Intel Mass storage controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x54ff
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x7270
Driver: "ufshcd"
Driver Modules: "ufshcd_pci"
Memory Range: 0x60e9153000-0x60e9153fff (rw,non-prefetchable)
IRQ: 18 (18496 events)
Module Alias: "pci:v00008086d000054FFsv00008086sd00007270bc01sc09i01"
Driver Info #0:
Driver Status: ufshcd_pci is active
Driver Activation Cmd: "modprobe ufshcd_pci"
Config Status: cfg=new, avail=yes, need=no, active=unknown
40: SCSI 00.0: 10600 Disk
[Created at block.255]
Unique ID: R7kM.7vZj0wQ2tpB
Parent ID: Gd_A.0f3BFfhdmt1
SysFS ID: /class/block/sda
SysFS BusID: 0:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:12.7/host0/target0:0:0/0:0:0:0
Hardware Class: disk
Model: "SKhynix HN8T15DEHKX075"
Vendor: "SKhynix"
Device: "HN8T15DEHKX075"
Revision: "A801"
Serial ID: "2F0F13D97400"
Driver: "ufshcd", "sd"
Driver Modules: "ufshcd_pci", "sd_mod"
Device File: /dev/sda (/dev/sg3)
Device Files: /dev/sda, /dev/disk/by-diskseq/1, /dev/disk/by-id/scsi-1SKhynix, /dev/disk/by-path/pci-0000:00:12.7-scsi-0:0:0:0
Device Number: block 8:0-8:15 (char 21:3)
BIOS id: 0x80
Geometry (Logical): CHS 3889/255/63
Size: 62486528 sectors a 4096 bytes
Capacity: 238 GB (255944818688 bytes)
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #29 (Mass storage controller)
Thanks for all your work!
Reply to: